Great for small spaces or if you need to fit panels in around roof lights etc.  Also great for keeping your starter battery topped up. 

Made with Sunpower E20 super high effeciency cells, and designed to be stuck down, these are great for vans, campers and boats.  They are light weight at just 0.6Kg each and you can just stick to your roof even if curved with CT1 which we have here.

We can ship this panels worldwide.  As they are not glass panels, so we can ship with standard couriers at affordable rates.

Specification

Solar cell: Sunpower E20 A grade Cells
Cells size (mm):125x24.5
Cells per module: 2 x 16
Module size (mm): 490 x 285 x 3mm
Power tolerance: +/-3%
Nominal peak power(WP): 20
Nominal voltage(V): 19.8
Nominal current (A): 0.97
Open circuit voltage (Voc): 23.40
Short cirsuit current(Isc): 1.03
Cell Conversion efficiency: 23.70%
Operating temperature: -40 to+85°C
Max system voltage: 45V DC
Net Weight(kg): 0.6kg
Certification: CE,ROHS

Junction box with 900mm cable and MC4 connectors
Note:Junction box at the front of the panel

Manufacturers Warranty: Guarantee that Power output will be at least 95% after 8 years and more than 85% after 10 years, 2 years repair/replacement.

Please note: These panels are not designed to be walked on.

Delivery

As theses are non-glass panels we can use standard couriers for delivery so delivery starts at just £3.00 for the first panel.

Landstar Waterproof 10A PWM controller - works with Tracer MT50 meter

New LandStar series is Epsolar’s new generation programmable solar charge controller. Fully encapsulated PCB, IP67 design, aluminum case ensures the  controller can work in extremely terrible, and increase system operation, reliability and efficiency.

Features:

·12V/24V automatic identify or user-defined working voltage.
·High efficient Series PWM charging, increase the battery lifetime and improve the solar system performance.
·Use MOSFET as electronic switch, without any mechanical switch.
·Multiple load control modes, increase the flexibility of the load output
·Gel, Sealed, Flooded and user-defined battery type option.
·New SOC method of calculating accurately displays the available battery capacity.
·LandStar BP has no keys , The control function and the switch condition of the load can be modified by communication connection.
·Use of standard Modbus communication protocol for TTL-232 bus connections, communication protocol compatibility much better
·Support firmware upgrade
·Fully encapsulated PCB, IP67 protection
·Aluminumhousing

Download full spec sheet

More powerful function via MT50 or PC
·Diversified load control modes : Manual, Light ON/OFF, Light ON+ Timer, Time Control 
·Battery type selection: Gel, sealed, flooded and User type
·Real-time monitor 
·Programmable parameters 
·LVD  or SOC load disconnect function
·Energy statistics function

Electronic Protections：
·PV array short circuit 
·Over discharging 
·Over charging 
·Load overload 
·Load short circuit 
·PV reverse polarity 
·Battery reverse polarity
·Overheating

For use with our stick down panels and ABS mounting kits - also great for sealing cable holes

CT1 will successfully bond:

• Metals (including lead)
• Glass
• Mirrors
• Wood
• Polystyrene

Unique adhesion on virtually any material in most applications without the need for additional fixings. CT1 is the ultimate solution for sealing.
Excellent resistance to chemicals

• Prevents fungal growth
• UV resistant
• Excellent resistance to vibration
• Food safe - conforms to ISEGA Standards
• Works in wet or dry conditions
• Perfect for marine and boating maintenance, accident and emergency repairs
• Can be used in all salt-water environments
• Odourless
• Does not shrink
• Can be painted
• Contains no solvents
• No isocyanates
• Unique flexibility
• Environmentally compliant
• Instant repair and bonding with fibre glass and carbon fibre materials

Application
Apply with a standard cartridge caulking gun or pneumatic version at approximately 6 bar (108psi)

Drying Time
Skin cure 23ºC 50% R.H. 8 minutes
Non-adhering 23ºC 50% R. 25minutes
Full cure time 23ºC 50% R.H. 24hrs - 6mm (48hrs - 7/12mm)

Premade 6mm Solar Cable with MC4 connectors, quick and easy to install.

(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 2.5m lengths MC4 to bare wire)

Double Insulated UV protected solar cable

Max load: 50A

Housing: PPO
Contact resistance:5mΩ
Contacts: Copper.Tin plated 
Degree of protection: IP67 
Flame class: UL94-V0
Pin dimensions:Ø4mm 
Wire size range: 6mm2

These little connectors are fantastic, they make wiring so easy, simply put the wires together and then twist the connector over the bare ends.  Works for upto 6mm cables to join 2 x 6mm cables together.

Swept-wing design for comfort
Live-action, square-wire spring
Hexagonal shape for standard nutdriver
No pre-twisting required and is fully re-useable
Accept solid, stranded and flexible wires
UL Listed and CSA Certified
Shell rated for 105°C
Flame-retardant shell
Rated at 41A/600V
Wire combination: 0.5mm² to 6.0mm², Min. 3x0.5mm², Max. 2x6.0mm²