Sunsynk 3.6kW Storage Hybrid / Sunsynk 5.12kWh
Domestic scale hybrid storage system.
The Sunsynk hybrid Inverter is modern inverter for managing power flow from multiple sources such as solar, main electrical grid and generator. This Sunsynk inverter comes paired along with a Sunsynk CATL 5.12kWh battery package, a complete storage solution providing grid-backup for loads.
Sunsynk CATL Battery LFP 5.12kWh
Weight: 47.5 kg
Battery Type: Lithium Ion
Nominal Energy: 5120 Wh
Depth of discharge: 100.00 %
Voltage: 48 V
Continuous Discharge Rate (Normal Use): 2400 W
Maximum Discharge Rate (5 Minutes): 4800 W
Surge Discharge Rate (15 Seconds): 9600 W
Maximum Charge Rate (5 Minutes): 4800 W
WARNING NOTE - You cannot mix Sunsynk BYD, CATL or IP65 batteries in the same system.
The SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68kW resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as;
Installations with Sunsynk products now need to be registered here to gain full activation of the warranty.
**Please note: these fuse holders are designed to be opened in a specific way (see attached diagram in downloads section for guidance). Failure to follow the correct method will result in damage to the fuse holder, which is not covered by warranty.**
Fuse holder for NH type fuses, suitable for protecting and isolating cables between the battery and inverter or PV charge controller and the battery. Integrated handle enabling use as an isolator.
The 2 pole holder can be used to fuse and isolate both positive and negative at the same time, all in the same device or the positive conductor from two charge controllers for example.
NH00 rated at 250VDC, 160A,
Choose NH00 or NH000 fuses separately
Product measures 170mm H X 84mm W X 80mm D. Surface mountable.
NH000 high capacity fuses suitable for protection of cables from batteries to inverters or charge controllers.
Fuses are rated at 250VDC
Hazard warning label pack for on grid solar PV system
Contains all the warning labels you need for an on grid, on roof solar PV installation.
Photo is indicitive.