Made with Sunpower E20 super high effeciency cells, and designed to be stuck down, these are great for vans, campers and boats. They are light weight at just 3.1Kg each and you can just stick to your roof even if curved with CT1 which we have here.
We can ship this panels worldwide. As they are not glass panels, so we can ship with standard couriers at affordable rates.
Solar cell: Sunpower E20 A grade Cells
Cells size (mm):125x125
Cells per module: 4 x 11
Module size (mm): 1460 x 540 x 3mm
Power tolerance: +/-3%
Nominal peak power(WP): 150
Nominal voltage(V): 25.52
Nominal current (A): 5.97
Open circuit voltage (Voc): 30.11
Short cirsuit current(Isc): 6.32
Cell Conversion efficiency: 22.60%
Operating temperature: -40 to+85°C
Max system voltage: 100V DC
Net Weight(kg): 3.1kg
Junction box with 900mm cable and MC4 connectors
Note:Junction box at the front of the panel
Manufacturers Warranty: 1 year repair/replacement of panel materials.
Please note: These panels are not designed to be walked on.
As theses are non-glass panels we can use standard couriers for delivery so delivery is available worldwide.
Since 1926 Crown Battery has responded to the 'power' challenges and individual needs of industry leaders with the best available products and services in the field of heavy-duty commercial deep cycle batteries.
A company-wide dedication to quality control and continual improvement has earned Crown Battery the highest quality and service rating in the industry. We put more into our deep cycle batteries so you can get more out of them...
More performance, More Productivity with Less Maintenance. Nobody builds them like Crown, because no one else invests in the heaviest, thickest plates in the industry. Ours are over 10% thicker than our competitors.
Combine that with our proprietary PROeye and our low maintenance container - features that make battery maintenance predictable and efficient - and you've got a battery that's going to last longer and perform like no other.
Crown out-performs the competition in head to head tests over and over again.
It must be a matter of perspective. But we aren’t prone to exaggeration, the way some of our competitors are.
If you claim to have batteries that out-perform all others, an independent laboratory should confirm the findings. That’s the way we do it at Crown. Since 1926, that’s all we’ve done. And to us, it really isn’t a matter of claiming to be first in the industrial marketplace. But being the best. Some manufacturers are comfortable making exaggerated claims.
We’re comfortable making battery history… one customer at a time.
The heaviest, thickest plates in the industry. Thicker plates, heavier lead connections, and the most active lead material per ampere hour of rated capacity. And heavy means more lead, more active material. Which means more power. Longer life. Who would you put your money on? A lightweight battery? Or the heavyweight of the world. Crown.
|A =||Automotive / SAE Top Terminal|
|D =||Standard Terminal (Dualo Automotive / Stainless Threaded Terminal)|
|F =||Commercial Threaded Stud Terminal|
|G =||Refer to Terminal Requirement Whn ordering Type A|
|I =||Cover with Raised Vent|
|J =||Battery Fitted with Handle or Lifting Lug|
|K =||PRO eye Fluid Indicator (Option for Gr 24/27/31)|
|L =||Antimony Alloy Construction: Low Maintenance Service|
New XTRA series - 3rd Generation MPPT
For 12V Solar System: 260W solar panel (100V for max input voltage)
For 24V Solar System: 520W solar panel (100V for max input voltage)
No Fan for silent operation, great for vans, boats or any live in spaces
With built in LCD advanced display and programming screen (XDS2)
New XTRA series has Lithium battery support (set via PC cable only)
The XTRA tracer models have a current limiting function, you can connect twice the rated power to the controller so if your on a budget you can use a smaller controller with more panels so that you get more power in winter or low light but don't risk overloading the controller in the summer. The output will be limited to the max listed above.
New EPEver (Tracer) series is EPsolar’s third generation of MPPT controller.
XTRA series are advanced maximum power point tracking (MPPT) charge controllers, for off grid photovoltaic systems, with display unit.
