Designed for rough ambient conditions for stand alone or grid back up operation. Rated to give a power output of 3.0kW or 4.4kW for 30 min.
IP54 protection to allow outdoor installation if required.
High efficiency (>95%);
Low standby & idle consumption (25W/4W);
Operating temperature range of -25 to +60 deg C.
OptiCool system ensures high power in high temperatures by cooling the encapsulated transformer but keeping air ventilation away from coated circuit boards & electronics to ensure high protection for humid or salty atmospheres.
Inverters are used with the Sunny Island Remote Control which gives a single point of operation. One Remote Control is required per cluster of up to three inverters and includes integrated MMC/SD memory card reader to enable updates, transferring of parameter settings, for storing error/events lists, or data logging.
In single-phase systems only one SI3.0M-11 or SI4.4M-11 can be used. Three-phase systems can be achieved using a cluster of three SI3.0M-11 or SI4.4M-11 inverters, multi-cluster systems are not possible with these inverters.
For larger single-phase or multi-cluster 3-phase systems please see the Sunny Island 6.0H/8.0H
310W JA Solar Panels Mono Percium - All Black
Percium Cell
The latest in mono cell technology with passivated backside, local BSF and 4 Bus Bars from worldwide PV Cell leaders - JA Solar
First to reach >20.6% average cell efficiency in mass production
More Power Per m²
JA higher efficiency module type specially designed for UK rooftop market.
Maximise the kWp installation on the roof
Aesthetics
Homogeneous Black Mono cells.
Black Frame for anti-glare and pleasing appearance.
Lower System Cost
Reduced installation and BOS cost
Excellent Low-light Performance
Enhanced spectral response at longer wavelength boosts low-light performance, which can produce more than 1% additional power compared with conventional module at system side.
High Reliability
Passed "3xMCS" TÜV SÜD Thresher Long life Accelerated Stress Tests.
Full range of PID-resistance tests
Harsh climate environment endurance tests
Full set of long-term reliability tests
Manufacturing inspected and certified by leading institutes such as PI-Berlin, Franhoeffer, Sgurr, OST and Solar-IF
100% in-house automatic manufacturing
2X 100% EL inspection ensuring defect-free production
Over 500MWp of JA Solar panels installed in the UK. 10GWp Worldwide.
Other Features
Positive power tolerance: -0~+5W
Modules binned by current to improve system performance
Excellent mechanical load resistance: Certified to withstand high wind loads (2400Pa) and snow loads (5400Pa)
Use with Tracer MPPT's - for a single panel on a 12V system you can use a 30A MPPT with this panel.
This listing is for 1 panel, simply select how many you need in the quantity. There is NO MINIMIUM Order.
It's so easy to reap the benefits of solar power: The completely redesigned Sunny Boy 1.5/2.5 is the perfect inverter for customers who want to take full advantage of their small PV system. Among other features, it enables an increase in consumption of self-generated power, allows versatile uses, and is very easy to integrate into the home network. In addition, its innovative design and new communication concept offer many advantages during installation and commissioning. Thanks to direct communication with the SMA Energy Meter, both limitation to 70 percent, which is required in Germany, and limitation to 0 percent is possible.
EASY TO USE
WITH A NEW INSTALLATION CONCEPT
The innovative design of the Sunny Boy 1.5/2.5 is not only easy to install, but also allows for quick DC and AC connections. For example, because it weighs just 9 kg, it can be suspended from just two screws, with no additional wall mounting bracket. Commissioning is equally easy, because the integrated user interface (Web UI) makes it possible to choose the necessary settings in next to no time – without opening the cover.
INFORMATIVE
WITH AN INNOVATIVE COMMUNICATION CONCEPT
With its focus on what really matters, the Sunny Boy 1.5/2.5 also offers impressive communication features. The intuitive user interface (Web UI) makes it possible to monitor system data on any smartphone, tablet, laptop or traditional PC. This enables the user to choose between local and online monitoring via Sunny Places and Sunny Portal.
Since 1926 Crown Battery has responded to the 'power' challenges and individual needs of industry leaders with the best available products and services in the field of heavy-duty commercial deep cycle batteries.
A company-wide dedication to quality control and continual improvement has earned Crown Battery the highest quality and service rating in the industry. We put more into our deep cycle batteries so you can get more out of them...
More performance, More Productivity with Less Maintenance. Nobody builds them like Crown, because no one else invests in the heaviest, thickest plates in the industry. Ours are over 10% thicker than our competitors.
Combine that with our proprietary PROeye and our low maintenance container - features that make battery maintenance predictable and efficient - and you've got a battery that's going to last longer and perform like no other.
