Fantastic, easy to carry, lightweight, foldable 120W 12V solar panel made with SunPower Cells with support legs

Please Note: This panel does not have a charge controller included, please remember to add a suitable one.  For 1 panel on a 12V Battery you will want a 10A controller.  See related items.

Great for camping, caravans, boats, or anywhere you need easy power.  Great if you don't want to install solar on your caravan or boat, you can just pop this folding panel outside when you are parked up.  You can even connect up multiple ones if you need extra power, or just keep one to use for extra power if you're running low.

Cable with Anderson connector to easily plug in and unplug the panel from the outside when you want to put it away.  Comes with cable to wire to a charge controller and cable from charge controller to batteries.

Great to charge up your laptop, run your sound system or to charge you caravan, boat or car battery.

With stainless steel eyelets you can hang the panel anywhere you like.

Made with High Performance 20% effeciency solar cells giving ultra high effeciency and keeping the panel as small and light as possible.

Much thinner, smaller and lighter than framed solar panels.  

Includes 3.5m cable, fuse, one pair of battery clips.
Folding Size is: 440x560x20(mm)
Net weight is: 2.7kg

27DC115-115Ah -12V

Wet lead acid battery - generally not suitable for mobile applications. Should not be located in living areas.

Since 1926 Crown Battery has responded to the 'power' challenges and individual needs of industry leaders with the best available products and services in the field of heavy-duty commercial deep cycle batteries.

A company wide dedication to quality control and continual improvement has earned Crown Battery the highest quality and service rating in the industry.  "We put more into our deep cycle batteries so you can get more out of them...

More performance, more productivity with less maintenance. Nobody builds them like Crown, because no one else invests in the heaviest, thickest plates in the industry.  Our plates are over 10% thicker than our competitors.

Combine that with our proprietary PROeye and our low maintenance container - features that make battery maintenance predictable and efficient - and you've got a battery that's going to last longer and perform like no other."

• More productivity with less maintenance.
• Thicker and heavier plates, combined with heavy strap and intercell connections is the 'Crown' signature.
• Manufactured to exact standards to deliver the longest run time and battery life.
• More performance.

Crown out-performs the competition in head to head tests over and over again.

"It must be a matter of perspective. But we aren’t prone to exaggeration, the way some of our competitors are.

If you claim to have batteries that out-perform all others, an independent laboratory should confirm the findings.  That’s the way we do it at Crown.  Since 1926, that’s all we’ve done.  And to us, it really isn’t a matter of claiming to be first in the industrial marketplace; but being the best. Some manufacturers are comfortable making exaggerated claims.

We’re comfortable making battery history… one customer at a time."

The Industry Heavyweight

"The heaviest, thickest plates in the industry.  Thicker plates, heavier lead connections, and the most active lead material per ampere hour of rated capacity.  And heavy means more lead, more active material.  Which means more power.  Longer life.  Who would you put your money on?  A lightweight battery? Or the heavyweight of the world.  Crown."

Specifications

Type: Wet lead acid

Product Foot Note Key

Download Datasheet

Victron pure sinewave output, high peak power and high efficiency in a compact unit. Models range from 250VA to 1200VA with UK socket - other socket outlets available on request

These inverters allow you to power domestic equipment - requiring 230VAC - using 'leisure' or 'automotive' batteries rated at 12V

Bulit in DC fuse in all models but not replaceable in all models - see the manual for further details on which models carry the replaceable fuse.

Consider adding a battery isolator switch https://www.bimblesolar.com/300a-blue-sea-battery-isolator

VE.Direct communication port

The VE.Direct port can be connected to:

• A computer (VE.Direct to USB interface cable needed)

• Apple and Android smartphones, tablets, MacBook’s and other devices (VE.Direct Bluetooth Smart dongle needed)

Fully configurable:

• Low battery voltage alarm trip and reset levels

• Low battery voltage cut-off and restart levels

• Dynamic cut-off: load dependent cut-off level

• Output voltage 210 - 245V

• Frequency 50 Hz or 60 Hz

• ECO mode on/off and ECO mode sense level Monitoring:

• In- and output voltage, % load and alarms

Proven reliability

The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature. High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools. ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value (min load: 15W). Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.

