Our LiFePO4 batteries are made to order so we can make any size you require with custom BMS to suit your application. If you require a specific BMS then please let us know details of your peak and continuous loads when ordering. These banks are made up from 3.2V LiFePO4 cells. If you require just cells on their own for a project we can provide them as well.
Battery Type: 3.2V single LiFePo4 Battery, LIFEPO4 Battery Bank;
Voltage: 3.2V, 12V, 24V, 36V, 48V, 72V, 96V, 144V, 256V, 320V;
Capacity: 100Ah to 500Ah;
Higher operating voltage of 3.2V and energy density:
Lithium lron Phosphate battery delivers and maintains a stable operating voltage of over 3.2V until final discharge— three times as much voltage as a Ni-Cd or Ni-Mh battery provides.it takes just 1/3 the number of lithium ion batteries to provide the equivalent amount of voltage form Ni-Cd or Ni-MH batteries, so portable devices can be made much smaller and ligher.
Higher discharge rate for more powerful devices:
Lithium lron Phosphate batteries are capable of outstanding rates of discharge(up to 20C rate or more)sufficient to power a hobby planes and helicopters, a power tool’s motor and other devices.
Stable discharge under various temperatures conditions:
Lithium lron Phosphate batteries provide stable discharge within a wide range of temperatures, form -40°C to 80°C.
Superior storage characteristics including minimal self-discharge:
Lithium lron Phosphate batteries limit self-discharge to less than 5% of the original capacity per month when batteries are stored at 20°C.
Long Cycle Life:
Lithium lron Phosphate batteries last over 2000 repeated charges and discharges, as well as offering outstanding economy.
No Memory Effect:
Lithium lron Phosphate batteries has no memory effect, seen in Ni-Cd,NI-MH, causes charging capacity to be reduced by repeated charing and discharging to in sufficient levels.
Greater resistance to overcharging. High thermal stability, never explode, never getting fire
100% Green battery for the environment,
Smallest Size, Lightest Weight
Highly efficient module giving 335W from a panel physically the same size as a 250W, great if you have limited space.
Better in low light than standard panels
LG NeON™2 335Wp solar PV module with black frame, features high efficiency 60 x LG NeON™ 2 monocrystalline cells. The LG NeON™ 2 has been designed to significantly enhance its output efficiency making it efficient even on limited roof areas.
LG NeON™ 2 has an enhanced performance warranty. The annual degradation has fallen from -0.7%/yr to -0.6%/yr. Even after 25 years, the cell guarantees 2.4%p more output than the previous NeON™modules.
The LG NeON™ 2 has been designed with aesthetics in mind; thinner wires that appear all black at a distance. LG NeON™ 2 now performs better on sunny days thanks to its improved temperature co-efficiency.
With its newly reinforced frame design, LG has extended the warranty of the NeON™ 2 for an additional 2 years. Additionally, LG NeON™2 can endure a front load up to 6000 Pa, and a rear load up to 5400 Pa.
Module dimensions: 1640 x 1000 x 40mm
Download Brochure to see how effecient and great in low light these panels are
This listing is for 1 panel, simply select how many you need in the quantity. There is NO MINIMIUM Order.
Get 5% discount for Cash On Collection Payments
Delivery from £26
First panel £26, each additional panel just £6 delivery
ie: 3 panels costs £38 delivery.
Delivery service is an economy service that hand delivers fragile items on a weekly round across the UK.
Surcharge for remote areas including parts of Wales, Scotland, Ireland and Isle of Wight, please see Delivery info
This is a safer more reliable and cheaper way for you to receive panels and saves on the huge amounts of wasted packing materials.
Pallet Shipping 25 panels per pallet:
£175 UK Mainland
£375 Rest of Europe
Or you can collect for FREE from Nr Brighton.
