NEW 550Ah c20 (460Ah C5). 

2 VOLT, DEEP CYCLE WITH TUBULAR POSITIVE PLATE, 1500 CYCLE LIFE  EXPECTANCY TO 80% DOD.

198mm x 83mm x 553.5mm height,  26.7kg wet.

Charge Voltage Settings

Bulk / Absorb 2.40V per cell.
Float 2.23V per cell.
EQ 2.47V per cell.

Other information

The battery will come strapped together on a pallet and will be fully charged.  There will be all cables necessary for connection between cells, but the connections will not be made.  Listing is NOT inclusive of battery box.  If you would like a dedicated battery box we would be pleased to quote when we know your requirements. Auto watering can also be requested as a quote.

The connectors are a Enersys type, that protect the M10 bolt from corrosion.  If you take a flat head screw driver you can pop the cap off which will expose the bolt.
The bolts are M10.

Configuration is normally 3 x 4 or 6 x 4 (as above) etc .
If unusual - eg all in a row - we will request specific cables to manage this from the supplier - please let us know your requirements.

A forklift is heavily advised.

FOR LARGE PANEL DELIVERY TIMES, SCHEDULES AND COSTS - CLICK HERE

Super High Efficiency Mono PERC Module (CS6R-410MS)   Dimensions: 1722 X 1134 X 30mm

Cables from rear junction box are approx 1m positive and 1m negative.

This panel has a silver frame.

CANADIAN SOLAR INC.is committed to providing high quality solar products, solar system solutions and services to customers around the world. As a leading PV project developer and manufacturer of solar modules with about 30 GW deployed around the world since 2001, Canadian Solar Inc. is one of the most bankable solar companies worldwide.

With proprietary mono wafer and cell technologies Canadian Solar have developed an extraordinary module rage. Combining the best technology and design, it also reduces LCOE and installation costs.

The Super High HiKu mono modules with dimensions of 1722 X 1134 X 30mm, have the following unique features:

MORE RELIABLE (THANKS TO HALF CUT CELL TECHNOLOGY):

• Lower internal current, lower hot spot temperature
• Cell crack risk limited to smaller area of the cell
• Innovative symmetrical module design means better shading tolerance
• Heavy snow load up to 5400Pa and increased wind load up to 3600Pa

Cell: 120 x dual-cell Mono, 156 x 78 mm

Dimensions: 1722 X 1134 X 30mm

Weight: 21.3 kg

THE NEW VFXR-SERIES
7 Features In One Device

GENERATOR MODE - CONNECT THE VFXR TO ANY GENERATOR:
1. Cover current consumption
2. Charge batteries

SUPPORT MODE- CONNECT THE VFXR TO ANY INVERTER TO EXPAND THE OUTPUT POWER:
1. Cover consumption with your inverter (any brand)
2. Cover your additional consumption with the VFXR (in cooperation with any brand)

GRID TIED MODE - INJECT EXCESSIVE POWER TO THE GRID:
3. Charge your batteries
4. Sell not consumed power to the grid

UPS MODE - USE THE BATTERIES IF THE GRID FAILS:
5. Cover consumption with the grid
6. In case of grid failure, switch to batteries without interruption

GRIDZERO MODE - USE THE GRID IF SOLAR POWER IS NOT AVAILABLE AND COVER HIGHER LOADS WITH SMALL INVERTERS:
7. Cover consumption with solar power (even with small inverters)
8. Take additional power from the grid to double the output of your inverter

MINI GRID MODE - USE THE GRID WHEN BATTERIES ARE LOW:
9. Cover consumption with solar power
10. Connect to the grid when batteries are low

BACKUP MODE - COVER GRID FAILURES WITH YOUR SOLAR SYSTEM:
11. Cover consumption with the grid
12. In grid failure, switch to solar system

The latest, most advanced features on the industry’s most trusted and proven platform—that’s the essence of OutBack’s new FXR Series of Grid/Hybrid inverter/chargers. Capable of off-grid or grid-connected operation in a single model, the FXR Grid/Hybrid inverter/chargers provide system designers with unprecedented flexibility and compatibility for nearly
any power conversion scenario.

