Boat Solar Thermal hot water heating bundle - flat plate panel, 12v pump - fits to existing water cylinder

Boat Solar Thermal hot water heating bundle - flat plate panel, 12v pump - fits to existing water cylinder
List Price: £1,418.80 +vat
£1,660 (including VAT and 2.5% off for bank or card payment)
Pay Monthly Finance on orders from £700 - £30k
Availability: Delivery Only - Usually 1-2 Weeks
 
ID: 1397

The Marine Solar Water Heating System is designed to use the existing hot water cylinder without affecting the existing method of heating already in use

The 4 way valve is fitted to the cylinder in place of the cold water inlet. The cold-water pipe is fastened back onto the valve. There is a fitted 12 volt pump on the valve and the supplied stainless steel corrugated pipe connects from this to the flat plate collector. The flow from the collector is piped back to the free end of the 4 way valve completing the circuit.

Water is taken from the bottom of the cylinder passed through the collector and returned via the curved pipe to the cylinder.

The whole system is controlled by a 12 volt controller

This system was designed for use on Narrow boats but it will work anywhere that there is an available space, 1 meter by 2 meters, on the roof.

The collector is modified so that it will function whilst lying flat. This makes it non-directional and it will work no matter which way the boat is facing. It does not matter which way your boat is moored (as long as it is not under the shade of a tree) the system will produce hot water.

It will even work on a motorhome depending on the type of cylinder. If you do not have an existing hot water cylinder these can be provided at an extra cost.

The solar water heating system does not affect the way that you are already heating your water. This will still work if required to supplement or increase the amount of hot water produced.

It is just nice to be able to leave the boat moored up for the day and to return to a tank of hot water!!

The kit comprises of

  •  Modified flat plate collector (2m x 1m)

  • 12 volt solar controller

  • 4 way valve ( supply depends on type of system fitted  - no one boat system is the same )

  • 12 volt pump

  • 5 mtrs of twin line stainless steel pre-insulated corrugated pipe ( increased length to be requested on order )

  • Fittings to connect together ( dependent upon info provided by customer.)

  • Filling instruction provided.

    It must be noted that installation requires a competent person with correct tools as some parts will need to be modified to suit. It must be noted this is a basic bespoke kit and further parts may need to be added upon putting together.