Bimble Solar 120W Mono Panel

120W power, great for smaller applications and lighting.  These are 12V panels so you can use with PWM controllers to make a very cheap system.

Size: 860 x 700 x 25mm

MC4 ended premade solar cables are 60cm long each

Highlights

• 12V, suitable for charging batteries via PWM or MPPT charge controllers
• Monocrystalline
• Widely using of the most popular and mature type of modules for off-grid system.
• Leading manufacturing technology in PV industry, strictly controlling the quality of raw materials and the process of producing
• 100% EL inspection, ensures modules are defects free.
• Cells binned by current to improve module performance
• Anti reflective glass. Not only to increase the light absorption, but also to make the module has the function of self-cleaning in water environment, effectively reducing the power loss caused by dust.
• Outstanding performance in low-light irradiance environments.
• Excellent mechanical load resistance:Certified to withstand high wind loads(2400pa) and snow loads(5400pa).
• High salt and ammonia resistance
• Positive power tolerance:0-+5w
• Junction Box with cables and MC4 Connectors

Certificates

• SGS-TUV Certificate
• PID free Testing Certificate
• Salt-Mist Testing Certificate
• Ammonia-Corrosion Testing Certificate
• Fire Testing Certificate
• CQC Certificate
• IEC61215、IEC61730 Certificate
• ISO 9001:2008:Quality managent systems
• CE Certificate

Warranty

• 10 years product warranty
• 10-years 90% of Min. rated output power,and 25-years 80% of Min. rated output power warranty

We have packages for both off grid solar panel systems and on grid Installations. (see other listings)

Delivery

As these are small panels we use standard couriers - delivery is cheaper.

Or you can collect for FREE from Near Brighton, East Sussex

BlueSolar PWM DUO-LCD&USB

• Liquid Crystal Display
• Two 5 Volt USB outputs
• Lighting control function, fully programmable  
• Three stage battery charging (bulk, absorption, float), fully programmable
• Load output with low voltage and manual disconnect (programmable)
• Load output protected against over load and short circuit
• Protected against reverse polarity connection of the solar panels and/or battery
• Charges two separate batteries
• Programmable charge current ratio
• External Temperature sensor 

Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.

(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)

Double Insulated UV protected solar cable

Max load: 70A in air

Our solar cable is ozone resistant according to BS EN 50396

UV resistant according to HD 605 S2 and is tested for durability according to EN 60216

Flexible tinned copper conductor

Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black

Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link

Wire size range: 6mm2

Ideally 6mm solar cable max - for bigger units with bigger cable click here

Unit best used for housing 1 x AC RCBos, string fuse holders and fuses up to 32a as opposed to DC Din Mount breakers.

Best practice would be to use this unit with no bigger than 6mm square cable and appropriately sized breakers if you are using it with glands for a water tight fit.  If you are using it in an environment that is already dry and dust free the use of glands may not be necessary.

This is an empty unit, you must add the breakers you need to your cart as well, see related items tab above to see the breakers that fit.  

You will also need suitable cable entry glands - please see related products tab.

Affordable DC Breaker for 35mm DIN mount.  Use with our DIN Rail as an easy and affordable breaker solution.

Current Flows from top to bottom of the breaker: 
For charge controller wire top pole to charge controller and bottom pole to battery. 
For Inverter wire top pole to battery and bottom pole to inverter.

STÄUBLI MC4 Solar PV connectors - Pair of Y Branches

Connect your solar modules together with ease using these safe and durable MC4 connectors.  This pair of "Y" shape connectors (one in a male to female, female configuration, and one in a female to male, male configuration) will allow you to connect panels or strings of panels together.  If you need to connect 3 panels together then it is cheaper to use 2 pairs of these than to purchase a 3 way splitter (its about 1/3 of the cost to use these)

Product information: