Availability: In Stock - Delivery or collect from Lewes
FOR LARGE PANEL DELIVERY TIMES, SCHEDULES AND COSTS - CLICK HERE
Listing is for one panel, just add the required number of panels to your basket.
54 CELL DELTA 295W
295W MONOCRYSTALLINE SOLAR MODULE
The 54 cell, Black Plus is ideal for UK roofs due to its compact design that allows more panels to be installed in tighter spaces to maximise the solar potential of every roof. Black Plus Series is an excellent all-round module, which is sleek and robust. Proven performance, stylish appearance and high-efficiency monocrystalline PERC cells. Concealed link busbars at either end of the module provide a more elegant finish than other black modules on the market. Crafted with precision and expert skill, the Black Plus Series offers outstanding build quality and reliability.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
New XTRA series - 3rd Generation MPPT - Budget Model
For 12V Solar System: 520W solar panel (100V for max input voltage)
For 24V Solar System: 1040W solar panel (100V for max input voltage)
No Fan for silent operation, great for vans, boats or any live in spaces
Budget Model with no display. Can connect MT50 for remote display.
New XTRA series has Lithium battery support (set via PC cable only)
The XTRA tracer models have a current limiting function, you can connect 1.5 times the rated power to the controller so if your on a budget you can use a smaller controller with more panels so that you get more power in winter or low light but don't risk overloading the controller in the summer. The output will be limited to the max listed above.
New EPEver (Tracer) series is EPsolar’s third generation of MPPT controller.
XTRA series are advanced maximum power point tracking (MPPT) charge controllers, for off grid photovoltaic systems, with display unit.
In order to maximise the energy harvest from PV arrays and simultaneously minimise the power loss within a wide range of operating conditions, XTRA series apply an advanced smart algorithm which results in up to 30% higher efficient charging, compared to a conventional pulse width modulation (PWM) charge controller. Xtra series controller have limit protection function on charging current &charging power, as well as auto derating power operation at high temperature; the above protection ensure the stability of system even at exceeded rated PV power and over temperature conditions.
Protection class IP32 and isolated RS485 communication port further improve the controller’s reliability under different application requirements. XTRA series controllers incorporate a self-adaptive three-stage charging algorithm based on a digital control circuit, which effectively prolongs the lifespan of battery and significantly improve the system performance. It also has extensive electronic protection for overcharge, over discharge, PV&battery reverse polarity and etc. to ensure the sustainability and durability of the off grid solar system.
Features:
Advanced MPPT technology & ultra-fast tracking speed is up to 99.5% guaranteed
Maximum DC/DC transfer efficiency is as high as 98%, full load transfer efficiency is up to 97.4%
Wide MPP operating voltage range
Low temperature protection and self activate function for lithium battery charging
Limit charging power & current over rated range
Real-time energy statistics function
Multiple load work modes
Comprehensive electronic protection
Compatible with lead acid and lithium-ion¹ batteries
Over temperature protection and power degrading in higher temperature
Optional LCD display units (XDB1/XDS1/XDS2) and accessories
High quality and low failure rate components of ST or IR to ensure service life
Isolated RS485 communication port with 5V/200mA protected output, with standard Modbus protocol Monitor and set the parameters via APP or PC software
Dustproof and waterproof design with IP32² protection class
CE certification(LVD IEC62109,EMC EN3/1-6-61000)
2 Year Warranty
¹ If using Lithium battery, customer should use “PCsoftware” to set the lithium battery parameters
² Ingress of solid objects:Protected against solid objects over 2.5mm
² Ingress of liquids: Protected against falling drops of water, if the case is disposed up to 15 from vertical
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
Introducing our aluminium tilting brackets as a cheaper option to maximise the power from your solar panels.
We've used marine grade aluminium (5083) to reduce costs yet retain strength, removed the chain whilst leaving the hole so the panel can be secured to the bracket & have used marine grade stainless steel hex bolts instead of anti tamper ones - all of this has enabled us to reduce the price to £48 a pair.
We've also removed the slot so that although they still swivel they no longer tilt or fold flat to your roof however, this modification means that extra panels can be supported using just one additional upright, so a two panel bracket system can be yours from just £72 and further panels added & supported for from £24 per panel. We supply an additional hex bolt to support the middle panels.
Although our other brackets are a superior, more secure solution these new brackets offer a cheaper solution to maximise your panels output throughout the year.
Listing is for 1 mounting bracket, you must order 2 for mounting one solar panel or 3 for mounting two panels etc - SEE BELOW:
PLEASE NOTE: The fixings included for this product assume you will be installing any multiple panels in ONE ROW. Eg. If ordering a pair of these brackets, you would receive 2 Aluminium brackets, 4 Bolts, TWO fixing spindles, TWO washers and TWO wing nuts. If ordering 3 Brackets (for 2 panels in a row) you would receive 7 bolts, if ordering 4 brackets - 10 bolts, if 5 Brackets (eg. 3 panels in a row) - 13 bolts etc.
However in each case you will by default still receive TWO fixing spindles, TWO washers and TWO wing nuts PER ORDER.
IF you require more as you will not be fixing in a single row, please use the ORDER NOTES field at checkout to request more
eg 'I have 4 panels in two separate pairs, therefore I need 6 brackets and parts to go with'
DIMENSIONS:
Longest face - 161mm at widest point. 85mm at it’s narrowest point (before curve). 257mm long
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
Optional Meter for AN, BN, CN, XTRA MPPT charge controllers. DuoRacer requires the MT11, see separate listings.
Comes with 2m RJ45 cable in the box, if you need longer we have a 5m cable here 5m RJ45 Cable for MT50
PLEASE NOTE - YOU CANNOT USE THE MT50 AT THE SAME TIME AS THE BLUETOOTH / WIFI OPTIONAL ADAPTORS
Features:
·Automatic identify the controller, and display the type, model and relevant parameter data
·Large-screen multifunction LCD displays all the operational data and system working status in digital, graphic and textual forms
·With six navigation function keys, the operation is direct, convenient and rapid
·Real-time energy statistics recording
·Both data and data flowing on the same lead, no need for external power
·Real-time monitoring and acoustic alarm of failure information of the controller
·Longer communication distance based on RS485
Functions Via MT50
·Diversified load control modes : manual, light ON/OFF, Light ON+ Timer, Time Control
·Battery type selection: Gel, sealed, flooded and USER type
·Real-time monitor
·Programmable parameters
·Energy display function
Please note: Older MT50s manufactured before August 2017 are not compatible with the newer XTRA and AN controllers.
Use with lithium batteries: The MT50 ( sv 2.18 version) can be used to program a lithium battery for our XTRA controllers. However it cannot do this for the Tracer-AN 60A and 100A. You must use a PC cable and software for programming lithium.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
3 Way unit can hold our Tomzn DC and AC breakers
Unit can hold the following options:
1 x AC RCBos
3 x DC breakers Under 80A (2 x DC breakers if under 63a and using cable entry glands)
1 x DC breakers 80A - 125A
1 x DC Breakers Under 63A AND 1 x DC Breaker 63A - 125A
Best practice would be to use this unit with no bigger than 10mm square cable and appropriately sized breakers if you are using it with glands for a water tight fit. If you are using it in an environment that is already dry and dust free the use of glands may not be necessary.
This is an empty unit, you must add the breakers you need to your cart as well, see related items tab above to see the breakers that fit.
You will also need suitable cable entry glands - please see related products tab.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
A small, low cost multimeter supplied with test leads and holster.
3½ digit, 1999 count display
AC/DC voltage measurement
DC current
Resistance measurement (20R to 2MR)
Diode, continuity and transistor tester
Square wave output
Low battery indication
Requires a 9V PP3 battery (included)
DMM Functions: DC Current, AC/DC Voltage, Continuity, Diode, Resistance, Transistor
No. of Digits: 3.5
DMM Response Type: Average
Display Count: 1999
Range Selection: Manual
Voltage Measure DC Max: 500V
Voltage Measure AC Max: 500V
Current Measure DC Max: 5A
Resistance Measure Max: 2Mohm
Customise This Bundle
You can alter this bundle to suit your needs, simply click the button below to add all the items to your cart separately, you can then edit your cart as you need.
