295W MONOCRYSTALLINE SOLAR MODULE
The 54 cell, Black Plus is ideal for UK roofs due to its compact design that allows more panels to be installed in tighter spaces to maximise the solar potential of every roof. Black Plus Series is an excellent all-round module, which is sleek and robust. Proven performance, stylish appearance and high-efficiency monocrystalline PERC cells. Concealed link busbars at either end of the module provide a more elegant finish than other black modules on the market. Crafted with precision and expert skill, the Black Plus Series offers outstanding build quality and reliability.
New XTRA series - 3rd Generation MPPT - Budget Model
For 12V Solar System: 520W solar panel (100V for max input voltage)
For 24V Solar System: 1040W solar panel (100V for max input voltage)
No Fan for silent operation, great for vans, boats or any live in spaces
Budget Model with no display. Can connect MT50 for remote display.
New XTRA series has Lithium battery support (set via PC cable only)
The XTRA tracer models have a current limiting function, you can connect 1.5 times the rated power to the controller so if your on a budget you can use a smaller controller with more .5panels so that you get more power in winter or low light but don't risk overloading the controller in the summer. The output will be limited to the max listed above.
New EPEver (Tracer) series is EPsolar’s third generation of MPPT controller.
XTRA series are advanced maximum power point tracking (MPPT) charge controllers, for off grid photovoltaic systems, with display unit.
In order to maximise the energy harvest from PV arrays and simultaneously minimise the power loss within a wide range of operating conditions, XTRA series apply an advanced smart algorithm which results in up to 30% higher efficient charging, compared to a conventional pulse width modulation (PWM) charge controller. Xtra series controller have limit protection function on charging current & charging power, as well as auto derating power operation at high temperature; the above protection ensure the stability of system even at exceeded rated PV power and over temperature conditions.
Protection class IP32 and isolated RS485 communication port further improve the controller’s reliability under different application requirements. XTRA series controllers incorporate a self-adaptive three-stage charging algorithm based on a digital control circuit, which effectively prolongs the lifespan of battery and significantly improve the system performance. It also has extensive electronic protection for overcharge, over discharge, solar PV & battery reverse polarity and etc. to ensure the sustainability and durability of the off-grid solar system.
¹ If using Lithium battery, customer should use “PCsoftware” to set the lithium battery parameters
² Ingress of solid objects:Protected against solid objects over 2.5mm
² Ingress of liquids: Protected against falling drops of water, if the case is disposed up to 15 from vertical
Introducing our aluminium tilting brackets as a cheaper option to maximise the power from your solar panels.
We've used marine grade aluminium (5083) to reduce costs yet retain strength, removed the chain whilst leaving the hole so the panel can be secured to the bracket & have used marine grade stainless steel hex bolts instead of anti tamper ones - all of this has enabled us to reduce the price to £48 a pair.
We've also removed the slot so that although they still swivel they no longer tilt or fold flat to your roof however, this modification means that extra panels can be supported using just one additional upright, so a two panel bracket system can be yours from just £72 and further panels added & supported for from £24 per panel. We supply an additional hex bolt to support the middle panels.
Although our other brackets are a superior, more secure solution these new brackets offer a cheaper solution to maximise your panels output throughout the year.
Listing is for 1 mounting bracket, you must order 2 for mounting one solar panel or 3 for mounting two panels etc - SEE BELOW:
PLEASE NOTE: The fixings included for this product assume you will be installing any multiple panels in ONE ROW. Eg. If ordering a pair of these brackets, you would receive 2 Aluminium brackets, 4 Bolts, TWO fixing spindles, TWO washers and TWO wing nuts. If ordering 3 Brackets (for 2 panels in a row) you would receive 7 bolts, if ordering 4 brackets - 10 bolts, if 5 Brackets (eg. 3 panels in a row) - 13 bolts etc.
However in each case you will by default still receive TWO fixing spindles, TWO washers and TWO wing nuts PER ORDER.
IF you require more as you will not be fixing in a single row, please use the ORDER NOTES field at checkout to request more
eg 'I have 4 panels in two separate pairs, therefore I need 6 brackets and parts to go with'
Longest face - 161mm at widest point. 85mm at it’s narrowest point (before curve). 257mm long
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 10m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Class 5 flexible tinned copper conductor
Halogen-free cross-linked compound
Halogen-free cross-linked, flame retardant compound
Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link
Wire size range: 6mm2
Optional Meter for AN, BN, CN, XTRA MPPT charge controllers. DuoRacer requires the MT11, see separate listings.
Comes with 2m RJ45 cable in the box, if you need longer we have a 5m cable here 5m RJ45 Cable for MT50
PLEASE NOTE - YOU CANNOT USE THE MT50 AT THE SAME TIME AS THE BLUETOOTH / WIFI OPTIONAL ADAPTORS
·Automatic identify the controller, and display the type, model and relevant parameter data
·Large-screen multifunction LCD displays all the operational data and system working status in digital, graphic and textual forms
·With six navigation function keys, the operation is direct, convenient and rapid
·Real-time energy statistics recording
·Both data and data flowing on the same lead, no need for external power
·Real-time monitoring and acoustic alarm of failure information of the controller
·Longer communication distance based on RS485
Functions Via MT50
·Diversified load control modes : manual, light ON/OFF, Light ON+ Timer, Time Control
·Battery type selection: Gel, sealed, flooded and USER type
·Energy display function
Download Guide to change language
Backlight and acoustic alarm on<65mA
Backlight off <15mA
98×98 mm / 3.86×3.86 in
114×114 mm / 4.49×4.49 in
Standard 2m, max .50m
Please note: Older MT50s manufactured before August 2017 are not compatible with the newer XTRA and AN controllers.
Use with lithium batteries: The MT50 ( sv 2.18 version) can be used to program a lithium battery for our XTRA controllers. However it cannot do this for the Tracer-AN 60A and 100A. You must use a PC cable and software for programming lithium.
3 Way unit can hold our Tomzn DC and AC breakers
Unit can hold the following options:
Best practice would be to use this unit with no bigger than 10mm square cable and appropriately sized breakers if you are using it with glands for a water tight fit. If you are using it in an environment that is already dry and dust free the use of glands may not be necessary.
This is an empty unit, you must add the breakers you need to your cart as well, see related items tab above to see the breakers that fit.
You will also need suitable cable entry glands - please see related products tab.
|Product Depth||114 mm|
|Product Height||160 mm|
|Product Type||DIN Enclosure|
|Product Width||85 mm|
Cable Gland Entry Box, use to connect through external surface. Perfect for solar panel cables coming from outside to controller.
This comes with a cradle for keeping your MC4 connectors in place and tidy.
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
A small, low cost multimeter supplied with test leads and holster.
DMM Functions: DC Current, AC/DC Voltage, Continuity, Diode, Resistance, Transistor
No. of Digits: 3.5
DMM Response Type: Average
Display Count: 1999
Range Selection: Manual
Voltage Measure DC Max: 500V
Voltage Measure AC Max: 500V
Current Measure DC Max: 5A
Resistance Measure Max: 2Mohm