Availability: In Stock - Delivery 1-5 days or collect from Lewes
Bimble Solar 120W Mono Panel
120W power, great for smaller applications and lighting. These are 12V panels so you can use with PWM controllers to make a very cheap system.
Size: 860 x 700 x 25mm
MC4 ended premade solar cables are 60cm long each
Highlights
12V, suitable for charging batteries via PWM or MPPT charge controllers
Monocrystalline
Widely using of the most popular and mature type of modules for off-grid system.
Leading manufacturing technology in PV industry, strictly controlling the quality of raw materials and the process of producing
100% EL inspection, ensures modules are defects free.
Cells binned by current to improve module performance
Anti reflective glass. Not only to increase the light absorption, but also to make the module has the function of self-cleaning in water environment, effectively reducing the power loss caused by dust.
Outstanding performance in low-light irradiance environments.
Excellent mechanical load resistance:Certified to withstand high wind loads(2400pa) and snow loads(5400pa).
High salt and ammonia resistance
Positive power tolerance:0-+5w
Junction Box with cables and MC4 Connectors
Certificates
SGS-TUV Certificate
PID free Testing Certificate
Salt-Mist Testing Certificate
Ammonia-Corrosion Testing Certificate
Fire Testing Certificate
CQC Certificate
IEC61215、IEC61730 Certificate
ISO 9001:2008:Quality managent systems
CE Certificate
Warranty
10 years product warranty
10-years 90% of Min. rated output power,and 25-years 80% of Min. rated output power warranty
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
20A PWM EPever Solar Charge Controller with Dual USB ports and LCD display VS2024AU
The VS-AU controller is a common positive PWM charge controller with built in LCD display and USB port.The multiple load control modes enable it can be widely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.
Product Highlights
Series PWM charging mode
Full power working at working temperature range
Multiple load control modes
Adopt high quality, high-reliability international components brand
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
Ideally 6mm solar cable max - for bigger units with bigger cable click here
Unit best used for housing 1 x AC RCBos, string fuse holders and fuses up to 32a as opposed to DC Din Mount breakers.
Best practice would be to use this unit with no bigger than 6mm square cable and appropriately sized breakers if you are using it with glands for a water tight fit. If you are using it in an environment that is already dry and dust free the use of glands may not be necessary.
This is an empty unit, you must add the breakers you need to your cart as well, see related items tab above to see the breakers that fit.
You will also need suitable cable entry glands - please see related products tab.
Availability: In Stock - Delivery 1-5 days or collect from Lewes
This PV mounting kit fits 30mm frame depth Solar Panels only.
Contains:
4 x 20cm mini rail
4 x 30mm end clamp
No bolts or screws supplied. Suitable bolts or screws are for you to purchase separately, the installer should give their own guidance as to which ones to supply.
We cannot guide you on this, as no one should give you remote advice on how to mount anything, without physically being there to advise appropriately.
Applications can be:
Profile metal roofing where the ridge of each corrugation is flat
Timber frames with appropriate wood screws.
Steel frames using appropriate bolts.
Fibreglass using appropriate nuts & bolts & backing plate.
Canal boat roofs,
DIY ground mount frames,
Shed roofs
Static caravans
Smallholdings
Unlimited panels in a row using the optional middle clamps - click here
- One of these kits for one panel.
- Two panels - two of these kits and one middle clamp kit.
- Three panels - three of these kits and two middle clamp kits
And so on...
Additional rubber strip provides a weather seal against moisture and can help prevent galvanic reaction if mounted on steel. Be sure to seal your bolts or screws after fitting the rail with an appropriate sealant to prevent water ingress.
Do not install on moving vehicles.
These mounts are very basic, if there is any wind loading to consider you are responsible for adding additional mounts to suit your installation.
Bimble Solar are not responsible for your installation and any ramifications as a result of using this product.
Availability: In Stock - Delivery 1-5 days or collect from Lewes
Middle clamps only to be used with the mini mounts - work with both 30mm and 35mm mini mounts
CLICK 'RELATED PRODUCTS' TAB TO SEE THE MINI MOUNTS
Contains:
2 x 20cm mini rail
2 x Middle clamp works with 30mm or 35mm panels
No bolts or screws supplied. Suitable bolts or screws are for you to purchase separately, the installer should give their own guidance as to which ones to supply.
We cannot guide you on this, as no one should give you remote advice on how to mount anything, without physically being there to advise appropriately.
Applications can be:
Profile metal roofing where the ridge of each corrugation is flat
Timber frames with appropriate wood screws.
Steel frames using appropriate bolts.
Fibreglass using appropriate nuts & bolts & backing plate.
Canal boat roofs,
DIY ground mount frames,
Shed roofs
Static caravans
Smallholdings
Unlimited panels in a row using the optional middle clamps - click here
- One of these kits for one panel.
- Two panels - two of these kits and one middle clamp kit.
- Three panels - three of these kits and two middle clamp kits
And so on...
Do not install on moving vehicles.
These mounts are very basic, if there is any wind loading to consider you are responsible for adding additional mounts to suit your installation.
Bimble Solar are not responsible for your installation and any ramifications as a result of using this product.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
Customise This Bundle
You can alter this bundle to suit your needs, simply click the button below to add all the items to your cart separately, you can then edit your cart as you need.
