Our LiFePO4 batteries are made to order so we can make any size you require with custom BMS to suit your application. If you require a specific BMS then please let us know details of your peak and continuous loads when ordering. These banks are made up from 3.2V LiFePO4 cells. If you require just cells on their own for a project we can provide them as well.
|Rated capacity||100Ah @0.3 C3A20°C|
|Peak current||100A for 30S|
Battery Type: 3.2V single LiFePo4 Battery, LIFEPO4 Battery Bank;
Voltage: 3.2V, 12V, 24V, 36V, 48V, 72V, 96V, 144V, 256V, 320V;
Capacity: 100Ah to 500Ah;
Higher operating voltage of 3.2V and energy density:
Lithium lron Phosphate battery delivers and maintains a stable operating voltage of over 3.2V until final discharge— three times as much voltage as a Ni-Cd or Ni-Mh battery provides.it takes just 1/3 the number of lithium ion batteries to provide the equivalent amount of voltage form Ni-Cd or Ni-MH batteries, so portable devices can be made much smaller and ligher.
Higher discharge rate for more powerful devices:
Lithium lron Phosphate batteries are capable of outstanding rates of discharge(up to 20C rate or more)sufficient to power a hobby planes and helicopters, a power tool’s motor and other devices.
Stable discharge under various temperatures conditions:
Lithium lron Phosphate batteries provide stable discharge within a wide range of temperatures, form -40°C to 80°C.
Superior storage characteristics including minimal self-discharge:
Lithium lron Phosphate batteries limit self-discharge to less than 5% of the original capacity per month when batteries are stored at 20°C.
Long Cycle Life:
Lithium lron Phosphate batteries last over 2000 repeated charges and discharges, as well as offering outstanding economy.
No Memory Effect:
Lithium lron Phosphate batteries has no memory effect, seen in Ni-Cd,NI-MH, causes charging capacity to be reduced by repeated charing and discharging to in sufficient levels.
Greater resistance to overcharging. High thermal stability, never explode, never getting fire
100% Green battery for the environment,
Smallest Size, Lightest Weight
Highly efficient module giving 345W from a panel physically the same size as a 250W, great if you have limited space.
Better in low light than standard panels
LG NeON™2 345Wp solar PV module with black frame, features high efficiency 60 x LG NeON™ 2 monocrystalline cells. The LG NeON™ 2 has been designed to significantly enhance its output efficiency making it efficient even on limited roof areas.
LG NeON™ 2 has an enhanced performance warranty. The annual degradation has fallen from -0.7%/yr to -0.6%/yr. Even after 25 years, the cell guarantees 2.4%p more output than the previous NeON™modules.
The LG NeON™ 2 has been designed with aesthetics in mind; thinner wires that appear all black at a distance. LG NeON™ 2 now performs better on sunny days thanks to its improved temperature co-efficiency.
With its newly reinforced frame design, LG has extended the warranty of the NeON™ 2 for an additional 2 years. Additionally, LG NeON™2 can endure a front load up to 6000 Pa, and a rear load up to 5400 Pa.
Module dimensions: 1686 x 1016 x 40mm
Download Brochure to see how effecient and great in low light these panels are
This listing is for 1 panel, simply select how many you need in the quantity. There is NO MINIMIUM Order.
Delivery from £24+vat
First panel £24+vat, each additional panel just £6+vat delivery
ie: 3 panels costs £36+vat delivery.
Delivery service is an economy service that hand delivers fragile items on a weekly round across the UK.
Surcharge for remote areas including parts of Wales, Scotland, Ireland and Isle of Wight, please see Delivery info
This is a safer more reliable and cheaper way for you to receive panels and saves on the huge amounts of wasted packing materials.
Pallet Shipping 25 panels per pallet:
£175 UK Mainland
£375 Rest of Europe
Or you can collect for FREE from Nr Brighton.
Pure sinewave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds. Models range from 150VA to 3000VA per module.
VE.Direct allows use with VE.Direct Bluetooth adaptor to control the inverter via your phone or laptop.
For 12V Solar System: 390W solar panel (100VOC for max input voltage (92V at 25C))
For 24V Solar System: 780W solar panel (100VOC for max input voltage (92V at 25C))
IP67 Waterproof model made by Tracer with their same great MPPT functionality. With 100VOC input you can run most panels as a maximum of 2 in series. Fully program charge voltages via Optional PC cable or MT50 with special lead.
Set as default for 12V LiFePO4 batteries, can only re-program Lithium Battery Options with PC Cable and PC software. Can use MT50/bluetooth/wifi along with the special BP lead to set Flooded or Sealed batteries and settings.
No Fan for silent operation, great for vans, boats or any live in spaces
Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 30% and potentially decrease the power of solar array needed.
·Adopt high quality components of ST,IR and Infineon, make sure product using lifespan
·Wide working environment temperature(-40℃～60℃)
·Apply to lithium battery(LiFePO4/Li-NiCoMn)and battery(Sealed/Gel/Flooded)
·Lithium battery self-activating and low temperature protection function
·Maximum conversion efficiency of 98%
·Advanced Maximum Power Point Tracking (MPPT) technology, with tracking efficiency no less than 99%
·Ultra-fast tracking speed and guaranteed tracking efficiency
·Accurately recognizing and tracking of multiple power points
·PV power limitation function
·Monitoring and setting parameter via Mobile APP, PC Monitor setting software with RS485 communication interface.
