Our LiFePO4 batteries are made to order so we can make any size you require with custom BMS to suit your application. If you require a specific BMS then please let us know details of your peak and continuous loads when ordering. These banks are made up from 3.2V LiFePO4 cells. If you require just cells on their own for a project we can provide them as well.
|Rated capacity||100Ah @0.3 C3A20°C|
|Peak current||100A for 30S|
Battery Type: 3.2V single LiFePo4 Battery, LIFEPO4 Battery Bank;
Voltage: 3.2V, 12V, 24V, 36V, 48V, 72V, 96V, 144V, 256V, 320V;
Capacity: 100Ah to 500Ah;
Higher operating voltage of 3.2V and energy density:
Lithium lron Phosphate battery delivers and maintains a stable operating voltage of over 3.2V until final discharge— three times as much voltage as a Ni-Cd or Ni-Mh battery provides.it takes just 1/3 the number of lithium ion batteries to provide the equivalent amount of voltage form Ni-Cd or Ni-MH batteries, so portable devices can be made much smaller and ligher.
Higher discharge rate for more powerful devices:
Lithium lron Phosphate batteries are capable of outstanding rates of discharge(up to 20C rate or more)sufficient to power a hobby planes and helicopters, a power tool’s motor and other devices.
Stable discharge under various temperatures conditions:
Lithium lron Phosphate batteries provide stable discharge within a wide range of temperatures, form -40°C to 80°C.
Superior storage characteristics including minimal self-discharge:
Lithium lron Phosphate batteries limit self-discharge to less than 5% of the original capacity per month when batteries are stored at 20°C.
Long Cycle Life:
Lithium lron Phosphate batteries last over 2000 repeated charges and discharges, as well as offering outstanding economy.
No Memory Effect:
Lithium lron Phosphate batteries has no memory effect, seen in Ni-Cd,NI-MH, causes charging capacity to be reduced by repeated charing and discharging to in sufficient levels.
Greater resistance to overcharging. High thermal stability, never explode, never getting fire
100% Green battery for the environment,
Smallest Size, Lightest Weight
Highly efficient module giving 355W from a panel physically the same size as a 250W, great if you have limited space.
Better in low light than standard panels
LG NeON™2 355Wp solar PV module with black frame, features high efficiency 60 x LG NeON™ 2 monocrystalline cells. The LG NeON™ 2 has been designed to significantly enhance its output efficiency making it efficient even on limited roof areas.
LG NeON™ 2 has an enhanced performance warranty. The annual degradation has fallen from -0.7%/yr to -0.6%/yr. Even after 25 years, the cell guarantees 2.4%p more output than the previous NeON™modules.
The LG NeON™ 2 has been designed with aesthetics in mind; thinner wires that appear all black at a distance. LG NeON™ 2 now performs better on sunny days thanks to its improved temperature co-efficiency.
With its newly reinforced frame design, LG has extended the warranty of the NeON™ 2 for an additional 2 years. Additionally, LG NeON™2 can endure a front load up to 6000 Pa, and a rear load up to 5400 Pa.
Module dimensions: 1686 x 1016 x 40mm
Download Brochure to see how effecient and great in low light these panels are
MPPT: Ultra Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remote Monitoring and Control
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.
Pure sinewave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds. Models range from 150VA to 3000VA per module.
VE.Direct allows use with VE.Direct Bluetooth adaptor to control the inverter via your phone or laptop.
Fixes without screwing holes in your roof!
Set of seven black solar panel mounting kit, including 6 brackets (4 courners and 2 sides) and cable gland. They are ideal for fixing our solar panels to any vehicle, caravan, boat, barge or even outbuildings and sheds to provide a strong, secure and aesthetically pleasing fixing method, the mounts will support the solar panel at the correct height above the surface to enable the flow of air underneath the panel and keep it cool, ensuring the solar panel functions at it's optimum. The mounts can be safely bonded to the surface removing the need to drill holes. The panel is secured by screwing or bolting it to the mounting corner, but the corner itself can be fixed with a good strong adhesive like 'Sikaflex' or 'CT1' or any polyurethane sealant to the roof. (Ensure the roof is clean and dry before attaching. If a painted roof ensure the paint is not flakey)
ABS mounts raise the panel by 25mm. Edge of panel to edge of ABS is 55mm.
We sell CT1 which is great for sticking these down, please see related products tab for different colours avaialble.
If you are fitting to a vehicle we recommend that you additionally bolt or screw the panel and mounting down as well, as the strength of these systems is only as strong as the roof type or paint on your roof!
Here is a good tutorial to get you started:
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 50A
Contacts: Copper.Tin plated
Degree of protection: IP67
Flame class: UL94-V0
Wire size range: 6mm2
6mm Solar Cable - Price is per meter simply select the quantity as the number of meters you want.
Double Insulated UV protected solar cable
Max load: 50A
4 Way unit can hold our Tomzn DC and AC breakers
Unit can hold the following options:
This is an empty unit, you must add the breakers you need to your cart as well, see related items tab above to see the breakers that fit.
For use with our stick down panels and ABS mounting kits - also great for sealing cable holes
CT1 will successfully bond:
Unique adhesion on virtually any material in most applications without the need for additional fixings. CT1 is the ultimate solution for sealing.
Excellent resistance to chemicals
Apply with a standard cartridge caulking gun or pneumatic version at approximately 6 bar (108psi)
Skin cure 23ºC 50% R.H. 8 minutes
Non-adhering 23ºC 50% R. 25minutes
Full cure time 23ºC 50% R.H. 24hrs - 6mm (48hrs - 7/12mm)
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
These little connectors are fantastic, they make wiring so easy, simply put the wires together and then twist the connector over the bare ends. Works for upto 6mm cables to join 2 x 6mm cables together.
Swept-wing design for comfort
Live-action, square-wire spring
Hexagonal shape for standard nutdriver
No pre-twisting required and is fully re-useable
Accept solid, stranded and flexible wires
UL Listed and CSA Certified
Shell rated for 105°C
Rated at 41A/600V
Wire combination: 0.5mm² to 6.0mm², Min. 3x0.5mm², Max. 2x6.0mm²
Ratings & Wire Size Combinations