Availability: In Stock - Delivery 1-5 days or collect from Lewes
Made by Sunpower with super high effeciency cells, and designed to be stuck down, these are great for vans, campers and boats. They are light weight at just 2Kg each and you can just stick to your roof even if curved with CT1 which we have here.
We can ship this panels worldwide. As they are not glass panels, so we can ship with standard couriers at affordable rates.
SunPower SPR-E-Flex-110 Flexible Solar Panel - High Power and Flexible
Made with SunPower’s highest power Gen II back contact cells, SunPower’s flexible panels deliver the highest power output and the highest charging capacity in their product class. SunPower’s panels are constructed with top-grade, light-weight polymer materials, allowing for easy transport, installation and panel flexing up to 30 degrees.
Designed for Toughness
The SunPower Maxeon Solar Cell is the only cell built on a solid copper foundation. Flexible panels made with SunPower cells are resistant to power loss via cracking and corrosion, unlike conventional cells, which are much more likely to lose power when bent or subjected to a moist environment. SunPower flexible panels are the #1 choice for customers due to the combination of high power and cell ruggedness
Easy and Low Cost Installation
The panel includes MC4-compatible quick connectors and can be installed with adhesives or by using the included stainless steel grommets.
Designed in USA made in France
Please note: These panels are not designed to be walked on, and are designed for solo use only, not in an array. They must not be connected in series or parallel.
Delivery
As theses are non-glass panels we can use standard couriers for delivery so delivery is available worldwide.
Warranty: 5 Year Power and 2 Year Product. No salt water exclusion
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
New XTRA series - 3rd Generation MPPT
For 12V Solar System: 130W solar panel (60V for max input voltage)
For 24V Solar System: 260W solar panel (60V for max input voltage)
No Fan for silent operation, great for vans, boats or any live in spaces
With built in LCD advanced display and programming screen (XDS2)
New XTRA series has Lithium battery support
The XTRA tracer models have a current limiting function, you can connect 1.5 times the rated power to the controller so if your on a budget you can use a smaller controller with more panels so that you get more power in winter or low light but don't risk overloading the controller in the summer. The output will be limited to the max listed above.
New EPEver (Tracer) series is EPsolar’s third generation of MPPT controller.
XTRA series are advanced maximum power point tracking (MPPT) charge controllers, for off grid photovoltaic systems, with display unit.
In order to maximise the energy harvest from PV arrays and simultaneously minimise the power loss within a wide range of operating conditions, XTRA series apply an advanced smart algorithm which results in up to 30% higher efficient charging, compared to a conventional pulse width modulation (PWM) charge controller. Xtra series controller have limit protection function on charging current &charging power, as well as auto derating power operation at high temperature; the above protection ensure the stability of system even at exceeded rated PV power and over temperature conditions.
Protection class IP32 and isolated RS485 communication port further improve the controller’s reliability under different application requirements. XTRA series controllers incorporate a self-adaptive three-stage charging algorithm based on a digital control circuit, which effectively prolongs the lifespan of battery and significantly improve the system performance. It also has extensive electronic protection for overcharge, over discharge, PV&battery reverse polarity and etc. to ensure the sustainability and durability of the off grid solar system.
Features:
Advanced MPPT technology & ultra-fast tracking speed is up to 99.5% guaranteed
Maximum DC/DC transfer efficiency is as high as 98%, full load transfer efficiency is up to 97.4%
Wide MPP operating voltage range
Low temperature protection and self activate function for lithium battery charging
Limit charging power & current over rated range
Real-time energy statistics function
Multiple load work modes
Comprehensive electronic protection
Compatible with lead acid and lithium-ion¹ batteries
Over temperature protection and power degrading in higher temperature
Optional LCD display units (XDB1/XDS1/XDS2) and accessories
High quality and low failure rate components of ST or IR to ensure service life
Isolated RS485 communication port with 5V/200mA protected output, with standard Modbus protocol Monitor and set the parameters via APP or PC software
Dustproof and waterproof design with IP32² protection class
CE certification(LVD IEC62109,EMC EN3/1-6-61000)
¹ If using Lithium battery, customer should use “PCsoftware” to set the lithium battery parameters
² Ingress of solid objects:Protected against solid objects over 2.5mm
² Ingress of liquids: Protected against falling drops of water, if the case is disposed up to 15 from vertical
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
One pole DIN rail mount fuse holder for 10 X 38 type fuses, suitable for protecting and isolating solar panel strings between the array and the charge controller input for example.
Rated to 1000VDC, 32A, accepts up to 16mm² cable. For use stand alone or for incorporation into a PV combiner Box with the 13 way bus bar and feeder terminal to take off the supply to a solar charge controller or solar inverter.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
3 Way unit can hold our Tomzn DC and AC breakers
Unit can hold the following options:
1 x AC RCBos
3 x DC breakers Under 80A (2 x DC breakers if under 63a and using cable entry glands)
1 x DC breakers 80A - 125A
1 x DC Breakers Under 63A AND 1 x DC Breaker 63A - 125A
Best practice would be to use this unit with no bigger than 10mm square cable and appropriately sized breakers if you are using it with glands for a water tight fit. If you are using it in an environment that is already dry and dust free the use of glands may not be necessary.
This is an empty unit, you must add the breakers you need to your cart as well, see related items tab above to see the breakers that fit.
You will also need suitable cable entry glands - please see related products tab.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
Sikaflex®-522 is a low emission 1-component Silane Terminated Polymer (STP) sealant/adhesive. It has a high weathering and mold resistance. Sikaflex®-522 meets highest EHS standards. It bonds well to a wide range of substrates with minimal pre-treatment.
High ageing and weathering resistant
High fungicidal resistance
Very low emission and odor
PRODUCT BENEFITS
High ageing and weathering resistant
High fungicidal resistance
Very low emission and odor
Bonds well to a wide variety of substrates without the need for special pre-treatment
High colour stability under UV
Isocyanate, solvent, phthalate and silicone-free
Meets hygiene requirements for ventilation and air-conditioning systems and units according VDI 6022 Blatt 1:2011-07
ISEGA certificate for foodstuff area usage
EC1+ certificate
Usage
Sikaflex®-522 adheres well to a wide variety of substrates and is suitable for interior and exterior elastic sealing and bonding applications. It is suitable for applications in areas of air ventilation and incidental food contact. Suitable substrate materials include timber, glass, metals, metal primers and paint coatings (2-part systems), ceramic materials and plastics. Seek manufacturer’s advice and perform tests on original substrates before using Sikaflex®-522 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed ensuring adhesion and material compatibility.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
Protect your off-grid or grid tied PV system from unexpected string faults using Mersen’s HelioProtection® fuse line
Developed specifically for the protection of PV string wiring for 1000VDC industrial rooftop and utility scale photovoltaic systems. Its robust construction makes it ideal for continuous temperature and current cycling withstand adding to system longevity. The 1000VDC rated fuse is designed for low minimum breaking capacity capabilities of 1.35 times the fuse rated current value, allows for safe circuit interruption under typical low fault current conditions produced by PV arrays.
The 10 X 38mm fuse can be used standalone with the DIN mount string fuse holder to fuse a single circuit or as a bank of fuses in a solar combiner box.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
Cable Gland Entry Box, use to connect through external surface. Perfect for solar panel cables coming from outside to controller.
This comes with a cradle for keeping your MC4 connectors in place and tidy.
Dimensions:
Length 182mm
Width 95mm
Customise This Bundle
You can alter this bundle to suit your needs, simply click the button below to add all the items to your cart separately, you can then edit your cart as you need.