·Use of standard Modbus communication protocol for RS485 bus connections, communication protocol compatibility much better
·Connecting the IOT(Internet of Things) module and Cloud Server monitoring software to realize remote monitoring of the multi-machine system
·The RS485 connector can provide power supply
·Aluminum housing for better cooling
·Real-time energy statistics function
·IP67 waterproof degree
·Long lifespan design，five years warranty
Load working mode:
·Light ON + Timer
·Intelligent Power Mode
·PV over current protection
·PV short circuit protection
·PV reverse polarity protection
·Battery reverse polarity protection
·Battery over voltage protection
·Battery over discharge protection
·Battery overheating protection
·Lithium battery low temperature protection
·Load overload protection
·Load Short circuit protection
Fixes without screwing holes in your roof!
Set of seven black solar panel mounting kit, including 6 brackets (4 courners and 2 sides) and cable gland. They are ideal for fixing our solar panels to any vehicle, caravan, boat, barge or even outbuildings and sheds to provide a strong, secure and aesthetically pleasing fixing method, the mounts will support the solar panel at the correct height above the surface to enable the flow of air underneath the panel and keep it cool, ensuring the solar panel functions at it's optimum. The mounts can be safely bonded to the surface removing the need to drill holes. The panel is secured by screwing or bolting it to the mounting corner, but the corner itself can be fixed with a good strong adhesive like 'Sikaflex' or 'CT1' or any polyurethane sealant to the roof. (Ensure the roof is clean and dry before attaching. If a painted roof ensure the paint is not flakey)
ABS mounts raise the panel by 25mm. Edge of panel to edge of ABS is 55mm.
We sell CT1 which is great for sticking these down, please see related products tab for different colours avaialble.
If you are fitting to a vehicle we recommend that you additionally bolt or screw the panel and mounting down as well, as the strength of these systems is only as strong as the roof type or paint on your roof!
Here is a good tutorial to get you started:
Optional Meter for AN BN & CN Tracer MPPT charge controllers (10A, 20A, 30A or 40A) for CN controllers need specialist cable cable available on our site
PLEASE NOTE - YOU CANNOT USE THE MT50 AT THE SAME TIME AS THE BLUETOOTH / WIFI OPTIONAL ADAPTORS
·Automatic identify the controller, and display the type, model and relevant parameter data
·Large-screen multifunction LCD displays all the operational data and system working status in digital, graphic and textual forms
·With six navigation function keys, the operation is direct, convenient and rapid
·Real-time energy statistics recording
·Both data and data flowing on the same lead ,no need for external power
·Real-time monitoring and acoustic alarm of failure information of the controller
·Longer communication distance based on RS485
Functions Via MT50
·Diversified load control modes : manual, light ON/OFF, Light ON+ Timer, Time Control
·Battery type selection: Gel, sealed, flooded and USER type
·Energy display function
Backlight and acoustic alarm on<65mA
Backlight off <15mA
98×98 mm / 3.86×3.86 in
114×114 mm / 4.49×4.49 in
Standard 2m, max .50m
Please note: Older MT50s manufacturered before August 2017 are not compatible with the newer XTRA and AN controllers.
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 50A
Contacts: Copper.Tin plated
Degree of protection: IP67
Flame class: UL94-V0
Wire size range: 6mm2
6mm Solar Cable - Price is per meter simply select the quantity as the number of meters you want.
Double Insulated UV protected solar cable
Max load: 50A
4 Way unit can hold our Tomzn DC and AC breakers
Unit can hold the following options:
This is an empty unit, you must add the breakers you need to your cart as well, see related items tab above to see the breakers that fit.
For use with our stick down panels and ABS mounting kits - also great for sealing cable holes
CT1 will successfully bond:
Unique adhesion on virtually any material in most applications without the need for additional fixings. CT1 is the ultimate solution for sealing.
Excellent resistance to chemicals
Apply with a standard cartridge caulking gun or pneumatic version at approximately 6 bar (108psi)
Skin cure 23ºC 50% R.H. 8 minutes
Non-adhering 23ºC 50% R. 25minutes
Full cure time 23ºC 50% R.H. 24hrs - 6mm (48hrs - 7/12mm)
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
This cable is used to connect the Waterproof Tracer BP & Landstar waterproof controllers to the MT50 meter.
MT50 Communication Cable
These little connectors are fantastic, they make wiring so easy, simply put the wires together and then twist the connector over the bare ends. Works for upto 6mm cables to join 2 x 6mm cables together.
Swept-wing design for comfort
Live-action, square-wire spring
Hexagonal shape for standard nutdriver
No pre-twisting required and is fully re-useable
Accept solid, stranded and flexible wires
UL Listed and CSA Certified
Shell rated for 105°C
Rated at 41A/600V
Wire combination: 0.5mm² to 6.0mm², Min. 3x0.5mm², Max. 2x6.0mm²
Ratings & Wire Size Combinations