Suitable for use with SolaX HV High Voltage Hybrid and Grid Storage inverters
Generation 2 Triple Power Battery
The perfect match to X1-Hybrid, X3-Hybrid and X1-AC, the SolaX Triple Power battery is available in 4.5 and 6.3kWh, each of which can be installed in series with up 3 more batteries of the same size (charger dependent).
Please note: Sizes cannot be mixed. 1-3 batteries can be used in a single-phase system and 2-4 batteries in a three-phase system.
Please note this is a Battery Module only, it requires Master Box BMS to work.
Triple Power Generation2 batteries can only be matched with Generation 2 BMS. They are NOT compatible with Generation 1 BMS or with Solax LFP 5.8kWh batteries, so please don’t mix!
X1 AC Charger
Upgrade a PV system with the X1 AC Coupled Inverter Charger from SolaX. Compatible with any brand (single phase) inverter, the X1 retro-fit has a maximum efficiency of up to 97%, is rated for indoor or outdoor use and can be remotely monitored via the XCloud.
Please note the minimum number of batteries per X1 AC inverter is 1 and maximum of 3. Please note batteries need to be the same capacity, its not possible to connect both 4.5kWh and 6.3kWh to one inverter.
UK only: This inverter has been tested and certified according to G98 or G99, but only for units having most recent Firmware and Hardware version. All our stock meets that criteria.
Please note this item it is not ‘EN50438 Ireland’ certified and should not be installed in Republic of Ireland.
SolaX Gen2 Master Box BMS
Storage Systems - Communication Module
Master Box BMS MC0500 Generation 2
Master Box is required for Solax Triple Power HV battery systems.
One BMS can communicate with between 1 and 3 Triple Power batteries on single phase and between 2 and 4 Triple Power batteries on 3phase.
Solax Generation 2 BMS can only be matched with Triple Power Generation 2 batteries. It is NOT compatible with Generation 1 Triple Power batteries, so please don’t mix.
The Eastron SDM230 is a 100A, single phase energy meter with bi-directional energy measurement ideal for Solar PV metering. With a Modbus communication port, the unit allows for remote monitoring and can measure a wide variety of parameters. The blue back-lighted LCD screen for prefect reading makes this device suitable for industrial, residential, and utility applications.
For Solax X1, X1-AC and X1-Fit inverters only.