Charge your Electric Vehicle from Solar. This kit in an on grid kit designed for charging your car during the day. The car port will provide most of the power to charge the car on good sunny days with the rest being provided by the grid.
IRFTS Shadow Solar mounting frames are compatible with all types of 60 cells - 6" PV modules fitted in a landscape orientation, and can be used for ground or wall mounted installations. It is also compatible with optimisers and micro-inverters.
The well-designed configuration is a watertight solution that allows a high level of ventilation to maximise the efficiency of the PV installation and is the most solution currently available on the market.
Ideal for energy production and sun protection, the mounting structure has a range of applications for residential, commercial, public, agricultural and industrial building such as a carport, canopy, patio awning, lobby entrance, bike shelter etc.
The anthracite grey aluminium profile includes a rainwater harvesting network, under-panel protection and optional panel side flashing. The structure also allows modules to be fitted easily from underneath, reducing H&S risks with installation.
View the installation video.
Frequently asked questions...
What size modules will fit?
60 Cell modules within dimensions below
Length 1635mm to 1676mm
Width 986mm to 1001mm
Depth 30mm to 46mm
What is the roof pitch of the carport?
Pitch is 5 degrees
NOTE – Please check with the module manufacturers installation manual that your chosen panel can be installed at this inclination.
How is it fixed to the ground?
Each leg will need to be buried in to concrete footings to secure to the ground
Please ensure you adhere to the manufacturers installation instructions
Do you need to inform planning or building control?
This can vary according to area so always check with the local departments to ensure compliance
Are there any additional options?
We sell additional flashing covers for the sides of the modules (not the carport) which are available at an extra cost
Download the datasheet from the IRFTS website for full product details.
325W JA Solar Panels Mono Percium - All Black Half Cell, 1689 X 996 X 35mm
Half Cell Advantages
Supplied with 1000mm output cables and QC4.10 connectors (connects to MC4s)
Percium Cell
The latest in mono cell technology with passivated backside, local BSF and 4 Bus Bars from worldwide PV Cell leaders - JA Solar
First to reach >20.6% average cell efficiency in mass production
More Power Per m²
JA higher efficiency module type specially designed for UK rooftop market.
Maximise the kWp installation on the roof
Aesthetics
Homogeneous Black Mono cells.
Black Frame for anti-glare and pleasing appearance.
Lower System Cost
Reduced installation and BOS cost
Excellent Low-light Performance
Enhanced spectral response at longer wavelength boosts low-light performance, which can produce more than 1% additional power compared with conventional module at system side.
High Reliability
Passed "3xMCS" TÜV SÜD Thresher Long life Accelerated Stress Tests.
Full range of PID-resistance tests
Harsh climate environment endurance tests
Full set of long-term reliability tests
Manufacturing inspected and certified by leading institutes such as PI-Berlin, Franhoeffer, Sgurr, OST and Solar-IF
100% in-house automatic manufacturing
2X 100% EL inspection ensuring defect-free production
Over 500MWp of JA Solar panels installed in the UK. 10GWp Worldwide.
Other Features
Positive power tolerance: -0~+5W
Modules binned by current to improve system performance
Excellent mechanical load resistance: Certified to withstand high wind loads (2400Pa) and snow loads (5400Pa)
Use with Tracer MPPT's - for a single panel on a 12V system you can use a 30A MPPT with this panel.
This listing is for 1 panel, simply select how many you need in the quantity. There is NO MINIMIUM Order.
The new V2 model is BS 7671 18th Edition ready and comes with integrated RCD and Earth fault detection. This eliminates the need to install an expensive Type B RCD or an earth electrode.
Zappi works like any regular charging point but has special eco charging modes which will benefit homeowners with grid-tied microgeneration systems.
The ECO+ charging mode will automatically adjust the charging rate to only make use of surplus power that would otherwise be exported from the property - which means that charging your car is effectively completely free!
The ECO mode is similar, but allows you to specify a minimum that should be put into the car by a particular time, in order to minimise use of imported power but still ensure you have sufficient charge to use the car.
In FAST charge mode, zappi operates like any ordinary EV charging station.
Zappi is a Mode 3 charging station, compatible with all electric vehicles that comply with SAE J1772, EN62196 and EN61851 plug-in electric vehicle standards.
If installing under the OLEV scheme, the myenergi hub is also required.
Features
6mm² Solar Cable - Price is per meter, simply select the quantity as the number of meters you want.
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black
STÄUBLI MC4 Solar PV connectors - Pair
Connect your solar modules together with ease using these safe and durable genuine Staubli MC4 connectors. Snap-in lock. MC4 crimp tool required to make onto cable ends. https://www.youtube.com/watch?v=qjIdrBsim5s
Suitable for 4mm² and 6mm² solar cable with an outside diameter of 5.9 - 8.8mm, Part number: 32.0017P2000-UR & 32.0016P2000-UR
Product information:
Technical data | |
Connector system | Ø 4 mm |
Rated voltage | 1500 V DC (UL) 1000V DC (IEC) |
Rated current | 39 A 4/6mm cable |
Rated impulse voltage | 12 kV |
Ambient temperature range | -40 °C...+85 °C (TUV) |
Upper limiting temperature | 105 °C (TUV) |
Degree of protection, mated unmated | IP65 1hr IP68 1min |
Overvoltage category/Pollution degree | CATIII / 3 |
Contact resistance of plug connectors | ≤0.25 mΩ |
Safety class | 1000 V DC: II |
Contact system | MULTILAM |
Contact material | Copper, tin plated |
Insulation material | PC |
Locking system (UL) | Locking type |
Flame class | UL94-V0 |
UL recognized component, in accordance with UL 6703 |
|
*Please note male and female refers ot the metal conductor and not the plastic insulator*