The new FXR features and technologies on the acclaimed FX platform include:

• Both off-grid and grid-tied functionality in one unit
• Seven programmable modes, including GridZero and Support Mode, and built-in networked communications
• Advanced Battery Charging (ABC) with expanded charging voltages and time parameters, enabling system designers to accommodate the specific charging profiles and algorithms of new and emerging energy storage technologies including Lithium Ion, Aqueous Ion and Flow Chemistry batteries
• Easy system upgradability in the field

FXR inverter/chargers can be paired with a MATE3 to add OPTICS RE to monitor and control system performance from any location. Available in power ranges from 2000W-3000W, multiple units may be stacked and connected with other OutBack Power electronics for more seamless system integration and the ability to function in a wide variety of applications, and system sizes. Up to nine inverters can be combined in a 3-phase system with the 12V, 24V or 48V models, and up to 30kW in a grid-tied 24V or 48V system. The exclusive modular system architecture means that increased power output is just an additional FXR inverter/charger away.

Available in sealed or vented units with NEMA type 1 die-cast aluminum chassis designed to operate in the harshest environmental conditions such as high temperatures, humidity or corrosive salt air, the FXR’s continue in OutBack’s tradition of absolute dependability in mission critical installations no matter how harsh or challenging the conditions.

Please Note: The new VFXR range only work with a Mate 3 (the standard Mate or Mate B will not work with them)

Info and Specs on Outback site

Excellent Nemo 2000W 48V wind turbine with built in controller and dumpload

•New fresh design blades can start in breeze wind
•bull;Sleek design and aesthetics
•A power generator weighing 7.2kg and a maximum 4.5kW power output is used for the Nemo.
•Produces energy in very low wind speeds
•Quiet operation
•Wireless monitor
•Designed for long running life(15 years)
•Rated at 2.0 kW
•3 year warranty

Popular Questions:

Q:  Do these units need spares for maintenance? 

A:  The wind generator is basically a maintenance-free system, so it does not need special maintenance.

Q:  How long do the bearings and gearbox last?

A:  The wind turbine shaft is a direct drive alternator, so there no gearbox. The bearing is Japanese NSK bearings, the design life is more than 8 years.

Wind Turbine Type: Horizontal axis, up-wind
Rotor Diameter: 1776mm (69.9")
Mass: 18kg (38lbs. 8oz)
Mount Diameter: 48.6mm (1-15/16")
Number of Blades: 3
Blade Material: Carbon-fiber
Blade Mass: (per piece) 532g
B ody Material: Aluminum diecast
Product Finish: Teflon-based paint
Generator: Synchronous-type, three-phase power generator with neodymium iron boron magnets
Protection Circuit Built-in
Data Logger: Built-in
Yaw control: Free yaw (360 degrees)
Direction Control: Swing-tail
Output Control: Non-stop output control
Start-up Wind Speed: 3m/s
Cut-out Wind Speed: -
Survival Wind Speed: 49.2m/s
Rated Rotor Speed 1000rpm
Maximum Power: 2.0kW (20m/s)
Maximum Rotor Speed: 1000rpm (20m/s)
Output Voltage: DC48V

The charge voltage range: 48V to 57.2V
The float:56V
Braking System: Regenerative electromagnetic braking system
Off-grid :420Ah or more, flooded, deep cycle, marine grade batteries.
Braking System: Regenerative electromagnetic braking system
Communication System (Signal Output) Recommended system: Wireless 2-way interface remote system
Off-grid :Four-12V, 420Ah or more, flooded, deep cycle, marine grade lead-acid batteries.

These are the best charge controllers on the market, they are solid, reliable and what we use for The Bimble Inn.

The FLEXmax family of charge controllers is the latest innovation in Maximum Power Point Tracking (MPPT) charge controllers from OutBack Power Technologies. The innovative FLEXmax MPPT software algorithm is both continuous and active, increasing your photovoltaic array power yield up to 30% compared to non-MPPT controllers. Thanks to active cooling and intelligent thermal management cooling, both FLEXmax charge controllers can operate at their full maximum current rating, 60 Amps or 80 Amps respectively, in ambient temperatures as high as 104°F (40°C).

Included in all of the FLEXmax Charge Controllers are the revolutionary features first developed by OutBack Power, including support for a wide range of nominal battery voltages and the ability to step-down a higher voltage solar array to recharge a lower voltage battery bank. A built-in, backlit 80 character display shows the current status and logged system performance data for the last 128 days at the touch of a button. The integrated OutBack network communications allows FLEXmax series Charge Controllers to be remotely programmed and monitored via a MATE system display and provides unrivaled system integration.

FLEXmax MPPT Charge Controllers are the only choice when you demand a high performance, efficient and versatile charge controller for your advanced power system.

A note on Outback and lithium:  Outback MPPT's can't be controlled by a Lithium battery BMS that needs comms, so you can't use e.g. Pylontech with them. But, you can set up certain charging profiles that are suitable for lithium batteries that have a dumb BMS that doesn't need communication. With Outback systems we sell and recommend Gcell batteries.

