Single line Solarlogic pump station with temp gauge, flow meter, pressure gauge, pressure relief, one way valve and filling ports.
Fixing bracket and wall bolts included
10 mtrs twin line DN16 pipe with 13 mm insulation, uv cover and sensor cable
End fittings for pipe (8 off)
18 litre expansion vessel
Wall bracket for expansion vessel
Butyl lead slate for bringing pipes through the roof
Fittings to make up drain for solar circuit
5 mtre roll stainless banding for roof straps
Bag of bolts for roof straps
Our solar water heating kit has been put together from years of experience with installers from all over the country.
It was primarily designed for the DIY market, but has proved to be a hit with the installers who now only need to tell us the size of the cylinder that they want to heat and we do the rest. We supply them with a twin coil cylinder, a collector sized to match the cylinder and all of the equipment to install a working solar water heating system.
All kits come with full written instructions and plenty of photos to help installation
Prices include powder coated extruded aluminium frame, Manifold, clamps, tubes, fittings and heat transfer paste.
These are “Consol UK” Brand of solar thermal collectors. We are able to offer a 10 year guarantee on their equipment. The guarantee is handled by our uk supplier so there would be no delay in getting any problems solved.
The solar collectors use the latest technology and have been tested by SPF in Switzerland The factory has been granted a SOLAR KEYMARK certificate which means that the factory is re-tested each year to make sure that they are maintaining standards. Peace of mind for quality! They use extruded aluminium for the manifold box and for the frame. We have these powder - coated dark brown. This protects the aluminium from corrosion and in our opinion looks better on the roof. (We do not like the cheaper shiny uncoated ones that are available elsewhere). The frame is held together with clamps; these are not the lightweight ones normally used but good heavyweight ones with nut catchers on the underside so that assembly only needs one spanner. The vertical runners can be set at whatever pitch suits so that they will always match up with your roof trusses.
These are the choice of professionals. They are a quality item coming from a factory that we have personal contacts with. You are not buying from a company that has made its name from making boilers or insulation and have no idea where the equipment that they brand as theirs comes from, you are buying from someone who deals in solar water heater, and only solar water heaters!
The irradiation figures in the picture above are a guide. Obviously weather, location, and time of year effects productivity. Even in cold weather the tubes create heat on a clear day. Obviously days in winter are shorter with less light so less time to produce heat. Its UV light that is required so even a cloudy day would produce an amount of heat.
Delivery is by our suppliers own transport and is £65 per kit for mainland England (Scotland and the islands please ask)
Multiple kits to one address £65 for the first and then £30 for each additional kit . Discount available for mixed orders of 10 or more kits/collectors.
All deliveries are made by our suppliers own transport to avoid damage. All vans carry spare tubes and the boxes are opened and checked for breakages when they are delivered. Any broken tubes are replaced before the driver leaves. The drivers schedule allows time for him to run through the installation and give advice on fitting and assembly if required. Please Ask!
Manifold and frame boxed separately. Tubes boxed in 10’s