Bought an off grid kit, Had some technical questions on what to buy, reply in 24hrs
Ordered on sunday, delivered on tuesday. Fantastic customer service that is rare these days.
Trustpilot
Bought many panels, inverters and batteries from Bimble in 2022 and had very good communication via email and phone. Batteries did take a long time to arrive, but this is/was an industry problem and every time I asked I got an update. When I requested priority shipping for my own logistics when they finally came in stock, it was sent right on time.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
For 12V Solar System: 1250W solar panel (200V for max input voltage 180V@ 25C)
For 24V Solar System: 2500W solar panel (200V for max input voltage 180V@ 25C)
For 48V Solar System: 5000W solar panel (200V for max input voltage 180V@ 25C)
No Fan for silent operation, great for vans, boats or any live in spaces
**The controller can only set lead-acid battery types. Lithium battery types must be set with a PC or APP.**
The AN tracer models have a current limiting function, you can connect up to 1.5 times the rated power to the controller so if your on a budget you can use a smaller controller with more panels so that you get more power in winter or low light but don't risk overloading the controller in the summer. The output will be limited to the max listed above.
Supports up to 6 units in parallel with a PTA adapter for communication and equalize of the paralleled units
Tracer AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard. MSRT can guarantee very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system; Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer AN products can rapidly track the maximum power point (MPP) of PV array to obtain the maximum energy of the panel. The limitation function of the charging power and current and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment.
With the adaptive three-stage charging mode based on digital control circuit, Tracer AN series controllers can effectively prolong the life-cycle of battery and significantly improve the system performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power system. All-around electronic protections, including overcharging, over discharging, and PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for a longer service time. The isolated RS485 interface with standard MODBUS communication protocol and 5V power supply makes it easy for customer to expand the application, Support up to 8 charging in parallel to expand system and meet with different monitoring requirements, so that can be widely used for various applications, e.g. solar RV, household system and field monitoring, etc.
Features
CE certification(LVD EN/IEC62109,EMC EN61000-6-1/3)
High quality & low failure rate components of ST and Infineon to ensure the product’s life
Advanced MPPT technology & ultra-fast tracking speed is up to 99.5% guaranteed
Maximum DC/DC transfer efficiency is as high as 98.7%
Advanced MPPT control algorithm will minimize the MPP loss rate and loss time
The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP
The wider range of MPP operating voltage.
Auto control system to limit the charging power & current go over the rated value.
Support 4 charging options: Sealed, Gel, Flooded and User.
Battery temperature compensation function
Real-time energy recording and statistical function
Automatic over-temperature power reduction function
Hundred percent full load operation in working environment temperature range within charging & discharging
Support up to 6 units in parallel to expand system
Load relay control external load switch signal to realize diversified load work modes
The first and the second disconnection of load control, contain two relay’s contact.
Auto-control of utility and generator relay design
Utility or generator auto-control relays make it easy to compose the hybrid power system
The remote temperature and the voltage sensor design will collect accurate data of battery temperature and voltage
Isolated RS-485 with 5VDC/200mA to protect output for no power devices with MODBUS protocol
To monitor or set the parameters by using the phone Apps or PC software.
Protection:
PV Over Current/power • Night Reverse Charging • Battery Overheating
A pair of 2mm stainless steel (316L) solar panel brackets designed with canalboats and vehicles in mind, supplied with anti tamper bolts & bit.
Allow your solar panels to both tilt and swivel throughout the year, maximising the sun's energy whilst providing excellent ventilation. This can improve the power of your panels by up to 40%, perfect for smaller systems where efficiency is key. *Standing at just over 25cm high and 16cm wide they're designed to maximise the angle of your panels whilst being low enough for most bridges and tunnels.
Using any padlock attach your panel securely to the roof via an integrated 8mm stainless steel chain that secures directly to the bracket, keeping your panels safe. The anti tamper bolts secure the bracket to your roof for maximum security deterring even the most determined of thieves.
Using M10 for both bolts and glands means you only need to drill six identical holes, saving both time and money on tools or labour whilst providing a safe and secure mounting solution.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
Ideally 6mm solar cable max - for bigger units with bigger cable click here
Unit best used for housing 1 x AC RCBos, string fuse holders and fuses up to 32a as opposed to DC Din Mount breakers.
Best practice would be to use this unit with no bigger than 6mm square cable and appropriately sized breakers if you are using it with glands for a water tight fit. If you are using it in an environment that is already dry and dust free the use of glands may not be necessary.
This is an empty unit, you must add the breakers you need to your cart as well, see related items tab above to see the breakers that fit.
You will also need suitable cable entry glands - please see related products tab.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
A small, low cost multimeter supplied with test leads and holster.
3½ digit, 1999 count display
AC/DC voltage measurement
DC current
Resistance measurement (20R to 2MR)
Diode, continuity and transistor tester
Square wave output
Low battery indication
Requires a 9V PP3 battery (included)
DMM Functions: DC Current, AC/DC Voltage, Continuity, Diode, Resistance, Transistor
No. of Digits: 3.5
DMM Response Type: Average
Display Count: 1999
Range Selection: Manual
Voltage Measure DC Max: 500V
Voltage Measure AC Max: 500V
Current Measure DC Max: 5A
Resistance Measure Max: 2Mohm
Customise This Bundle
You can alter this bundle to suit your needs, simply click the button below to add all the items to your cart separately, you can then edit your cart as you need.