Excellent cost effective small Nemo 500W wind turbine with MPPT controller

1. Super smalll weight
2. Super silence blades(10meter noise 58dba)
3. Super alternator output (same wind speed the output power more than other brands at least 15%.)
4. Super wind design(excelent design can be working in 3m/s to 49.2m/s wind speed) 

Popular Questions:

Q:  Do these units need spares for maintenance? 

A:  The wind generator is basically a maintenance-free system, so it does not need special maintenance.

Q:  How long do the bearings and gearbox last?

A:  The wind turbine shaft is a direct drive alternator, so there no gearbox. The bearing is Japanese NSK bearings, the design life is more than 8 years.

Rotor Diameter:47 inches (1.2m)
Weight:14.8 lbs (6.7kg)
(Shipping: 26.5”x13.8”x8.3” (672x350x210mm) / 17.2 lbs (7.8kg))
Mount:1.5” schedule 40 pipe (1.9” OD, 48 mm)
Magnetic Material: NdFeB  (Neodymium Iron Boron)
Shaft Bearing: High Standard Sealed Bearing
Shaft: Stainless Steel
Fasteners (nuts and bolts): Stainless Steel
Start-up wind speed:7 mph (3.13 m/s)
Voltage:12 and 24 VDC
Rated Power:500 watts at 31mph (14m/s)
Controller:Internal MPPT regulator
Blades:Carbon Fiber Composite
Body:Cast aluminum (Marine is powder coated for corrosion protection)
Energy Production:38 kWh/mo @12mph (5.4m/s)
Warranty:3 Year Limited Warranty
Survival Wind speed:110 mph (49.2 m/s)
Over-speed Protection:Electronic torque control
Battery Bank lead-acid Minimum:200 amp hours @ 12V, 150 amp hours @ 24V

Smart external regulator with Peak Power Tracking Controller
1. Automatic Circuit Break protection.
2. High wind protection.
3. Constant output power display LED.
4. Over charge protection.

Stops charging at 14.1V / 28.2V and restarts 13.1V / 26.2V. 

We advise an additional charging source like solar to ensure the batteries reach a full charge and to give an equalisation charge if or when required.

6mm square cable can be used for distances of 10m.  Consider multiples of 6mm for longer runs, contact us for more info.