275W JA Solar Panels

Bargain Price - MCS Approved

Silver frame poly JAP60S01 260-280 1000V Cypress Series

MULTICRYSTALLINE SILICON SOLAR MODULE

Key features:

• JA 5BB design module reduce cell series resistance and stress between cell interconnectors improves module reliability and module conversion efficiency
• High output, up to 17.12% highest conversion efficiency
• Certified with DC IEC 1000V standard
• Anti-reflective and anti-soiling surface reduces power loss from dirt and dust
• Outstanding performance in low-light irradiance environments
• Excellent mechanical load resistance: Certified to withstand high wind loads (2400Pa) and snow loads (5400Pa)
• High salt and ammonia resistance certified by TUV NORD

Reliable quality:

• Positive power tolerance: 0_ +5 W
• Modules binned by current to improve system performance
• Potential Induced Degradation (PID) resistant in accordance to IEC62804

Comprehensive Certificates:

• IEC61215, IEC 61730, CEC listed, MCS and CE
• ISO 9001:2008: Quality management systems
• ISO 14001:2004 Environmental management systems
• BS OHSAS 18001:2007: Occupational health and safety management systems
• Environmental policy: The first solar company in China to complete Intertek’s carbon footprint evaluations program and receive green leaf mark verification for our product. 

Superior Warranty:

• 12-year product warranty
• 25-year linear power output warranty

This listing is for 1 panel, simply select how many you need in the quantity.  There is NO MINIMIUM Order.

Off-Grid Inverter SPC III Feature rich all-in-one Solar Power Converter

Outback have just launched their third generation all in one off grid inverter at an extremely affordable price.  

Alpha & OutBack Energy’s SPC III is third generation off-grid inverter with rich new functions. Its detachable LCD control module can be turned to remote panel. It’s also integrated with Bluetooth interface ready for mobile monitoring and supports USB on-the-go function to facilitate data upload/ download. Battery independency design enhances this inverter to operate without battery connected.

• Output Power Factor 1
• 1500, 3000 and 5000 Watts
• Built-in MPPT Charge Controller
• PV Array Open Circuit Voltage up to 500VDC
• Up to 4000W PV Array Power
• Detachable LCD control module with various communications. Can be turned to remote panel.
• Integrated Bluetooth for mobile monitoring (Android)
• Supports USB On-the-Go function
• Reserved communication port for BMS (RS485, CAN-BUS or RS232)
• Replaceable fan design for ease of maintenance
• Battery Independence: Supply load from Grid or PV, even battery is not available
• Configurable AC/PV output usage timer and prioritisation
• Selectable high power charging current
• Selectable input voltage range for home appliances and personal computers
• Compatible to Utility Mains or generator input
• Auto restart while AC is recovering
• Cold start function

Warranty: 2 years

Note: These are a high frequency type inverter unlike the low frequency outback VFXR range.

Download Full Spec Sheet

Download Manual

6v Platinum battery PLA-T105, 225ah

Manufactured by Platinum, as an afordable model of the Trojan T105

Consumer and trade recognised brand

Renowned Quality

6 Volt  (220ah @ 20hr rate - 180ah @ 5hr rate)

26 kg - 264mm length x 181mm wide x 276mm high

Terminals available as M8 stud LPT

Download Full Spec Sheet

This product has Cheaper Delivery to Business addresses.

35mm Cable - Use for connecting Batteries to Inverter

You will need 2 cables, 1 for Positive and 1 for Negative

If you need a longer cable please let us know.

Battery Inter-connecting Cable - 35mm cable with M8 - M8 Lugs (M8 on both ends)

Made up to size for you for connecting your batteries together.

Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.

(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)

Double Insulated UV protected solar cable

Max load: 50A

Housing: PPO
Contact resistance:5mΩ
Contacts: Copper.Tin plated 
Degree of protection: IP67 
Flame class: UL94-V0
Pin dimensions:Ø4mm 
Wire size range: 6mm2

10mm cable - Charge Controller to Batteries - 2 Meter with M8 Lug

You will need 2 cables per charge controler (Pos & Neg).  The Lugs are on 1 end only as the charge controllers have bare wire connectors.

If you need longer please let us know

Affordable DC Breaker for 35mm DIN mount.  Use with our DIN Rail as an easy and affordable breaker solution.

Current Flows from top to bottom of the breaker: 
For charge controller wire top pole to charge controller and bottom pole to battery. 
For Inverter wire top pole to battery and bottom pole to inverter.

Simple DIN mount rail 10cm long for DC or AC DIN mount breakers.  Easy solution, simply screw the rail to the wall of your electrical installation and connect the breakers to it.  Quick easy and simple solution to install breakers to your solar system.

Use with our:

• DC DIN mount breakers
• RCBO AC breakers.