Remote on/off

A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector

Spec Sheet

See the Download tab on this listing

New XTRA series - 3rd Generation MPPT

For 12V Solar System: 130W solar panel (60V for max input voltage)
For 24V Solar System: 260W solar panel (60V for max input voltage)

No Fan for silent operation, great for vans, boats or any live in spaces

With built in LCD advanced display and programming screen (XDS2)

New XTRA series has Lithium battery support (set via PC cable only)

​The XTRA tracer models have a current limiting function, you can connect twice the rated power to the controller ​so if your on a budget you can use a smaller controller with more panels so that you get more power in winter or low light but don't risk overloading the controller in the summer.  The output will be limited to the max listed above.

New EPEver (Tracer) series is EPsolar’s third generation of MPPT controller.

XTRA series are advanced maximum power point tracking (MPPT) charge controllers, for off grid photovoltaic systems, with display unit.

In order to maximise the energy harvest from PV arrays and simultaneously minimise the power loss within a wide range of operating conditions, XTRA series apply an advanced smart algorithm which results in up to 30% higher efficient charging, compared to a conventional pulse width modulation (PWM) charge controller. Xtra series controller have limit protection function on charging current &charging power, as well as auto derating power operation at high temperature; the above protection ensure the stability of system even at exceeded rated PV power and over temperature conditions.

Protection class IP32 and isolated RS485 communication port further improve the controller’s reliability under different application requirements. XTRA series controllers incorporate a self-adaptive three-stage charging algorithm based on a digital control circuit, which eeffectively prolongs the lifespan of battery and significantly improve the system performance. It also has extensive electronic protection for overcharge, over discharge, PV&battery reverse polarity and etc. to ensure the sustainability and durability of the o-grid solar system.

Features:

• Advanced MPPT technology & ultra-fast tracking speed is up to 99.5% guaranteed
• Maximum DC/DC transfer efficiency is as high as 98%, full load transfer efficiency is up to 97.4%
• Wide MPP operating voltage range
• Low temperature protection and self activate function for lithium battery charging
• Limit charging power & current over rated range
• Real-time energy statistics function
• Multiple load work modes
• Comprehensive electronic protection
• Compatible with lead acid and lithium-ion¹ batteries
• Over temperature protection and power degrading in higher temperature
• Optional LCD display units (XDB1/XDS1/XDS2) and accessories
• High quality and low failure rate components of ST or IR to ensure service life
• Isolated RS485 communication port with 5V/200mA protected output, with standard Modbus protocol Monitor and set the parameters via APP or PC software
• Dustproof and waterproof design with IP32² protection class
• CE certification(LVD IEC62109,EMC EN3/1-6-61000)

¹ If using Lithium battery, customer should use “PCsoftware” to set the lithium battery parameters
² Ingress of solid objects:Protected against solid objects over 2.5mm
² Ingress of liquids: Protected against falling drops of water, if the case is disposed up to 15 from vertical

Electronic Protections：

• PV short circuit  protection
• PV overvoltage alarm protection
• PV current limiting protection
• PV reverse polarity protection
• Battery overcharge protection
• Battery over discharge protection
• Battery reverse polarity protection
• Load overload protection
• Load short circuit protection
• Overheating protection

Download full spec sheet

Download Manual

6mm² Solar Cable - Price is per meter, simply select the quantity as the number of meters you want.

Double Insulated UV protected solar cable

Max load: 70A in air

Our solar cable is ozone resistant according to BS EN 50396

UV resistant according to HD 605 S2 and is tested for durability according to EN 60216

Flexible tinned copper conductor

Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black

Affordable DC Breaker for 35mm DIN mount.  Use with our DIN Rail as an easy and affordable breaker solution.

Current Flows from top to bottom of the breaker: 
For charge controller wire top pole to charge controller and bottom pole to battery. 
For Inverter wire top pole to battery and bottom pole to inverter.

Affordable DC Breaker for 35mm DIN mount.  Use with our DIN Rail as an easy and affordable breaker solution.

Current Flows from top to bottom of the breaker: 
For charge controller wire top pole to charge controller and bottom pole to battery. 
For Inverter wire top pole to battery and bottom pole to inverter.

Simple DIN mount rail 10cm long for DC or AC DIN mount breakers.  Easy solution, simply screw the rail to the wall of your electrical installation and connect the breakers to it.  Quick easy and simple solution to install breakers to your solar system.

Use with our:

• DC DIN mount breakers
• RCBO AC breakers.