Brand New 85Ah Sealed Vented Lead Acid Battery

The Technology – Sterling’s high integrity Valve Regulated Lead Acid (VRLA) batteries operate as a starved electrolyte system.  The electrolyte is limited to the amount that either is absorbed in the battery plates or wets the fibres in the separator.  The resulting system allows gases produced during overcharge to diffuse from one plate to the other and to be recombined back into the electrolyte.

This recombination creates a closed system, thus reducing the release of gases into the atmosphere under normal discharge conditions.

Since the electrolyte is recycled, there is no need to add water to the batteries.  This reduced maintenance leads to a longer life battery in a clean and compact container that can be installed when flooded batteries are impractical.

Features & Benefits

• Tank formed construction allows for individual plates to be inspected prior to battery assembly, eliminating manufacturing defects.  Plates are fully formed guaranteeing 100% capacity on delivery.

• Sterling’s unique construction and sealing techniques ensures no electrolyte leakage from case or terminals, allowing batteries to be positioned on their side.

• Excellent recovery from deep discharge.

• Low self discharge – approx 3% per month.

• Not restricted for air transport – complies with IATA ICAO special provision A67.

• Impact resistant ABS case and cover.

• Industry standard footprints for easy field replacement.

• Maintenance free.

• 98% recyclable.

Charging: (25°C / 77°F)
Standby use: Float charging voltage 13.50V to 13.80V.

Top up charge: Product in storage (ambient temperature) requires a top up charge every 6 months.  Apply constant voltage at 2.40 volts per cell, initial charging current should be set at less than 0.1 CA for 15 to 20 hours.

Comes with bolts.

Bimble Solar 120W Mono Panel

120W power, great for smaller applications and lighting.  These are 12V panels so you can use with PWM controllers to make a very cheap system.

Size: 860 x 700 x 25mm

MC4 ended premade solar cables are 60cm long each

Highlights

• 12V, suitable for charging batteries via PWM or MPPT charge controllers
• Monocrystalline
• Widely using of the most popular and mature type of modules for off-grid system.
• Leading manufacturing technology in PV industry, strictly controlling the quality of raw materials and the process of producing
• 100% EL inspection, ensures modules are defects free.
• Cells binned by current to improve module performance
• Anti reflective glass. Not only to increase the light absorption, but also to make the module has the function of self-cleaning in water environment, effectively reducing the power loss caused by dust.
• Outstanding performance in low-light irradiance environments.
• Excellent mechanical load resistance:Certified to withstand high wind loads(2400pa) and snow loads(5400pa).
• High salt and ammonia resistance
• Positive power tolerance:0-+5w
• Junction Box with cables and MC4 Connectors

Certificates

• SGS-TUV Certificate
• PID free Testing Certificate
• Salt-Mist Testing Certificate
• Ammonia-Corrosion Testing Certificate
• Fire Testing Certificate
• CQC Certificate
• IEC61215、IEC61730 Certificate
• ISO 9001:2008:Quality managent systems
• CE Certificate

Warranty

• 10 years product warranty
• 10-years 90% of Min. rated output power,and 25-years 80% of Min. rated output power warranty

We have packages for both off grid solar panel systems and on grid Installations. (see other listings)

Delivery

As these are small panels we use standard couriers - delivery is cheaper.

Or you can collect for FREE from Near Brighton, East Sussex

20A PWM EPever Solar Charge Controller with Dual USB ports and LCD display VS2024AU

The VS-AU controller is a common positive PWM charge controller with built in LCD display and USB port.The multiple load control modes enable it can be widely used on solar home system, traffic signal, solar street light, solar garden lamp, etc. 

Product Highlights

• Series PWM charging mode
• Full power working at working temperature range
• Multiple load control modes
• Adopt high quality, high-reliability international components brand
• Double USB design
• Segment LCD display design
• Real time energy statistics function
• Extensive electronic protection

One pole DIN rail mount fuse holder for 10 X 38 type fuses, suitable for protecting and isolating solar panel strings between the array and the charge controller input for example.

Rated to 1000VDC, 32A, accepts up to 16mm² cable. For use stand alone or for incorporation into a PV combiner Box with the 13 way bus bar and feeder terminal to take off  the supply to a solar charge controller or solar inverter.

Choose fuse separately

Item dimensions 75mm H X 16mm W X 55mm D

Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.

