The Vikram Solar Eldora Micro Series provides you a perfect partner for any small off-grid project.
120W power, great for smaller applications and lighting. These are 12V panels so you can use with PWM controllers to make a very cheap system.
Size: 1319 x 666 x 34 mm
Highlights
Certificates
Factory: ISO 14001:2004, ISO 9001:2008, BS OHSAS 18001:2007
Products: IEC 61215 Ed2, IEC 61730, IEC 62716, MCS, PV Cycle
We have packages for both off grid solar panel systems and on grid Installations. (see other listings)
Get 5% discount for Cash On Collection Payments
As theses are small panels we can use standard couriers for delivery so delivery starts at just £12.50 for the first panel.
Or you can collect for FREE from Near Brighton, East Sussex
For 12V Solar System: 260W solar panel (150V for max input voltage)
For 24V Solar System: 520W solar panel (150V for max input voltage)
No Fan for silent operation, great for vans, boats or any live in spaces
New updated model with better communications and ability to fully program charge voltages via Optional PC cable or Optional MT50 Meter
The BN tracer models have a current limiting function, you can connect twice the rated power to the controller so if your on a budget you can use a smaller controller with more panels so that you get more power in winter or low light but don't risk overloading the controller in the summer. The output will be limited to the max listed above.
New Tracer series is EPsolar’s second generation of MPPT controller. Compared with CLASSIC Tracer series, it has extensive communication ability. And the die-cast aluminum design ensures excellent heat dispersion.
Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 30% and potentially decrease the power of solar array needed.
Features:
·Innovative MPPT technology
·Peak conversion efficiency of 98%
·High tracking efficiency up to 99%
·Several seconds tracking speed
·Die-cast aluminum design and nature cooling
·Temperature compensation
·Diversified load control to meet different requirements
·Four battery type options: Sealed, Gel, Flooded, and USER
·Intelligent lighting and timer control for solar lighting system
·Energy statistics function
·RS485 ports with MODBUS communication protocol
·Optional PC monitoring software and remote meter for real-time monitoring and battery management parameter setting
·Field upgradable firmware
Electronic Protections:
·PV short circuit protection
·PV overvoltage alarm protection
·PV current limiting protection
·PV reverse polarity protection
·Battery overcharge protection
·Battery over discharge protection
·Battery reverse polarity protection
·Load overload protection
·Load short circuit protection
·Overheating protection
Model |
Tracer1215BN |
Tracer2215BN |
Tracer3215BN |
Tracer4215BN |
Nominal system voltage |
12/24V auto work |
|||
Rated battery current |
10A |
20A |
30A |
40A |
Rated load current |
10A |
20A |
20A |
20A |
Max. PV open circuit voltage |
150V |
|||
Max. battery voltage |
32V |
|||
Max. PV input power |
130W (12V) |
260W (12V) |
390W (12V) |
520W (12V) |
260W (24V) |
520W (24V) |
780W (24V) |
1040W (24V) |
|
Equalize charging voltage |
Sealed: 14.6V, Flooded: 14.8V, USER: 9~17V |
|||
Boost charging voltage |
Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V, USER: 9~17V |
|||
Float charging voltage |
Gel /Sealed /Flooded: 13.8V, USER: 9~17V |
|||
Low voltage reconnect voltage |
Gel /Sealed /Flooded: 12.6V, USER: 9~17V |
|||
Low voltage disconnect voltage |
Gel /Sealed /Flooded: 11.1V, USER: 9~17V |
|||
Self-consumption |
≤50mA(12V) ≤27mA(24V) |
|||
Grounding |
Common negative |
|||
Temp. compensation |
-3mV/℃/2V |
|||
Communication Port |
RS485 / RJ45 interface |
|||
Working temperature |
-35℃~+55℃ |
|||
Storage temperature |
-35℃~+80℃ |
|||
Humidity |
≤95% N.C. |
|||
Enclosure |
IP30 |
|||
Overall dimension |
196x118x36mm |
217x143x56mm |
281x160x60mm |
303x183x64mm |
Terminal |
4mm2 |
10mm2 |
16mm2 |
25mm2 |
Net weight |
0.9kg |
1.5kg |
2.3kg |
2.9kg |
Fixes without screwing holes in your roof!
Set of seven black solar panel mounting kit, including 6 brackets (4 courners and 2 sides) and cable gland. They are ideal for fixing our solar panels to any vehicle, caravan, boat, barge or even outbuildings and sheds to provide a strong, secure and aesthetically pleasing fixing method, the mounts will support the solar panel at the correct height above the surface to enable the flow of air underneath the panel and keep it cool, ensuring the solar panel functions at it's optimum. The mounts can be safely bonded to the surface removing the need to drill holes. The panel is secured by screwing or bolting it to the mounting corner, but the corner itself can be fixed with a good strong adhesive like 'Sikaflex' or 'CT1' or any polyurethane sealant to the roof. (Ensure the roof is clean and dry before attaching. If a painted roof ensure the paint is not flakey)
We sell CT1 which is great for sticking these down, please see related products tab for different colours avaialble.
If you are fitting to a vehicle we recommend that you additionally bolt or screw the panel and mounting down as well.
Optional Meter for AN BN & CN Tracer MPPT charge controllers (10A, 20A, 30A or 40A) for CN controllers need specialist cable cable available on our site
PLEASE NOTE - YOU CANNOT USE THE MT50 AT THE SAME TIME AS THE BLUETOOTH / WIFI OPTIONAL ADAPTORS
Features:
·Automatic identify the controller, and display the type, model and relevant parameter data
·Large-screen multifunction LCD displays all the operational data and system working status in digital, graphic and textual forms
·With six navigation function keys, the operation is direct, convenient and rapid
·Real-time energy statistics recording
·Both data and data flowing on the same lead ,no need for external power
·Real-time monitoring and acoustic alarm of failure information of the controller
·Longer communication distance based on RS485
Functions Via MT50
·Diversified load control modes : manual, light ON/OFF, Light ON+ Timer, Time Control
·Battery type selection: Gel, sealed, flooded and USER type
·Real-time monitor
·Programmable parameters
·Energy display function
Download Guide to change language
Self-consumption |
Backlight and acoustic alarm on<65mA Backlight on<23mA Backlight off <15mA |
Faceplate dimensions |
98×98 mm / 3.86×3.86 in |
Frame dimensions |
114×114 mm / 4.49×4.49 in |
Connector type |
RJ45 |
Meter cable |
Standard 2m, max .50m |
Meter weight |
0.190 Kg |
Ambient Temperature |
-20℃~+70℃/-4℉~158℉ |
6mm Solar Cable - Price is per meter simply select the quantity as the number of meters you want.
Double Insulated UV protected solar cable
Max load: 50A
For use with our stick down panels and ABS mounting kits - also great for sealing cable holes
CT1 will successfully bond:
Unique adhesion on virtually any material in most applications without the need for additional fixings. CT1 is the ultimate solution for sealing.
Excellent resistance to chemicals
Application
Apply with a standard cartridge caulking gun or pneumatic version at approximately 6 bar (108psi)
Drying Time
Skin cure 23ºC 50% R.H. 8 minutes
Non-adhering 23ºC 50% R. 25minutes
Full cure time 23ºC 50% R.H. 24hrs - 6mm (48hrs - 7/12mm)
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
Cable Gland Entry Box, use to connect through external surface. Perfect for solar panel cables coming from outside to controller.
Simple DIN mount rail 10cm long for DC or AC DIN mount breakers. Easy solution, simply screw the rail to the wall of your electrical installation and connect the breakers to it. Quick easy and simple solution to install breakers to your solar system.
Use with our: