INSTALLERS - ENSURE ADEQUATE CABLING AND CIRCUIT PROTECTION IS CONSIDERED WHEN USING MULTIPLE BATTERIES.  NOTE - YOU CANNOT MIX BATTERY TYPES.

Introducing Sunsynk's energy storage module well designed for residential UPS and off-grid applications. Cells produced by CATL, a global leader in lithium-ion battery developement and manufacturing.

Finally, the 5.12kWh battery, which is comprised of cells produced by CATL, one of the world’s biggest battery cell producers who supply prestige car brands such as BMW, Daimler AG, Tesla, and made using LFP technology (Lithium, Iron, Phosphate). The 5.12kWh battery has 100% DoD, with 5.12kW max discharge power, a standard 5-year product warranty but when installed with a Sunsynk inverter the warranty is doubled to 10-years!

Sunsynk CATL Battery LFP 5.12kWh

Weight: 47.5 kg

Battery Type: Lithium Ion

Nominal Energy: 5120 Wh

Depth of discharge: 100.00 %

Voltage: 48 V

Continuous Discharge Rate (Normal Use): 2400 W

Maximum Discharge Rate (5 Minutes): 4800 W

Surge Discharge Rate (15 Seconds): 9600 W

Maximum Charge Rate (5 Minutes): 4800 W

WARNING NOTE - You cannot mix Sunsynk BYD, CATL, IP20 or IP65 batteries in the same system.

FOR LARGE PANEL DELIVERY TIMES, SCHEDULES AND COSTS - CLICK HERE

Super High Efficiency Mono PERC Module (CS6R-410MS)   Dimensions: 1722 X 1134 X 30mm

Cables from rear junction box are approx 1m positive and 1m negative.

CANADIAN SOLAR INC.is committed to providing high quality solar products, solar system solutions and services to customers around the world. As a leading PV project developer and manufacturer of solar modules with about 30 GW deployed around the world since 2001, Canadian Solar Inc. is one of the most bankable solar companies worldwide.

With proprietary mono wafer and cell technologies Canadian Solar have developed an extraordinary module rage. Combining the best technology and design, it also reduces LCOE and installation costs.

The Super High HiKu mono modules with dimensions of 1722 X 1134 X 30mm, have the following unique features:

MORE RELIABLE (THANKS TO HALF CUT CELL TECHNOLOGY):

• Lower internal current, lower hot spot temperature
• Cell crack risk limited to smaller area of the cell
• Innovative symmetrical module design means better shading tolerance
• Heavy snow load up to 5400Pa and increased wind load up to 3600Pa

Cell: 120 x dual-cell Mono, 156 x 78 mm

Dimensions: 1722 X 1134 X 30mm

Weight: 21.3 kg

The SunSynk 5kW AC ECCO 6.5kWp Inverter is the next generation of super hybrid inverter with a 6500W MPPT and a rated AC output of 5kW resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as;

• Dual MPPT design 
• Compatible with Lithium-ion batteries and Lead Acid batteries
• Up to 50kWh battery pack
• 5yr warranty as standard
• IP65 rated
• Anti-islanding protection
• Fully programmable power export
• Automatic switching from Grid-Tied to Off-Grid mode
• Up to 16 units with the same firmware can be paralleled 

Installations with Sunsynk products now need to be registered here to gain full activation of the warranty.  

SEG (smart Energy Guarantee) with integration to Octopuse Energy on the Sunsynk app Smart energy

SEE DOWLOADS FOR DETAILS

A modular DC bus bar  rates to 1000Amps. Can be used stand alone or to connect batteries/charge controller(s)/inverter(s) to the Lynx DC distribution system. Part of the modular Lynx distribution system.

M8 fixing points

For the Lynx product that accepts the mega fuses see: https://www.bimblesolar.com/victron-lynx-distributor

Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.

(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 10m lengths, MC4 to bare wire.)

Double Insulated UV protected solar cable

Max load: 70A in air

Our solar cable is ozone resistant according to BS EN 50396

UV resistant according to HD 605 S2 and is tested for durability according to EN 60216

Flexible tinned copper conductor

Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black

Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link

Wire size range: 6mm2

LB Series DC Switch Disconnects comply with the latest specifications for modern low voltage devices. Outstanding electrical characteristics of LB Switches with compact design, contribute to space saving installation and operational convenience. Basic construction and design of the switch makes it compact, safe and highly reliable. The switch uses polyamide glass filled material, having excellent track resistance (CTI) for Insulation to prevent flashover even in the most severe conditions. The special contact design and configuration makes the switch highly reliable to withstand high short circuit currents.

Features

• Compact and reliable
• Finger protection
• Easy installation
• Wiping contacts
• Excellent switching and high short circuit capacity

Applications

• Photovoltaic - Isolators
• Isolator
• Main Switch
• Emergency ON/OFF
• Inverter Applications
• AC / DC Changeover in Solar Pumps

Enclosure Technical

• Degree of Protection: IP66
• Switch rear mounted for easy connection
• Enclosure colour: Dark grey base and light grey cover.
• Switch mounted in ABS enclosure.
• Round padlocking device (Max.3 padlocks) to prevent the Switch from being made ON by unauthorised personnel
• Interlock Feature (Cover opens only in OFF position)
• 4 + 4 Knockouts so two strings can be wired (500V / String)
• M12 Knockouts suitable for MC4 Connectors
• Switch rated at 1500V

Comes with a really handy key for checking connections when the cover is off .

Knock outs are also screw in which is really easy

**Please note: these fuse holders are designed to be opened in a specific way (see attached diagram in downloads section for guidance). Failure to follow the correct method will result in damage to the fuse holder, which is not covered by warranty.**

Fuse holder for NH type fuses, suitable for protecting and isolating cables between the battery and inverter or PV charge controller and the battery. Integrated handle enabling use as an isolator.

The 2 pole holder can be used to fuse and isolate both positive and negative at the same time, all in the same device or the positive conductor from two charge controllers for example.

NH00 rated at  250VDC, 160A,

Choose NH00 or NH000 fuses separately

Product measures 170mm H X 84mm W X 80mm D. Surface mountable.

Kraus & Naimer AC Switch

Suitable for single phase AC connection.

Plastic enclosures, protection IP66/67, totally insulated, knock-outs.
Handle red, lockablein in the OFF-position, yellow plate backing
Dimensions (w x h x d): 100mm x 190mm X 93mm
Switch interlocked with lid to prevent opening in ‘ON’ position

NH00 high capacity fuses suitable for protection of cables from batteries to inverters or charge controllers.

Fuses are rated at 250VDC

Hazard warning label pack for on grid solar PV system

Contains all the warning labels you need for an on grid, on roof solar PV installation.

Photo is indicitive.

25mm squared cable end lug for crimping onto 25mm² multi-stranded battery cable. Heavy duty lug with flared cable entry. Tin plated copper. Made in the UK