In order to maximise the energy harvest from PV arrays and simultaneously minimise the power loss within a wide range of operating conditions, XTRA series apply an advanced smart algorithm which results in up to 30% higher efficient charging, compared to a conventional pulse width modulation (PWM) charge controller. Xtra series controller have limit protection function on charging current &charging power, as well as auto derating power operation at high temperature; the above protection ensure the stability of system even at exceeded rated PV power and over temperature conditions.
Protection class IP32 and isolated RS485 communication port further improve the controller’s reliability under different application requirements. XTRA series controllers incorporate a self-adaptive three-stage charging algorithm based on a digital control circuit, which eeffectively prolongs the lifespan of battery and significantly improve the system performance. It also has extensive electronic protection for overcharge, over discharge, PV&battery reverse polarity and etc. to ensure the sustainability and durability of the o-grid solar system.
¹ If using Lithium battery, customer should use “PCsoftware” to set the lithium battery parameters
² Ingress of solid objects:Protected against solid objects over 2.5mm
² Ingress of liquids: Protected against falling drops of water, if the case is disposed up to 15 from vertical
Optional Meter for AN, BN, CN, XTRA MPPT charge controllers. DuoRacer requires the MT11, see separate listings.
Comes with 3m RJ45 cable in the box, if you need longer we have a 5m cable here 5m RJ45 Cable for MT50
PLEASE NOTE - YOU CANNOT USE THE MT50 AT THE SAME TIME AS THE BLUETOOTH / WIFI OPTIONAL ADAPTORS
·Automatic identify the controller, and display the type, model and relevant parameter data
·Large-screen multifunction LCD displays all the operational data and system working status in digital, graphic and textual forms
·With six navigation function keys, the operation is direct, convenient and rapid
·Real-time energy statistics recording
·Both data and data flowing on the same lead ,no need for external power
·Real-time monitoring and acoustic alarm of failure information of the controller
·Longer communication distance based on RS485
Functions Via MT50
·Diversified load control modes : manual, light ON/OFF, Light ON+ Timer, Time Control
·Battery type selection: Gel, sealed, flooded and USER type
·Energy display function
Backlight and acoustic alarm on<65mA
Backlight off <15mA
98×98 mm / 3.86×3.86 in
114×114 mm / 4.49×4.49 in
Standard 2m, max .50m
Please note: Older MT50s manufacturered before August 2017 are not compatible with the newer XTRA and AN controllers.
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 50A
Contacts: Copper.Tin plated
Degree of protection: IP67
Flame class: UL94-V0
Wire size range: 6mm2
For use with our stick down panels and ABS mounting kits - also great for sealing cable holes
CT1 will successfully bond:
Unique adhesion on virtually any material in most applications without the need for additional fixings. CT1 is the ultimate solution for sealing.
Excellent resistance to chemicals
Apply with a standard cartridge caulking gun or pneumatic version at approximately 6 bar (108psi)
Skin cure 23ºC 50% R.H. 8 minutes
Non-adhering 23ºC 50% R. 25minutes
Full cure time 23ºC 50% R.H. 24hrs - 6mm (48hrs - 7/12mm)
Cable Gland Entry Box, use to connect through external surface. Perfect for solar panel cables coming from outside to controller.
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
A small, low cost multimeter supplied with test leads, perfect to help you setup and test your solar installation.
DMM Functions: DC Current, AC/DC Voltage, Diode, Resistance
No. of Digits: 3.5
DMM Response Type: Average
Display Count: 1999
Range Selection: Manual
Voltage Measure DC Max: 500V
Voltage Measure AC Max: 500V
Current Measure DC Max: 5A
Resistance Measure Max: 2Mohm
Simple DIN mount rail 10cm long for DC or AC DIN mount breakers. Easy solution, simply screw the rail to the wall of your electrical installation and connect the breakers to it. Quick easy and simple solution to install breakers to your solar system.
Use with our: