Ideal for glamping tents or structures that need simple lighting and USB sockets.
Use the LOAD OUT of the controller to keep the battery happy by running lights and USBs from the controller, which you can set to switch off at 12.0v and keep your batteries happy and your guests from killing your battery!
Use some of the 6mm solar cable to wire from the controller to the USB socket.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
MPPT: Ultra Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remote Monitoring and Control
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.
Victron 90W Mono Solar Panel
90W power, great for smaller applications and lighting. These are 12V panels so you can use with PWM controllers to make a very cheap system.
Size: 780 x 668 x 30mm, please see the downloads tab for full specification.
This panel has pre punched mounting holes on the rear frame. The holes are on the longest end at 18cm in from each end so two holes on each long side.
• Low voltage-temperature coefficient enhances high-temperature operation.
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• 25-Year limited warranty on power output and performance.
• 5-Year Limited warranty on materials and workmanship.
• Sealed, waterproof, multifunctional junction box gives high level of safety.
• High performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• Pre wired quick-connect system with PV-ST01 connectors.
As these are small panels we use standard couriers - delivery is cheaper.
Or you can collect for FREE from Near Brighton, East Sussex
36Ah AGM Battery
REC PREMIUM CYCLIC
The REC range of batteries for cyclic applications, including Golf and Mobility. The low maintenance and valve regulated construction combine with heavy duty plates and innovative separator systems to make the REC range a premium high reliability cyclic battery.
• Double the cyclic life of conventional VRLA (Valve Regulated Lead Acid) batteries.
• Electrolyte suspension AGM (Absorbed Glass Mat) technology ensures no free electrolyte.
• Lead calcium grids for extended life.
• Multipurpose: float or cyclic use.
• Long shelf life.
This battery has M5 size female threaded terminals and comes with bolts.
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Class 5 flexible tinned copper conductor
Halogen-free cross-linked compound
Halogen-free cross-linked, flame retardant compound
Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link
Wire size range: 6mm2
Set of 4 Aluminium mounting brackets for mounting solar panels on vans, boats, sheds or a wooden frame as a easy cheap solar framing system.
** Panels larger than 100w are not recommended to use these alone, as a direct fixing to a vehicle roof. We suggest a bespoke solution using bolts, some of our customers use these brackets and modify them to achieve this, others get a locally fabricated solution **
Aluminium mounting brackets;
Wood screws:St5.7 mm*30mm,
Socket Head Screw:M6*25mm,
6mm cable - Charge Controller to Batteries - 1 Meter with M8 - to bare wire
You will need 2 cables per charge controler (Pos & Neg).
12V Dual USB socket, slim surface mount, simply screw to the wall!
Net Weight: Approx.42g/1.5oz
Working Temperature: -25°C -80°C
Maximum Power: 16W
Input Voltage: DC10V-23V
USB Output Voltage: 5V
USB Output Current: 3.1A
12V LED Fairy Lights - 10m string, coper wire that can be bent into any shape!
Durable and heat-resistant copper wire.
Flexible copper wire can easily string up how you want (don't bend tightly).
Can last for 50000+ hours! If one light goes out the rest remain lit!
Please Note: When installing do not trap the wires between objects that could crush the cables, and do not wrap tightly around screws or nails, this can brake the wires and then cause the lights to short out.
LED Quantity: 100LEDs
Connector: 2.1mm barrel socket
Light colour: warm white
Wire color: Copper
Modes: Steady on
12V Edison COB Filament Globe Light E27 Screw In 4W Warm White Light Bulb - replaces 50W Incandescent Bulb
Voltage: AC/DC 12-36V
HAR approved. Flat flexible cable with white PVC insulation for indoor applications. Copper conductor. BS 6500.
E27 Simple Holder Light Socket Fitting - can use for 12V or 240V
Material: Iron + Ceramic
Maximum current: 4A
Maximum voltage: 230V
Maximum overload capacity: 660W
Suit for bulb diameter: 25mm
Diameter of adapter: 9.6mm
Miniature Chrome Toggle Switch - Surface mount for 12V Lighting
· Surface mount, miniature single pole, single throw toggle switch.
· Connections made by screw terminals on base.
· Suitable for low voltage applications only
Maximum Voltage : 12V
Maximum Current : 3A
Connection Type : Screw Terminal
Base Diameter : Æ 28mm
Fixing Centres : 20mm
Fixing Hole Dia. : 2.8mm
Body Height : 15mm
12V Frosted Edison COB Light E27 Screw In 3W Warm White Light Bulb - replaces 50W Incandescent Bulb
Type: 6SMD 3W COB White Cover
Color: Warm White
Voltage: 9V-30V DC
Gross Weight: 35g
These little connectors are fantastic, they make wiring so easy, simply put the wires together and then twist the connector over the bare ends. Works for up to 6mm cables to join 2 x 6mm cables together.
Swept-wing design for comfort
Live-action, square-wire spring
Hexagonal shape for standard nutdriver
No pre-twisting required and is fully re-useable
Accept solid, stranded and flexible wires
UL Listed and CSA Certified
Shell rated for 105°C
Rated at 41A/600V