The Sunny Island 6.0H is ideal for people who strive to be as independent as possible and want to be actively involved in shaping their own energy supply. This is true both for new plants and for plant operators who would like to retrofit their existing PV plants to emphasize self-consumption more. The battery inverter fits to all PV-plant sizes, PV- inverters and batterie typs. Depending on local conditions, it can also integrate other renewable energy generators into the storage system, such as small wind turbines, hydroelectric power facilities and CHP plants.
Developed from the successful SI-5048 these inverters are rated to give a power output of 6kW for 30 min. IP54 protection to allow outdoor installation if required and increased operating temperature range of -25 to +60 deg C.
Inverters can be combined together to assemble higher power systems and used with the Sunny Island Remote Control which gives a single point of operation.
See more at: http://www.sma.de/en/products/battery-inverters.html
NEW 670ah c20 (560 ah c5)
2 VOLT, DEEP CYCLE WITH TUBULAR POSITIVE PLATE, 1500 CYCLE LIFE EXPECTANCY TO 80% d.o.d
198mm x 83mm x 694.5mm height, 32.6kg wet
Manufactured by Eternity Technologies
Eternity Technologies battery cells have become renowned throughout the industry as being a rugged, robust premium quality product. The Eternity product is now approved and used by all the premium forklift manufacturers as listed below.
Unfortunately there are now many inferior quality battery cells being imported from all over the world which are being offered for sale throughout the UK. These cells are cheap but not so cheerful. They are offered with 5 years warranty, so you may rightly think you are covered, however this is not the case. All battery cells are warrantied against “manufacturing defects” only and not wearing out, there are also many 5 year warranties which are 3 years full and 2 pro rata; basically a 3 year warranty.
We may not always be the cheapest but we refuse to fit any of these inferior products.
The powerful measurement solution for intelligent energy management within the SMA Smart Home: The SMA Energy Meter takes phase-exact and balanced electrical measured values as a grid feed-in and purchased electricity meter and communicates these values via Speedwire. Thanks to its ability to quickly acquire measured values, the SMA Energy Meter is the ideal supplier of data for intelligent energy management within the SMA Smart Home. All PV generation data, purchased electricity and grid feed-in can be transmitted via standard Ethernet cable to the Sunny Home Manager, for example, or to the Sunny Boy Smart Energy. This, in turn, facilitates optimal energy monitoring, effective load and battery management and reliable active power limitation at the grid feed-in point while taking self-consumption into account.
Space-saving top-hat rail mounting in household distribution thanks to compact enclosure
Simple to install and commission, the Sunny Home Manager is the ideal solution for simple solar PV array monitoring and intelligent energy management. The unit provides an overview of all the energy flows taking place in the house, displays recommended actions and is able to control loads via SMA radio-controlled sockets automatically.
The device learns the typical consumption pattern of the household and combines this information with a forecast of the plant-specific PV generation.
Sunny Island systems using the Sunny Remote Control are flexible and easy to operate: to maximize the user convenience, we have moved the control unit out of the inverter. You can now commission and monitor the battery-powered inverters conveniently without having to be standing right in front of the inverter. The Sunny Remote Control can be used at a distance of up to 20 m and processes information from up to three devices. The rotary switch enables intuitive operation. The four-line display gives you information on the current plant status at a glance. An SD card serves as the service interface. Another convincing feature is the simplicity of installing the SRC-20. Just one cable is needed for the electrical connection and communication. Plug it in at both ends – and you are ready for installation, commissioning or plant information.
For use with Sunny Islands SI-2012/2224 & SI-6.0/8.0H. One remote control is needed per system and allows all settings to be made conveniently. Uses a self explanatory menu interface and rotary switch to give a single point of operation even in MultiCluster systems. Clear four line graphic display shows energy flow between the loads, battery and external energy sources together with battery state of charge status, events and errors.
Fixed Key Battery Isolator Switch
High quality metal body, Durable plastic handle
1,000AMP for up to 10 seconds
Body: 67mm Diameter, 100mm length
35mm Cable - Use for connecting Batteries to Inverter M8 - M10 (M8 one end M10 on the other end)
You will need 2 cables, 1 for Positive and 1 for Negative
If you need a longer cable please let us know.
Battery Inter-connecting Cable - 35mm cable with M10 - M10 Lugs (M10 on both ends)
Made up to size for you for connecting your batteries together.