Using an Outback controller would invalidate any Pylon battery warranty, as the Pylons need to be able to control the charging voltage and current.

The new MATE3 System Display and Controller makes it easy to program and monitor a OutBack Power System. An intuitive and integrated system configuration wizard makes system setup and programming quick and seamless.

The ability to set unique multi-level user passwords allows the user to secure critical system settings from unintended changes, while still allowing open access to necessary functions.

The MATE3 is packed full of features to make system management simple. The easy-to-read graphical LCD display is backlit for dark operating conditions. Improved tactile buttons and a user programmable “favorite” key give you immediate access to the features you want, while an intuitive scroll wheel interface allows for easy adjustment of system setpoints. Expandable SD card memory allows you to increase data logging capacity as well as upgrade units in the field.

A built-in clock and calendar function enables timer-based programming of inverter and charger operation. All of your settings are stored in permanent memory to eliminate the need to reprogram in the event of a system shutdown or battery replacement. The MATE3 is an Internet enabled device – simply connecting to the Internet will allow full remote system.

By adding the Mate Controller you can also use the outback inverters as a off grid/grid hybrid system allowing you to use the power from your batteries primarily and switching to use the grid when your batteries are low, thus minimising your use of the grid and ensuring you get the best use of your renewable power set-up, and yet never run out of power.  Or you can configure an automatic generator start from them if needed.

Product Features:

• Program, Manage, and Monitor
• User Friendly Interface
• Easy-To-Read Graphical Display
• System Configuration Wizard
• Internet Enabled
• Field Upgrade-able
• Up to 1-Year Data Logging
• SD Memory Card Slot

This outdoor rated combiner box is for safely combining larger strings of solar panels >= 3. The box comes fitted with Din rail and 10 X M20 glands with a cable outer diameter range of 5 - 10mm.

The enclosure features knock out discs so no drilling is required. Just punch out the number if gland spaces required, and fit the glands. You must select the fuse holder, fuses, bus bar, feeder terminal and extra glands if required for your system.  See related items tab above to see the breakers that fit. If fusing positive conductors only, select Din rail block to combine the negatives. It is possible to mount he box without puncturing it thus maintaining the IP waterproof rating

Outside dimensions: 182 X 180 X 111mm

Inside dimensions: 167 X 165 X 96mm

Effective Din rail length: 150mm

Number of gland knock outs: 8 X M20, 1 X M25 or M32 (top & bottom), 4 X M20, 1 X M32 or M40 (left side and right side)

6mm² Solar Cable - Price is for a 100 meter reel. If you wish to buy in lower quantity meter lengths, please see https://www.bimblesolar.com/6mmcable

Double Insulated UV protected solar cable

Max load: 70A in air

Our solar cable is ozone resistant according to BS EN 50396

UV resistant according to HD 605 S2 and is tested for durability according to EN 60216

Flexible tinned copper conductor

Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black
Other colours available on request if bulk order

HUB-4 Communication Manager

The HUB-4 communication manager allows the MATE to control and monitor a maximum of four OutBack products. The inverter/chargers can be operated in a stacked or independent configuration, and OutBack MPPT charge controllers can also be used on any of the four available ports of the HUB-4. Future OutBack products will also be compatible with the HUB-4. The HUB-4 manages both the inter-inverter communications and the MATE-inverter communication. The HUB-4 also can be used with the X-240 autotransformer when series stacked to allow full surge and continuous AC load capacity of each FX to be available on either of the 120 VAC output circuits. When two or more FX inverters are stacked in a parallel or series configuration, the system automatically turns off any excess slave inverters to save power and maximize conversion efficiency. This power save system is fully automatic and works with or without the MATE connected to the system One or two MATE system controllers and displays can be connected to the HUB. One Mate is allowed to program the systems while the other MATE is able to only control and display the system operation. When using a single MATE with a HUB-4, programming can be locked out by moving the MATE from the 1st MATE port to the 2nd MATE port once programming has been completed. The maximum distance from the HUB-4 to the power conversion product should be under 10 feet. OutBack includes two 3 foot long and two 6 foot long CAT5 cables standard with the HUB-4.

10mm tinned copper Solar Cable - Price is per meter simply select the quantity as the number of meters you want.