THE NEW VFXR-SERIES
7 Features In One Device
GENERATOR MODE - CONNECT THE VFXR TO ANY GENERATOR:
1. Cover current consumption
2. Charge batteries
SUPPORT MODE- CONNECT THE VFXR TO ANY INVERTER TO EXPAND THE OUTPUT POWER:
1. Cover consumption with your inverter (any brand)
2. Cover your additional consumption with the VFXR (in cooperation with any brand)
GRID TIED MODE - INJECT EXCESSIVE POWER TO THE GRID:
3. Charge your batteries
4. Sell not consumed power to the grid
UPS MODE - USE THE BATTERIES IF THE GRID FAILS:
5. Cover consumption with the grid
6. In case of grid failure, switch to batteries without interruption
GRIDZERO MODE - USE THE GRID IF SOLAR POWER IS NOT AVAILABLE AND COVER HIGHER LOADS WITH SMALL INVERTERS:
7. Cover consumption with solar power (even with small inverters)
8. Take additional power from the grid to double the output of your inverter
MINI GRID MODE - USE THE GRID WHEN BATTERIES ARE LOW:
9. Cover consumption with solar power
10. Connect to the grid when batteries are low
BACKUP MODE - COVER GRID FAILURES WITH YOUR SOLAR SYSTEM:
11. Cover consumption with the grid
12. In grid failure, switch to solar system
The latest, most advanced features on the industry’s most trusted and proven platform—that’s the essence of OutBack’s new FXR Series of Grid/Hybrid inverter/chargers. Capable of off-grid or grid-connected operation in a single model, the FXR Grid/Hybrid inverter/chargers provide system designers with unprecedented flexibility and compatibility for nearly
any power conversion scenario.
The new FXR features and technologies on the acclaimed FX platform include:
FXR inverter/chargers can be paired with a MATE3 to add OPTICS RE to monitor and control system performance from any location. Available in power ranges from 2000W-3000W, multiple units may be stacked and connected with other OutBack Power electronics for more seamless system integration and the ability to function in a wide variety of applications, and system sizes. Up to nine inverters can be combined in a 3-phase system with the 12V, 24V or 48V models, and up to 30kW in a grid-tied 24V or 48V system. The exclusive modular system architecture means that increased power output is just an additional FXR inverter/charger away.
Available in sealed or vented units with NEMA type 1 die-cast aluminum chassis designed to operate in the harshest environmental conditions such as high temperatures, humidity or corrosive salt air, the FXR’s continue in OutBack’s tradition of absolute dependability in mission critical installations no matter how harsh or challenging the conditions.
Please Note: The new VFXR range only work with a Mate 3 (the standard Mate or Mate B will not work with them)
For 12V Solar System: 390W solar panel (100VOC for max input voltage (92V at 25C))
For 24V Solar System: 780W solar panel (100VOC for max input voltage (92V at 25C))
IP67 Waterproof model made by Tracer with their same great MPPT functionality. With 100VOC input you can run most panels as a maxium of 2 in series. Fully program charge voltages via Optional PC cable or MT50 with special lead.
Set as default for 12V LiFePO4 batteries, can only re-program Lithium Battery Options with PC Cable and PC software. Can use MT50/bluetooth/wifi along with the special BP lead to set Flooded or Sealed batteries and settings.
No Fan for silent operation, great for vans, boats or any live in spaces
Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 30% and potentially decrease the power of solar array needed.
·Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
·Wide working environment temperature(-40℃～60℃)
·Apply to lithium battery(LiFePO4/Li-NiCoMn)and battery(Sealed/Gel/Flooded)
·Lithium battery self-activating and low temperature protection function
·Maximum conversion efficiency of 98%
·Advanced Maximum Power Point Tracking (MPPT) technology, with tracking efficiency no less than 99%
·Ultra-fast tracking speed and guaranteed tracking efficiency
·Accurately recognizing and tracking of multiple power points
·PV power limitation function
·Monitoring and setting parameter via Mobile APP, PC Monitor setting software with RS485communication interface.
·Use of standard Modbus communication protocol for RS485 bus connections, communication protocol compatibility much better
·Connecting the IOT(Internet of Things) module and Cloud Server monitoring software to realize remote monitoring of the multi-machine system
·The RS485 connector can provide power supply
·Aluminum housing for better cooling
·Real-time energy statistics function
·IP67 waterproof degree
·Long lifespan design，five years warranty
Load working mode:
·Light ON + Timer
·Intelligent Power Mode
·PV over current protection
·PV short circuit protection
·PV reverse polarity protection
·Battery reverse polarity protection
·Battery over voltage protection
·Battery over discharge protection
·Battery overheating protection
·Lithium battery low temperature protection
·Load overload protection
·Load Short circuit protection
The new MATE3 System Display and Controller makes it easy to program and monitor a complete OutBack Power System. An intuitive and integrated system configuration wizard makes system setup and programming quick and seamless.
The ability to set unique multi-level user passwords allows the user to secure critical system settings from unintended changes, while still allowing open access to necessary functions.
The MATE3 is packed full of features to make system management simple. The easy-to-read graphical LCD display is backlit for dark operating conditions. Improved tactile buttons and a user programmable “favorite” key give you immediate access to the features you want, while an intuitive scroll wheel interface allows for easy adjustment of system setpoints. Expandable SD card memory allows you to increase data logging capacity as well as upgrade units in the field.
