50A MPPT with max VOC 100V, 12 or 24 Volt battery

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

MPPT: Ultra Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remote Monitoring and Control
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

320W JA Solar Panels Mono Percium - All Black Half Cell, 1689 X 996 X 35mm

Half Cell Advantages

• High output power
• Less shading effect
• lower temperature coefficient
• Better mechanical loading tolerance

Supplied with 1000mm output cables and QC4.10 connectors (connects to MC4s)

Percium Cell
The latest in mono cell technology with passivated backside, local BSF and 4 Bus Bars from worldwide PV Cell leaders - JA Solar
First to reach >20.6% average cell efficiency in mass production
 
More Power Per m²
JA higher efficiency module type specially designed for UK rooftop market.
Maximise the kWp installation on the roof 
 
Aesthetics
Homogeneous Black Mono cells.
Black Frame for anti-glare and pleasing appearance.
 
Lower System Cost
Reduced installation and BOS cost
 
Excellent Low-light Performance
Enhanced spectral response at longer wavelength boosts low-light performance, which can produce more than 1% additional power compared with conventional module at system side.
 
High Reliability
Passed "3xMCS" TÜV SÜD Thresher Long life Accelerated Stress Tests.
Full range of PID-resistance tests
Harsh climate environment endurance tests
Full set of long-term reliability tests
Manufacturing inspected and certified by leading institutes such as PI-Berlin, Franhoeffer, Sgurr, OST and Solar-IF
100% in-house automatic manufacturing
2X 100% EL inspection ensuring defect-free production
Over 500MWp of JA Solar panels installed in the UK. 10GWp Worldwide.
 
Other Features
Positive power tolerance: -0~+5W
Modules binned by current to improve system performance
Excellent mechanical load resistance: Certified to withstand high wind loads (2400Pa) and snow loads (5400Pa)

Use with Tracer MPPT's - for a single panel on a 12V system you can use a 30A MPPT with this panel. 

This listing is for 1 panel, simply select how many you need in the quantity.  There is NO MINIMIUM Order.

Long Aluminium Mounting Brackets - Stick down on Boats - Rivet down on vans

Use one pair for up to 100w panels and 2 pairs larger panels

Specification:
Foot print (550mm long, 75mm wide)
Rivet plate 25mm
Panel ledge 30mm

Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.

(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)

Double Insulated UV protected solar cable

Max load: 50A

Housing: PPO
Contact resistance:5mΩ
Contacts: Copper.Tin plated 
Degree of protection: IP67 
Flame class: UL94-V0
Pin dimensions:Ø4mm 
Wire size range: 6mm2

10mm cable - Charge Controller to Batteries - 2 Meter with M8 Lug

You will need 2 cables per charge controler (Pos & Neg).  The Lugs are on 1 end only as the charge controllers have bare wire connectors.

If you need longer please let us know

Cable Gland Entry Box, use to connect through external surface.  Perfect for solar panel cables coming from outside to controller.

Affordable DC Breaker for 35mm DIN mount.  Use with our DIN Rail as an easy and affordable breaker solution.

Current Flows from top to bottom of the breaker: 
For charge controller wire top pole to charge controller and bottom pole to battery. 
For Inverter wire top pole to battery and bottom pole to inverter.

A small, low cost multimeter supplied with test leads, perfect to help you setup and test your solar installation.

• AC/DC voltage measurement
• DC current
• Resistance measurement (20R to 2MR)
• Diode and transistor tester
• Low battery indication
• Requires a 9V PP3 battery

DMM Functions: DC Current, AC/DC Voltage, Diode, Resistance  
No. of Digits: 3.5  
DMM Response Type: Average  
Display Count: 1999  
Range Selection: Manual  
Voltage Measure DC Max: 500V  
Voltage Measure AC Max: 500V  
Current Measure DC Max: 5A  
Resistance Measure Max: 2Mohm  
 

Simple DIN mount rail 10cm long for DC or AC DIN mount breakers.  Easy solution, simply screw the rail to the wall of your electrical installation and connect the breakers to it.  Quick easy and simple solution to install breakers to your solar system.

Use with our:

• DC DIN mount breakers
• RCBO AC breakers.