Great for small spaces or if you need to fit panels in around roof lights etc. Also great for keeping your starter battery topped up.
Made with Sunpower E20 super high efficiency cells, and designed to be stuck down, these are great for vans, campers and boats. They are light weight at just 0.6Kg each and you can just stick to your roof even if curved with CT1 which we have here.
We can ship these panels worldwide. As they are not glass panels, so we can ship with standard couriers at affordable rates.
Specification
Solar cell: Sunpower E20 A grade Cells
Cells size (mm):125x24.5
Cells per module: 2 x 16
Module size (mm): 455 x 285 x 3mm
Power tolerance: +/-3%
Nominal peak power(WP): 20
Nominal voltage(V): 19.8
Nominal current (A): 0.97
Open circuit voltage (Voc): 23.40
Short circuit current(Isc): 1.03
Cell Conversion efficiency: 23.70%
Operating temperature: -40 to+85°C
Max system voltage: 45V DC
ETFE Surface
Net Weight(kg): 0.6kg
Certification: CE,ROHS
Junction box with 900mm cable and MC4 connectors
Note:Junction box at the front of the panel
Manufacturers Warranty: 1 year
Please note: These panels are not designed to be walked on.
Delivery
As theses are non-glass panels we can use standard couriers for delivery so delivery is cheap!
Charge both your starter battery and leisure battery at once from 1 solar panel. Made by EPsolar who make our popular Tracer MPPTs.
Please note, if running a long cable to one of your batteries please ensure you use a thick enough cable. Please use this volt drop caclulator to see your losses on the cable you plan to use.
·Two battery charging eliminates the extra cost of two separate solar charging system
·Intelligent System Optimum Control
·12/24V auto work
·Battery type selection
·Charging frequency optional
·High efficient Series PWM charging
·Local external temperature compensation
·Remote temperature sensor optional
·Use MOSFET as electronic switch, without any mechanical switch
·Remote meter MT-1 optional
·Electronic protection: over charging, short circuit, battery reverse polarity protection
Electrical parameters |
|
System voltage |
12 / 24VDC Auto work |
Nominal battery current |
10A,20A |
Charge circuit voltage drop |
≤0.26V |
Discharge circuit voltage drop |
≤0.15V |
Self consumption |
≤6mA |
Working temperature |
-35℃ to +55℃ |
Humidity |
10%-90% NC |
Enclosure |
IP30 |
Terminal |
4mm2 |
Net weight |
0.24kg |
Battery voltage parameters (temperature at 25°C) |
|||
Battery charging setting |
Sealed |
Flooded |
Gel |
Equalize charging voltage |
14.4 V;x2/24V |
14.6V;x2/24V |
14.8V;x2/24V |
Boost charging voltage |
14.2V;x2/24V |
14.4V;x2/24V |
14.6V;x2/24V |
Float charging voltage |
13.7V;x2/24V |
13.7V;x2/24V |
13.7V;x2/24V |
Max. solar voltage |
30V(12V system),55V(24V system) |
||
Battery voltage range |
8-15V(12V system),8-30V(24V system) |
||
Self-consumption |
4mA at night, 10mA at charging |
||
Meterbus connection |
8-pin RJ-45 |
||
Temp. compensation |
-5mv/℃/2V |
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black
Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link
Wire size range: 6mm2
For use with our stick down panels and ABS mounting kits - also great for sealing cable holes
CT1 will successfully bond:
Unique adhesion on virtually any material in most applications without the need for additional fixings. CT1 is the ultimate solution for sealing.
Excellent resistance to chemicals
Application
Apply with a standard cartridge caulking gun or pneumatic version at approximately 6 bar (108psi)
Drying Time
Skin cure 23ºC 50% R.H. 8 minutes
Non-adhering 23ºC 50% R. 25minutes
Full cure time 23ºC 50% R.H. 24hrs - 6mm (48hrs - 7/12mm)