Crown out-performs the competition in head to head tests over and over again.
It must be a matter of perspective. But we aren’t prone to exaggeration, the way some of our competitors are.
If you claim to have batteries that out-perform all others, an independent laboratory should confirm the findings. That’s the way we do it at Crown. Since 1926, that’s all we’ve done. And to us, it really isn’t a matter of claiming to be first in the industrial marketplace. But being the best. Some manufacturers are comfortable making exaggerated claims.
We’re comfortable making battery history… one customer at a time.
The heaviest, thickest plates in the industry. Thicker plates, heavier lead connections, and the most active lead material per ampere hour of rated capacity. And heavy means more lead, more active material. Which means more power. Longer life. Who would you put your money on? A lightweight battery? Or the heavyweight of the world. Crown.
Nominal Capacity | 105 AH (20hr rate), 85 AH (5hr rate) |
Nominal Voltage | 12 volt |
Reserve Capacity Minutes / Amps | 165 mins @ 25 Amps |
Length | 321mm |
Width | 171mm |
Total Height | 235mm |
Weight | 23.6kg |
Product Foot Note | DIJKL (see product footnote key) |
Charging | Please download the product data sheet for more information |
Storage | Batteries should be stored in a dry and cool area in an upright position.Store batteries on a solid surface that can safely accomodate their weight. Batteries can be safely stocked two or three layers high by using a secure stacking surface placed between each layer. When stacking batteries in layers, take care to secure battery terminals against short-circuit and to block and brace batteries that prevents any movement of the battery group. Please note that batteries need periodic stock rotation and service charging to ensure peak performance. |
A = | Automotive / SAE Top Terminal |
---|---|
D = | Standard Terminal (Dualo Automotive / Stainless Threaded Terminal) |
F = | Commercial Threaded Stud Terminal |
G = | Refer to Terminal Requirement Whn ordering Type A |
I = | Cover with Raised Vent |
J = | Battery Fitted with Handle or Lifting Lug |
K = | PRO eye Fluid Indicator (Option for Gr 24/27/31) |
L = | Antimony Alloy Construction: Low Maintenance Service |
6mm Solar Cable - Price is per meter simply select the quantity as the number of meters you want.
Double Insulated UV protected solar cable
Max load: 50A
35mm Cable - Use for connecting Batteries to Inverter M8 - M10 (M8 one end M10 on the other end)
You will need 2 cables, 1 for Positive and 1 for Negative
If you need a longer cable please let us know.
Fixed Key Battery Isolator Switch
High quality metal body, Durable plastic handle
300AMP continuous
1,000AMP for up to 10 seconds
Measurements
Body: 67mm Diameter, 100mm length
10mm studs
Battery Inter-connecting Cable - 35mm cable with M8 - M10 Lugs (M8 on one end M10 on the other)
Made up to size for you for connecting your batteries together.
Battery Inter-connecting Cable - 35mm cable with M10 - M10 Lugs (M10 on both ends)
Made up to size for you for connecting your batteries together.
Battery Inter-connecting Cable - 35mm cable with M8 - M8 Lugs (M8 on both ends)
Made up to size for you for connecting your batteries together.
MC4 Solar Connector - Price is per MC4 pair simply select the quantity as the number of MC4 pairs you want.
These are the standard connectors used on most solar panels.
TUV certified, brand new, water /weather proof rubber seal that can ensure excellent electrical contact for life time service.
The metal pin is made from high quality machined copper and sealed tip (compare to the cheap sheet metal pin) that can ensure excellent electrical contact for life time service.
Build in press tabs for easy disconnect, no tool is needed. 25A max load.
Wires should be crimped or soldered into the pins and care should be taken to get the correct pin into the correct connector. Once the pin is pushed into the connector it is difficult to remove without the correct tooling.
MC4 Main Technical Specification:
Maximum Current: 25A
Maximum voltage: 1000V
Contact resistance:≤5mmΩ
Maximum operating humidity: 5% -95% (No condensation)
Temperature: -40 ℃ ~ +90 ℃
Waterproof Grade: IP67
Flame class: UL94-V0
Connecting cable specifications: 2.5mm2 4mm2 6mm2
Test voltage: 6.6KV (50Hz, 1min)
Metal materials: nickel copper
Insulation material: PA12 * 1988HB
Lock mode: Self-locking
Security Level: Class ‖
Insertion force:≤50N
Withdrawal force:≥50N
MC4 Features:
Shell has a strong anti-aging, anti- UV capability; found in outdoor use under harsh environment requirements; according to different needs can be arbitrary and used in conjunction with a variety of cell junction box; all connections are using press-fit connection;