Double Insulated UV protected solar cable, 6.9mm Outer Diameter, Halogen-free cross-linked

Max load: 98A

European standard solar cable intended for the interconnection within photovoltaic systems such as solar panel arrays. Suitable for fixed installations, internal and external, within conduit or systems, but not direct burial applications. Our solar cable is ozoneresistant according to BS EN 50396, UV resistant according to HD 605 S2 and is tested for durability according to EN 60216.

300A Battery isolator switch, 900A for 30 secs, up to 48 Volt, M10 connection. Can be use on 12, 24 or 48 Volt system as long as switch current rating is not exceeded.

BLUE SEA M-SERIES SELECTOR SWITCHES

M-SERIES BATTERY SWITCHES

300 Ampere continuous rating.

• Tin-plated copper studs for maximum conductivity and corrosion resistance
• Studs accept 3⁄8" (M10) ring terminals
• 7⁄8" (22mm) stud length accepts multiple cable terminals
• One-piece terminal stud design never loosens over time
• Case design allows surface or rear panel mounting options
• Label with international legends
• Tactile indicator conveys knob position by feel

Regulatory

• CE marked, ISO 8846
• UL Listed - UL 1107 electric power switches
• Meets ABYC requirements
• Meets UL1500 and SAE J1171 external ignition protection requirements
• IP66 protects against powerful water jets

Surface Mounting Bracket for Mate 3 Controller.

**Please note: these fuse holders are designed to be opened in a specific way (see attached diagram in downloads section for guidance). Failure to follow the correct method will result in damage to the fuse holder, which is not covered by warranty.**

One pole fuse holder for NH type fuses, suitable for protecting and isolating cables between the battery and inverter or charge controller and battery. Integrated handle enabling use as an isolator.

NH00 rated at 250VDC, 160A

Choose NH00 or NH000 fuse separately

Item dimensions 170mm H X 42mm W X 80mm D

STÄUBLI MC4 Solar PV connectors - Pair 

Connect your solar modules together with ease using these safe and durable genuine Staubli MC4 connectors. Snap-in lock. MC4 crimp tool required to make onto cable ends. YOUTUBE VIDEO

Manufacturer SKU
32.0016P0001-UR & 32.0017P0001-UR

See DOWNLOADS TAB for datasheet

 Technical specifications

*Please note male and female refers ot the metal conductor and not the plastic insulator*

4 Way unit can hold our Tomzn DC and AC breakers

 Unit can hold the following options:

• 2 x AC RCBos
• 4 x DC breakers Under 60A
• 2 x DC breakers 80A - 125A

This is an empty unit, you must add the breakers you need to your cart as well, see related items tab above to see the breakers that fit.

Affordable DC Breaker for 35mm DIN mount.  Use with our DIN Rail as an easy and affordable breaker solution.

Current Flows from top to bottom of the breaker: 
For charge controller wire top pole to charge controller and bottom pole to battery. 
For Inverter wire top pole to battery and bottom pole to inverter.

Affordable DC Breaker for 35mm DIN mount.  Use with our DIN Rail as an easy and affordable breaker solution.

Current Flows from top to bottom of the breaker: 
For charge controller wire top pole to charge controller and bottom pole to battery. 
For Inverter wire top pole to battery and bottom pole to inverter.

6mm squared flat pin lug for crimping onto 6mm² multi-stranded battery or solar cable. Allows for neat and secure termination of cable into screw terminals in charge controllers or our PV combiner boxes. Tin plated copper. Made in the UK 

NH000 high capacity fuses suitable for protection of cables from batteries to inverters or charge controllers.

Fuses are rated at 250VDC

A small, low cost multimeter supplied with test leads and holster.

• 3½ digit, 1999 count display
• AC/DC voltage measurement
• DC current
• Resistance measurement (20R to 2MR)
• Diode, continuity and transistor tester
• Square wave output
• Low battery indication
• Requires a 9V PP3 battery (included)

DMM Functions: DC Current, AC/DC Voltage, Continuity, Diode, Resistance, Transistor
No. of Digits: 3.5  
DMM Response Type: Average  
Display Count: 1999  
Range Selection: Manual  
Voltage Measure DC Max: 500V  
Voltage Measure AC Max: 500V  
Current Measure DC Max: 5A  
Resistance Measure Max: 2Mohm  

10mm squared flat reducing pin lug for crimping onto 10mm² multi-stranded battery or solar cable. Allows for neat and secure termination of cable into screw terminals in charge controllers or our PV combiner boxes. Tin plated copper. Made in the UK 

16mm squared cable end lug for crimping onto 16mm² multi-stranded battery cable. Heavy duty lug with flared cable entry. Tin plated copper. Made in the UK