A built-in clock and calendar function enables timer-based programming of inverter and charger operation. All of your settings are stored in permanent memory to eliminate the need to reprogram in the event of a system shutdown or battery replacement. The MATE3 is an Internet enabled device – simply connecting to the Internet will allow full remote system.
By adding the Mate Controller you can also use the outback inverters as a off grid/grid hybrid system allowing you to use the power from your batteries primarily and switching to use the grid when your batteries are low, thus minimising your use of the grid and ensuring you get the best use of your renewable power set-up, and yet never run out of power. Or you can configure an automatic generator start from them if needed.
6mm Solar Cable - Price is per meter simply select the quantity as the number of meters you want.
Double Insulated UV protected solar cable
Max load: 50A
Optional Meter for all of the New Tracer MPPT charge controllers (10A, 20A, 30A or 40A) - This is for the new BN range only
·Automatic identify the controller, and display the type, model and relevant parameter data
·Large-screen multifunction LCD displays all the operational data and system working status in digital, graphic and textual forms
·With six navigation function keys, the operation is direct, convenient and rapid
·Real-time energy statistics recording
·Both data and data flowing on the same lead ,no need for external power
·Real-time monitoring and acoustic alarm of failure information of the controller
·Longer communication distance based on RS485
More powerful function Via MT50
·Diversified load control modes : manual, light ON/OFF, Light ON+ Timer, Time Control
·Battery type selection: Gel, sealed, flooded and USER type
·Energy display function
Backlight and acoustic alarm on<65mA
Backlight off <15mA
98×98 mm / 3.86×3.86 in
114×114 mm / 4.49×4.49 in
Standard 2m, max .50m
Set of 4 Aluminium mounting brackets for mounting solar panels on vans, boats, sheds or a wooden frame as a easy cheap solar framing system.
** Panels larger than 100w are not recommended to use these alone, as a direct fixing to a vehicle roof. We suggest a bespoke solution using bolts, some of our customers use these brackets and modify them to achieve this, others get a locally fabricated solution **
Aluminium mounting brackets;
Wood screws:St5.7 mm*30mm,
Socket Head Screw:M6*25mm,
This cable is used to connect the Waterproof Tracer BP controllers to the MT50 meter.
8 Way unit can hold our Tomzn DC and AC breakers
Unit can hold the following options:
This is an empty unit, you must add the breakers you need to your cart as well, see related items tab above to see the breakers that fit.
35mm Cable - Use for connecting Batteries to Inverter
You will need 2 cables, 1 for Positive and 1 for Negative
If you need a longer cable please let us know.
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
MC4 Solar Connector - Price is per pair simply select the quantity as the number of pairs you want.
These are the standard connectors used on most solar panels.
TUV certified, brand new, water /weather proof rubber seal that can ensure excellent electrical contact for life time service.
The metal pin is made from high quality machined copper and sealed tip (compare to the cheap sheet metal pin) that can ensure excellent electrical contact for life time service.
Build in press tabs for easy disconnect, no tool is needed. 25A max load.
Wires should be crimped or soldered into the pins and care should be taken to get the correct pin into the correct connector. Once the pin is pushed into the connector it is difficult to remove without the correct tooling.
Main Technical Specification:
Maximum Current: 25A
Maximum voltage: 1000V
Maximum operating humidity: 5% -95% (No condensation)
Temperature: -40 ℃ ~ +90 ℃
Waterproof Grade: IP67
Flame class: UL94-V0
Connecting cable specifications: 2.5mm2 4mm2 6mm2
Test voltage: 6.6KV (50Hz, 1min)
Metal materials: nickel copper
Insulation material: PA12 * 1988HB
Lock mode: Self-locking
Security Level: Class ‖
Shell has a strong anti-aging, anti- UV capability; found in outdoor use under harsh environment requirements; according to different needs can be arbitrary and used in conjunction with a variety of cell junction box; all connections are using press-fit connection;
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Optional USB cable to connect Waterproof Tracer BP to PC computer to use monitoring setting software “Solar Station Monitor”
These little connectors are fantastic, they make wiring so easy, simply put the wires together and then twist the connector over the bare ends. Works for upto 6mm cables to join 2 x 6mm cables together.
Swept-wing design for comfort
Live-action, square-wire spring
Hexagonal shape for standard nutdriver
No pre-twisting required and is fully re-useable
Accept solid, stranded and flexible wires
UL Listed and CSA Certified
Shell rated for 105°C
Rated at 41A/600V
Wire combination: 0.5mm² to 6.0mm², Min. 3x0.5mm², Max. 2x6.0mm²
Ratings & Wire Size Combinations