NEW 670ah c20 (560 ah c5)  

2 VOLT, DEEP CYCLE WITH TUBULAR POSITIVE PLATE, 1500 CYCLE LIFE  EXPECTANCY TO 80% d.o.d

198mm x 83mm x 694.5mm height,  32.6kg wet

Charge Voltage Settings

Bulk/Absorb 2.40v per cell
Float 2.23v per cell
EQ 2.47v per cell

The Sunny Island has been installed more than 120,000 times worldwide. With the new generation, installers and PV system operators benefit from an even more user-friendly battery inverter.

The Sunny Island 6.0H is ideal for people who strive to be as independent as possible and want to be actively involved in shaping their own energy supply. This is true both for new plants and for plant operators who would like to retrofit their existing PV plants to emphasize self-consumption more. The battery inverter fits to all PV-plant sizes, PV- inverters and batterie typs. Depending on local conditions, it can also integrate other renewable energy generators into the storage system, such as small wind turbines, hydroelectric power facilities and CHP plants.

Developed from the successful SI-5048 these inverters are rated to give a power output of 6kW for 30 min. IP54 protection to allow outdoor installation if required and increased operating temperature range of -25 to +60 deg C.

Inverters can be combined together to assemble higher power systems and used with the Sunny Island Remote Control which gives a single point of operation.

Warranty period extended to 10 years

See more at: http://www.sma.de/en/products/battery-inverters.html

320W JA Solar Panels Mono Percium - All Black Half Cell, 1689 X 996 X 35mm

Half Cell Advantages

• High output power
• Less shading effect
• lower temperature coefficient
• Better mechanical loading tolerance

Supplied with 1000mm output cables and QC4.10 connectors (connects to MC4s)

Percium Cell
The latest in mono cell technology with passivated backside, local BSF and 4 Bus Bars from worldwide PV Cell leaders - JA Solar
First to reach >20.6% average cell efficiency in mass production
 
More Power Per m²
JA higher efficiency module type specially designed for UK rooftop market.
Maximise the kWp installation on the roof 
 
Aesthetics
Homogeneous Black Mono cells.
Black Frame for anti-glare and pleasing appearance.
 
Lower System Cost
Reduced installation and BOS cost
 
Excellent Low-light Performance
Enhanced spectral response at longer wavelength boosts low-light performance, which can produce more than 1% additional power compared with conventional module at system side.
 
High Reliability
Passed "3xMCS" TÜV SÜD Thresher Long life Accelerated Stress Tests.
Full range of PID-resistance tests
Harsh climate environment endurance tests
Full set of long-term reliability tests
Manufacturing inspected and certified by leading institutes such as PI-Berlin, Franhoeffer, Sgurr, OST and Solar-IF
100% in-house automatic manufacturing
2X 100% EL inspection ensuring defect-free production
Over 500MWp of JA Solar panels installed in the UK. 10GWp Worldwide.
 
Other Features
Positive power tolerance: -0~+5W
Modules binned by current to improve system performance
Excellent mechanical load resistance: Certified to withstand high wind loads (2400Pa) and snow loads (5400Pa)

Use with Tracer MPPT's - for a single panel on a 12V system you can use a 30A MPPT with this panel. 

This listing is for 1 panel, simply select how many you need in the quantity.  There is NO MINIMIUM Order.

100% EASE AND COMFORT WITH SUNNY BOY 3.0 – 5.0
More than an inverter — the new Sunny Boy 3.0-5.0 — the next generation of the globally successful Sunny Boy 3000-5000TL.

Thanks to its integrated SMA Smart Connected service, this inverter offers true ease and comfort for PV system operators and installers. The automatic inverter monitoring by SMA analyzes inverter operation, immediately informs the installer of irregularities ensuring optimum service and maximum system availability.

The Sunny Boy 3.0-5.0 is ideal for solar power generation in private homes.

EASY INSTALLATION AND COMMISSIONING
It couldn’t be any easier: A system can be designed professionally and easily with Sunny Design. And thanks to its extremely light design and intuitive user interface, the Sunny Boy can be quickly installed – without having to open the inverter.

• Simple system design with Sunny Design
• Secure plug-and-play installation without opening the inverter
• Compact and lightweight (< 16 kg)
• Quick commissioning using a tablet, smartphone or laptop

CONVENIENT AND FUTURE-PROOF
With the Sunny Boy, PV system operators and installers are always up-to-date. Additionally, thanks to current communication standards, intelligent energy management and SMA storage solutions can at any time be flexibly added to systems with the Sunny Boy.

• Future-proof communication via Ethernet and WLAN
• Automatic inverter updates
• Choose between local and online monitoring via Sunny Portal and Sunny Places
• Compatible with intelligent energy management and SMA storage solutions

6mm² Solar Cable - Price is per meter, simply select the quantity as the number of meters you want.

Double Insulated UV protected solar cable

Max load: 70A in air

Our solar cable is ozone resistant according to BS EN 50396

UV resistant according to HD 605 S2 and is tested for durability according to EN 60216

Flexible tinned copper conductor

Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black

300A Battery isolator switch, 900A for 30 secs, 48 Volt, M10

BLUE SEA E-SERIES SELETOR SWITCHES

E-SERIES BATTERY SWITCHES

300 Ampere continuous rating.

• Tin-plated copper studs for maximum conductivity and corrosion resistance
• Studs accept 3⁄8" (M10) ring terminals
• 7⁄8" (22mm) stud length accepts multiple cable terminals
• One-piece terminal stud design never loosens over time
• Case design allows surface or rear panel mounting options
• Label with international legends
• Tactile indicator conveys knob position by feel

Regulatory

• CE marked, ISO 8846
• UL Listed - UL 1107 electric power switches
• Meets ABYC requirements
• Meets UL1500 and SAE J1171 external ignition protection requirements
• IP66 protects against powerful water jets

35mm Cable - Use for connecting Batteries to Inverter M8 - M10 (M8 one end M10 on the other end)

You will need 2 cables, 1 for Positive and 1 for Negative

If you need a longer cable please let us know.

MC4 Solar Connector - Price is per MC4 pair simply select the quantity as the number of MC4 pairs you want.

These are the standard connectors used on most solar panels.

TUV certified, brand new, water /weather proof rubber seal that can ensure excellent electrical contact for life time service.
The metal pin is made from high quality machined copper and sealed tip (compare to the cheap sheet metal pin) that can ensure excellent electrical contact for life time service.
Build in press tabs for easy disconnect, no tool is needed. 25A max load.
Wires should be crimped or soldered into the pins and care should be taken to get the correct pin into the correct connector. Once the pin is pushed into the connector it is difficult to remove without the correct tooling.
 
MC4 Main Technical Specification:
Maximum Current: 25A
Maximum voltage: 1000V
Contact resistance:≤5mmΩ
Maximum operating humidity: 5% -95% (No condensation)
Temperature: -40 ℃ ~ +90 ℃
Waterproof Grade: IP67
Flame class: UL94-V0
Connecting cable specifications: 2.5mm2 4mm2 6mm2
Test voltage: 6.6KV (50Hz, 1min)
Metal materials: nickel copper
Insulation material: PA12 * 1988HB
Lock mode: Self-locking
Security Level: Class ‖
Insertion force:≤50N
Withdrawal force:≥50N
 
MC4 Features:
Shell has a strong anti-aging, anti- UV capability; found in outdoor use under harsh environment requirements; according to different needs can be arbitrary and used in conjunction with a variety of cell junction box; all connections are using press-fit connection;

Battery Inter-connecting Cable - 35mm cable with M10 - M10 Lugs (M10 on both ends)

Made up to size for you for connecting your batteries together.

A small, low cost multimeter supplied with test leads, perfect to help you setup and test your solar installation.

• AC/DC voltage measurement
• DC current
• Resistance measurement (20R to 2MR)
• Diode and transistor tester
• Low battery indication
• Requires a 9V PP3 battery

DMM Functions: DC Current, AC/DC Voltage, Diode, Resistance  
No. of Digits: 3.5  
DMM Response Type: Average  
Display Count: 1999  
Range Selection: Manual  
Voltage Measure DC Max: 500V  
Voltage Measure AC Max: 500V  
Current Measure DC Max: 5A  
Resistance Measure Max: 2Mohm