The Pylontech 12V Series are all-purpose lithium battery modules, With cutting edge LiFePO (Lithium iron Phosphate) cells, embedded BMS (Battery Management System) and mechanical design, the Pylontech RT12V Series product provides inherent safety, extremely high reliability and zero maintenance. Compared with the same capacity lead-acid based batteries, it has more than twice the usable capacity, more than 3 times the life cycle, but only about 40% of the weight. It is a perfect replacement to lead acid based batteries in applications such as marine, RV, golf carts and solar storage. RT12V Series products will bring you the perfect experience in different applications.

Although these batteries have the possibility to communicate over CANbus with various top brands, that communication is not required for the batteries to work - they are suitable as a direct lead-acid replacement, as long as your existing set-up can be adjusted to correct charging voltages etc.

These batteries can be connected in both series and parallel (4S an 4P respectively) to increase system voltage, total capacity, or both.

• A 12V System (1S) can be scaled up to 16 in parallel

• A 24V system (2S) up to 8 in parallel

• A 36V system (3S) up to 5 in parallel

• A 48V system (4S) up to 4 in parallel

*For systems of 1-8 batteries, the maximum continuous discharge is 1.0C, for system of 9 batteries or more, the maximum continuous discharge is 0.8C.

They are also internally heated to withstand colder temperatures.

For comms with Victron GX devices, the Type B cable is required.

The Pylontech Auto App is available for Android and iOS(new updste) and is required to program the Master Battery in any series and parallel configuration where the total system information is to be reported or exported to other devices.

GREAT YOUTUBE VIDEO EXPLAINER CLICK HERE

Here is the link to register your batteries and receive extended warranty:

https://en.pylontech.com.cn/service/support/

Victron Smart Solar 50A MPPT Solar Charge Controller with max VOC 100V, 12 or 24 Volt battery

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

MPPT: Ultra Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

Remote Monitoring and Control
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.

Ideally 6mm solar cable max - for bigger units with bigger cable click here

Unit best used for housing 1 x AC RCBos, string fuse holders and fuses up to 32a as opposed to DC Din Mount breakers.

Best practice would be to use this unit with no bigger than 6mm square cable and appropriately sized breakers if you are using it with glands for a water tight fit.  If you are using it in an environment that is already dry and dust free the use of glands may not be necessary.

This is an empty unit, you must add the breakers you need to your cart as well, see related items tab above to see the breakers that fit.  

You will also need suitable cable entry glands - please see related products tab.

Affordable DC Breaker for 35mm DIN mount.  Use with our DIN Rail as an easy and affordable breaker solution.

Current Flows from top to bottom of the breaker: 
For charge controller wire top pole to charge controller and bottom pole to battery. 
For Inverter wire top pole to battery and bottom pole to inverter.

Affordable DC Breaker for 35mm DIN mount.  Use with our DIN Rail as an easy and affordable breaker solution.

Current Flows from top to bottom of the breaker: 
For charge controller wire top pole to charge controller and bottom pole to battery. 
For Inverter wire top pole to battery and bottom pole to inverter.

A small, low cost multimeter supplied with test leads and holster.

• 3½ digit, 1999 count display
• AC/DC voltage measurement
• DC current
• Resistance measurement (20R to 2MR)
• Diode, continuity and transistor tester
• Square wave output
• Low battery indication
• Requires a 9V PP3 battery (included)

DMM Functions: DC Current, AC/DC Voltage, Continuity, Diode, Resistance, Transistor
No. of Digits: 3.5  
DMM Response Type: Average  
Display Count: 1999  
Range Selection: Manual  
Voltage Measure DC Max: 500V  
Voltage Measure AC Max: 500V  
Current Measure DC Max: 5A  
Resistance Measure Max: 2Mohm