Suitable for use with SolaX HV High Voltage Hybrid and Grid Storage inverters

Generation 2 Triple Power Battery

The perfect match to X1-Hybrid, X3-Hybrid and X1-AC, the SolaX Triple Power battery is available in 4.5 and 6.3kWh, each of which can be installed in series with up 3 more batteries of the same size (charger dependent).  

Please note: Sizes cannot be mixed. 1-3 batteries can be used in a single-phase system and 2-4 batteries in a three-phase system.

Additional features:

• Scalable to 25.2kWh
• Up to 6kW charge/discharge
• Floor and Wall Mountable
• High Voltage means thinner cables are required.
• Compact Design
• 90% Depth of discharge
• 6000 life cycles
• Easy installation – plug and play with all cables supplied

Please note this is a Battery Module only, it requires Master Box BMS to work.

Triple Power Generation2 batteries can only be matched with Generation 2 BMS.  They are NOT compatible with Generation 1 BMS or with Solax LFP 5.8kWh batteries, so please don’t mix! 

310W JA Solar Panels Mono Percium - All Black, 1657 X 996 X 35mm

Percium Cell
The latest in mono cell technology with passivated backside, local BSF and 4 Bus Bars from worldwide PV Cell leaders - JA Solar
First to reach >20.6% average cell efficiency in mass production
 
More Power Per m²
JA higher efficiency module type specially designed for UK rooftop market.
Maximise the kWp installation on the roof 
 
Aesthetics
Homogeneous Black Mono cells.
Black Frame for anti-glare and pleasing appearance.
 
Lower System Cost
Reduced installation and BOS cost
 
Excellent Low-light Performance
Enhanced spectral response at longer wavelength boosts low-light performance, which can produce more than 1% additional power compared with conventional module at system side.
 
High Reliability
Passed "3xMCS" TÜV SÜD Thresher Long life Accelerated Stress Tests.
Full range of PID-resistance tests
Harsh climate environment endurance tests
Full set of long-term reliability tests
Manufacturing inspected and certified by leading institutes such as PI-Berlin, Franhoeffer, Sgurr, OST and Solar-IF
100% in-house automatic manufacturing
2X 100% EL inspection ensuring defect-free production
Over 500MWp of JA Solar panels installed in the UK. 10GWp Worldwide.
 
Other Features
Positive power tolerance: -0~+5W
Modules binned by current to improve system performance
Excellent mechanical load resistance: Certified to withstand high wind loads (2400Pa) and snow loads (5400Pa)

Download Full Specsheet

Use with Tracer MPPT's - for a single panel on a 12V system you can use a 30A MPPT with this panel. 

This listing is for 1 panel, simply select how many you need in the quantity.  There is NO MINIMIUM Order.

X3-Hybrid HV Three Phase - HV High Voltage Battery Version - for use with SolaX HV Batteries

The new X3-Hybrid High-Voltage is the latest incarnation in battery storage inverters from SolaX.

The X3 ranges in size from 5 to 10kW and has the ability to install multiple inverters in parallel . It’s equipped with a built-in EPS (Emergency Power Supply), has multiple communication options (additional Wifi or LAN sticks can be purchased separately) and can be controlled remotely using the SolaX monitoring app, X-Cloud

Additional features:

• Unbalanced phase load supported
• Up to 25.2kWh storage per inverter
• Up to 10kW Max charge/discharge
• G100 Export Limitation compliant
• Suitable for grid trading applications
• Charging from grid possible
• Fanless design

Please note the minimum number of batteries per X3 Hybrid inverter is 2 and maximum of 4. Please note batteries need to be the same capacity, it’s not possible to connect both 4.5kWh and 6.3kWh to one inverter.

Please note this inverter is not EN50438 IE certified for Ireland. 

SolaX Gen2 Master Box BMS

Storage Systems - Communication Module

Master Box BMS MC0500 Generation 2

Master Box is required for Solax Triple Power HV battery systems.

One BMS can communicate with between 1 and 3 Triple Power batteries on single phase and between 2 and 4 Triple Power batteries on 3phase.

Solax Generation 2 BMS can only be matched with Triple Power Generation 2 batteries.  It is NOT compatible with Generation 1 Triple Power batteries, so please don’t mix. 

6mm Solar Cable - Price is per meter simply select the quantity as the number of meters you want.

Double Insulated UV protected solar cable

Max load: 50A

The Eastron SDM230 is a 100A, single phase energy meter with bi-directional energy measurement ideal for Solar PV metering. With a Modbus communication port, the unit allows for remote monitoring and can measure a wide variety of parameters. The blue back-lighted LCD screen for prefect reading makes this device suitable for industrial, residential, and utility applications.

• Measures kWh, Kvarh, KW, Kvar, KVA, PF, Hz, dmd, V, A, and more
• Bi-directional measurement IMP & EXP
• Two pulse outputs
• Din Rail mounted
• 100A direct connected
• Class 1.0 accuracy 
• 36mm width 2 module

For Solax X1, X1-AC and X1-Fit inverters only. 

MC4 Solar Connector - Price is per MC4 pair simply select the quantity as the number of MC4 pairs you want.

These are the standard connectors used on most solar panels.

Amphenol Industrial Solar Technologies’ H4 PV Connector is one of the premiere solar connectors in the market today.

Rated Currents: 31A (2.5mm2 / 14AWG), 42A (4.0mm2 / 12AWG), 53A (6.0mm2 / 10AWG)

Features

• Fully mate-able with UTX connectors
• Long-term UV and Ozone resistance
• Highest current rating in industry
• Highest voltage rating in industry
• Complete cable assemblies available
• Low contact resistance
• UL 1500V
• TUV 1500V (Class B)
• NEC Code Compliant (no locking sleeve required)
• RoHS compliant