(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)

Double Insulated UV protected solar cable

Max load: 70A in air

Our solar cable is ozone resistant according to BS EN 50396

UV resistant according to HD 605 S2 and is tested for durability according to EN 60216

Flexible tinned copper conductor

Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black

Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link

Wire size range: 6mm2

6 way mains extention cable with 2 usb Ports.  Great for wiring from your inverter.

• 2x USB charging ports
• LED indicator
• USB ports rated at 2.4A, 5V
• BS1363/A and BS5733/A Compliant
• No. of Outlets: 5
• Outlets Outlet Type: UK 
• Current Rating: 13A 
• Supply Voltage V AC: 240V 
• Plug Type: UK 
• Cable Length: 2m

Protect your off-grid or grid tied PV system from unexpected string faults using Mersen’s HelioProtection® fuse line

Developed specifically for the protection of PV string wiring for 1000VDC industrial rooftop and utility scale photovoltaic systems. Its robust construction makes it ideal for continuous temperature and current cycling withstand adding to system longevity. The 1000VDC rated fuse is designed for low minimum breaking capacity capabilities of 1.35 times the fuse rated current value, allows for safe circuit interruption under typical low fault current conditions produced by PV arrays.

The 10 X 38mm fuse can be used standalone with the DIN mount string fuse holder to fuse a single circuit or as a bank of fuses in a solar combiner box.

This item fits String Fuse holder

A clip-on lampholder with a 13A plug (with 5A fuse) and 2m lead.

NOT waterproof

OPTIONAL EXTRAS ARE REQUIRED, SEE RELATED ITEMS

12V LED Fairy Lights - 10m string, coper wire that can be bent into any shape!

Specification

Durable and heat-resistant copper wire.
Flexible copper wire can easily string up how you want (don't bend tightly).
Can last for 50000+ hours! If one light goes out the rest remain lit!

Please Note: When installing do not trap the wires between objects that could crush the cables, and do not wrap tightly around screws or nails, this can brake the wires and then cause the lights to short out.

LED Quantity: 100LEDs
Chips:3014 SMD
Length: 10meter
Power: DC12V
Connector: 2.1mm barrel socket
Max 6w

Light colour: warm white
Wire color: Copper
Modes: Steady on

Protect your off-grid or grid connected PV system from unexpected string faults using Mersen’s HelioProtection® fuse line

Developed specifically for the protection of PV string wiring for 1000VDC industrial rooftop and utility scale photovoltaic systems. Its robust construction makes it ideal for continuous temperature and current cycling withstand adding to system longevity. The 1000VDC rated fuse is designed for low minimum breaking capacity capabilities of 1.35 times the fuse rated current value, allows for safe circuit interruption under typical low fault current conditions produced by PV arrays.

The 10 X 38mm fuse can be used standalone with the DIN mount string fuse holder to fuse a single circuit or as a bank of fuses in a solar combiner box.

This item fits String Fuse holder

• Universal USB to DC Charge Cable,8 Connectors Adapter for Bluetooth Speaker,HUB Splitter,Mini fans,DJ Controller, LED Lights, Electronic Devices Routers Speakers,LCD,CCTV Cameras,TV Box,Webcam Router,Toy.
• Type A Male USB plug to 5.5mm(outer), 2.1mm (inner) .With 8 connetors 6.4*4.4mm/ 6.3*3.0mm/ 5.5*2.5mm/ 5.5*2.1mm/ 5.5*1.7mm/ 4.8*1.7mm/ 4.0*1.7mm/ 3.5*1.35mm.Convenient Use and Portability.
• DC 5V USB cord Max for 2A device.DC Tip Polarity: Inner Positive(+), Outer Negative(-).Below 2A and Max for 8Watts device.
• 8 Connectors Adapter USB to DC Power Cable is 1.2M, USB 5V to DC 12V Converter Power Cable is 1M

A small, low cost multimeter supplied with test leads and holster.

• 3½ digit, 1999 count display
• AC/DC voltage measurement
• DC current
• Resistance measurement (20R to 2MR)
• Diode, continuity and transistor tester
• Square wave output
• Low battery indication
• Requires a 9V PP3 battery (included)

DMM Functions: DC Current, AC/DC Voltage, Continuity, Diode, Resistance, Transistor
No. of Digits: 3.5  
DMM Response Type: Average  
Display Count: 1999  
Range Selection: Manual  
Voltage Measure DC Max: 500V  
Voltage Measure AC Max: 500V  
Current Measure DC Max: 5A  
Resistance Measure Max: 2Mohm  

M6 Bolt set for batteries

2 x M6 Hexagon Bolts

2 x M6 Hexagon Nuts

4 x M6 large penny washers 12mm