10mm cable advised by manufacturer: CLICK HERE FOR LINK TO 10MM CABLE
This fridge comes with loose cable and requires connecting via chockblock or similar. We use the 10mm friendly Grey Twisters:
https://www.bimblesolar.com/342twister-connector and a 15a fuse for 12v systems or 10a fuse for 24V systems.
Stock up on your weekly groceries with the 12v Essentials Larder Fridge. Compact, but spacious inside, it has plenty of storage space across 2 adjustable shelves, 3 door balconies and a salad crisper.
It fits neatly under your kitchen counter, making it a great option for smaller households and shared spaces.
You can also reverse the door if needed, so you can fit it into any space.
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
MPPT: Ultra Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remote Monitoring and Control
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet with a GX device, the Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both VictronConnect and VRM are free to use. For remote installations - even when there is no internet connection nearby - you may be able to monitor your MPPT by connecting the GlobalLink 520.
Comes with tapered automotive style battery posts. Consider adding https://www.bimblesolar.com/battery-terminals-m8-pair in order to terminate cables.
Please Note: The Varta LFD range are a sealed maintenance free battery. However they are a flooded (wet) lead acid battery and like other sealed batteries such as AGM they have a vent valve. Therefore if the battery was accidentality tipped on its side or punctured it would leak dilute sulphuric acid out.
Patent protected Q.Antum passivated emitter rear contact (PERC) technology, 132 (half) cell format with zero gap cell layout, boosts module efficiency up to 20.8%
Optimal yields, whatever the weather with excellent low-light and temperature behaviour.
Long-term yield security with Anti LID Technology, Anti PID Technology1, Hot-Spot Protect and Traceable Quality Tra.Q™.
Extreme weather rating. High-tech aluminium alloy frame, certified for high snow (6000Pa) and wind loads (4000Pa).
Includes 12-year product warranty and 25-year linear performance warranty
Q.ANTUM DUO combines cutting edge cell separation and innovative wiring with Q.ANTUM technology
Please Note: Q Cells do not recommend their modules to be fitted on In-Roof mounting systems like the GSE In-Roof system
Long Aluminium Mounting Brackets - Stick down on Boats - Rivet down on vans
Use one pair for up to 100w panels and 2 pairs larger panels
Foot print (550mm long, 75mm wide)
Rivet plate 25mm
Panel ledge 30mm
A handy kit for your 12V wiring, an affordable solution using blade fuses
|Earth block 4 way|
|Blade fuse box 4way|
|Cable 4mm x 10m|
|Switches x 2|
|Spades x 4|
6mm cable - Charge Controller to Batteries - 5 Meter with M8 - to bare wire
You will need 2 cables per charge controler (Pos & Neg).
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Class 5 flexible tinned copper conductor
Halogen-free cross-linked compound
Halogen-free cross-linked, flame retardant compound
Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link
Wire size range: 6mm2
10mm cable - Charge Controller to Batteries - 2 Meter with M8 Lug
You will need 2 cables per charge controler (Pos & Neg). The Lugs are on 1 end only as the charge controllers have bare wire connectors.
If you need longer please let us know
Cable Gland Entry Box, use to connect through external surface. Perfect for solar panel cables coming from outside to controller.
This comes with a cradle for keeping your MC4 connectors in place and tidy.
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
A small, low cost multimeter supplied with test leads and holster.
DMM Functions: DC Current, AC/DC Voltage, Continuity, Diode, Resistance, Transistor
No. of Digits: 3.5
DMM Response Type: Average
Display Count: 1999
Range Selection: Manual
Voltage Measure DC Max: 500V
Voltage Measure AC Max: 500V
Current Measure DC Max: 5A
Resistance Measure Max: 2Mohm
Simple DIN mount rail 10cm long for DC or AC DIN mount breakers. Easy solution, simply screw the rail to the wall of your electrical installation and connect the breakers to it. Quick easy and simple solution to install breakers to your solar system.
Use with our: