An affordable Pure Sine Wave inverter from EPSolar/EPEver - the manufacturers of our MPPTs

IPower Plus series is a kind of pure sine wave inverter which can convert. 12/24/48VDC to 220/230VAC(or 110/120VAC). Industrial design, compared with the civil design, has a wider operating temperature, easy installation and operation. The wide input voltage range is ideal for solar system application. The inverter can be applied in many fields, such as household emergency lighting system, vehicle mounted system and small field power supply etc.

Product Highlights

• Safe design with input and output electrical isolation
• Adoption of advanced SPWM technology, pure sine wave output
• Optional output voltage220/230VAC (or 110/120VAC ), setted by DIP switch
• Output frequency 50/60Hz, setted by DIP switch
• LED indicators for working and fault status
• Lower No-load consumption
• Max. efficiency up to 95%
• Input protection: Over voltage protection, low voltage protection
• Output protection: Over load protection, short circuit protection
• Over temperature protection: Temperature-controlled Fan Ventilation; Inverter turns off automatically

If you are doing a DIY installation and you are happy that you will not be exceeding a load of 3000W with this inverter you can use premade 50mm cable with appropriate cable end lugs (the unit takes 10mm cable end lugs), a 250a fuse https://www.bimblesolar.com/index.php?route=product/product&product_id=1899 and holder https://www.bimblesolar.com/index.php?route=product/product&product_id=1897

If you wish to utilitse the peak power on this inverter you must have the facility to use a crimping tool to attach appropriate cable end lugs to 70mm square cable https://www.bimblesolar.com/70mm-cable-meter along with the items below:

Mega fuse holder https://www.bimblesolar.com/index.php?route=product/product&product_id=2032

400a mega fuse https://www.bimblesolar.com/megafuse400a

Isolator https://www.bimblesolar.com/350a-blue-sea-isolator-switch

THIS PRODUCT HAS M10 BOLTS