Alpha & OutBack Energy’s SPC III is third generation off-grid inverter with rich new functions. Its detachable LCD control module can be turned to remote panel. It’s also integrated with Bluetooth interface ready for mobile monitoring and supports USB on-the-go function to facilitate data upload/ download. Battery independency design enhances this inverter to operate without battery connected.
Note: This unit requires a minium of 5 Solar Panels in series to function (we advise 6-8 depeding on panel)
|SPC III Off-Grid Inverter Models|
|Model||SPC III 1500-24||SPC III 3000-24||SPC III 5000-48|
|Selectable Voltage Range||90-280VAC|
|Frequency Range||50/60Hz (autosensing)|
|AC Voltage Regulation (Batt. Mode)||230VAC ± 5%|
|Efficiency (Peak)||90 - 93%|
|Transfer Time||15 ms|
|Waveform||Pure Sine Wave|
|Floating Charge Voltage||27VDC||54VDC|
|Custom Voltage Range||25-31.5VDC||48-61VDC|
|SOLAR CHARGER & AC CHARGER|
|Solar Charger Type||MPPT|
|Maximum PV Array Power||2000W||4000W|
|MPP Range @ Operating Voltage||120 - 380 VDC||120 - 450 VDC|
|Maximum PV Array Open
|400 VDC||500 VDC|
|Maximum Solar Charge Current||60A||80A|
|Maximum AC Charge Current||40A||60A|
|Maximum Charge Current||60A||80A|
|Dimension (D x W x H) mm||100 x 280 x 390||115 x 300 x 400|
|Net weight kg||8,5||9||10|
|Communication Interface||USB / RS232 / RS485 / Bluetooth / Dry Contact|
|Humidity||5% to 95% Relative Humidity (Non-condensing)|
|Operating Temperature||-10°C to 50°C|
|Storage Temperature||- 15°C to 60°C|
Warranty: 2 years
Note: These are a high frequency type inverter unlike the low frequency outback VFXR range.
275W JA Solar Panels
Bargain Price - MCS Approved
Silver frame poly JAP60S01 260-280 1000V Cypress Series
MULTICRYSTALLINE SILICON SOLAR MODULE
This listing is for 1 panel, simply select how many you need in the quantity. There is NO MINIMIUM Order.
6v Platinum battery PLA-T105, 225ah
Manufactured by Platinum, as an afordable model of the Trojan T105
Consumer and trade recognised brand
6 Volt (220ah @ 20hr rate - 180ah @ 5hr rate)
26 kg - 264mm length x 181mm wide x 276mm high
Terminals available as M8 stud LPT
|Capacity (C5)||185 Ah|
|Capacity (C10)||207 Ah|
|Capacity (C20)||225 Ah|
|Capacity (C100)||250 Ah|
This product has Cheaper Delivery to Business addresses.
35mm Cable - Use for connecting Batteries to Inverter
You will need 2 cables, 1 for Positive and 1 for Negative
If you need a longer cable please let us know.
Battery Inter-connecting Cable - 35mm cable with M8 - M8 Lugs (M8 on both ends)
Made up to size for you for connecting your batteries together.
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 50A
Contacts: Copper.Tin plated
Degree of protection: IP67
Flame class: UL94-V0
Wire size range: 6mm2
10mm cable - Charge Controller to Batteries - 2 Meter with M8 Lug
You will need 2 cables per charge controler (Pos & Neg). The Lugs are on 1 end only as the charge controllers have bare wire connectors.
If you need longer please let us know
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
Simple DIN mount rail 10cm long for DC or AC DIN mount breakers. Easy solution, simply screw the rail to the wall of your electrical installation and connect the breakers to it. Quick easy and simple solution to install breakers to your solar system.
Use with our: