Suitable for use with SolaX HV High Voltage Hybrid and Grid Storage inverters
Generation 2 Triple Power Battery
The perfect match to X1-Hybrid, X3-Hybrid and X1-AC, the SolaX Triple Power battery is available in 4.5 and 6.3kWh, each of which can be installed in series with up 3 more batteries of the same size (charger dependent).
Please note: Sizes cannot be mixed. 1-3 batteries can be used in a single-phase system and 2-4 batteries in a three-phase system.
Please note this is a Battery Module only, it requires Master Box BMS to work.
Triple Power Generation2 batteries can only be matched with Generation 2 BMS. They are NOT compatible with Generation 1 BMS or with Solax LFP 5.8kWh batteries, so please don’t mix!
X1-Hybrid HV Single Phase - HV High Voltage Battery Version - for use with SolaX HV Batteries
The third generation of the X1-Hybrid Storage Inverter is the latest to be released from SolaX and has a range of new features such as built-in EPS output that enables the end user to run off their batteries in the event of a power cut, Export Control making it possible to limit exported power and advanced connectivity making it suitable for grid-trading applications.
Other features like easy remote access with monitoring using the SolaX app – Xcloud, makes it very user (and installer) friendly while the industry-leading 10-year warranty gives great peace of mind.
Please note the minimum number of batteries per X1 Hybrid inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter.
UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All our stock meets that criteria.
310W JA Solar Panels Mono Percium - All Black, 1657 X 996 X 35mm
The latest in mono cell technology with passivated backside, local BSF and 4 Bus Bars from worldwide PV Cell leaders - JA Solar
First to reach >20.6% average cell efficiency in mass production
More Power Per m²
JA higher efficiency module type specially designed for UK rooftop market.
Maximise the kWp installation on the roof
Homogeneous Black Mono cells.
Black Frame for anti-glare and pleasing appearance.
Lower System Cost
Reduced installation and BOS cost
Excellent Low-light Performance
Enhanced spectral response at longer wavelength boosts low-light performance, which can produce more than 1% additional power compared with conventional module at system side.
Passed "3xMCS" TÜV SÜD Thresher Long life Accelerated Stress Tests.
Full range of PID-resistance tests
Harsh climate environment endurance tests
Full set of long-term reliability tests
Manufacturing inspected and certified by leading institutes such as PI-Berlin, Franhoeffer, Sgurr, OST and Solar-IF
100% in-house automatic manufacturing
2X 100% EL inspection ensuring defect-free production
Over 500MWp of JA Solar panels installed in the UK. 10GWp Worldwide.
Positive power tolerance: -0~+5W
Modules binned by current to improve system performance
Excellent mechanical load resistance: Certified to withstand high wind loads (2400Pa) and snow loads (5400Pa)
Use with Tracer MPPT's - for a single panel on a 12V system you can use a 30A MPPT with this panel.
This listing is for 1 panel, simply select how many you need in the quantity. There is NO MINIMIUM Order.
SolaX Gen2 Master Box BMS
Storage Systems - Communication Module
Master Box BMS MC0500 Generation 2
Master Box is required for Solax Triple Power HV battery systems.
One BMS can communicate with between 1 and 3 Triple Power batteries on single phase and between 2 and 4 Triple Power batteries on 3phase.
Solax Generation 2 BMS can only be matched with Triple Power Generation 2 batteries. It is NOT compatible with Generation 1 Triple Power batteries, so please don’t mix.
6mm Solar Cable - Price is per meter simply select the quantity as the number of meters you want.
Double Insulated UV protected solar cable
Max load: 50A
The Eastron SDM230 is a 100A, single phase energy meter with bi-directional energy measurement ideal for Solar PV metering. With a Modbus communication port, the unit allows for remote monitoring and can measure a wide variety of parameters. The blue back-lighted LCD screen for prefect reading makes this device suitable for industrial, residential, and utility applications.
For Solax X1, X1-AC and X1-Fit inverters only.
MC4 Solar Connector - Price is per MC4 pair simply select the quantity as the number of MC4 pairs you want.
These are the standard connectors used on most solar panels.
TUV certified, brand new, water /weather proof rubber seal that can ensure excellent electrical contact for life time service.
The metal pin is made from high quality machined copper and sealed tip (compare to the cheap sheet metal pin) that can ensure excellent electrical contact for life time service.
Build in press tabs for easy disconnect, no tool is needed. 25A max load.
Wires should be crimped or soldered into the pins and care should be taken to get the correct pin into the correct connector. Once the pin is pushed into the connector it is difficult to remove without the correct tooling.
MC4 Main Technical Specification:
Maximum Current: 25A
Maximum voltage: 1000V
Maximum operating humidity: 5% -95% (No condensation)
Temperature: -40 ℃ ~ +90 ℃
Waterproof Grade: IP67
Flame class: UL94-V0
Connecting cable specifications: 2.5mm2 4mm2 6mm2
Test voltage: 6.6KV (50Hz, 1min)
Metal materials: nickel copper
Insulation material: PA12 * 1988HB
Lock mode: Self-locking
Security Level: Class ‖
Shell has a strong anti-aging, anti- UV capability; found in outdoor use under harsh environment requirements; according to different needs can be arbitrary and used in conjunction with a variety of cell junction box; all connections are using press-fit connection;