High Efficiency Poly PERC Half-Cell Module (CS3K-285-290-295-305P)   Dimensions: 1675 × 992 × 40mm CANADIAN SOLAR INC.is committed to providing high quality solar products, solar system solutions and services to customers around the world. As a leading PV project developer and manufacturer of solar modules with about 30 GW deployed around the world since 2001, Canadian Solar Inc. is one of the most bankable solar companies worldwide. With proprietary poly wafer and cell technologies Canadian Solar have developed an extraordinary module range. HiKu are the first poly PERC modules with up to 335W output from an almost standard 60 cell module frame size. Combining the best technology and design, it also reduces LCOE and installation costs. With Canadian Solar’s industry leading poly-PERC cell technology and the innovative LIC (Low Internal Current) module technology, we are now able to offer our global customers high power poly percium modules up to 300 W. The KuPower poly modules with a dimension of 1675 ˣ 992 mm, close to our 60 cell modules, have the following unique features: Higher power classes for equivalent module sizes High module efficiency up to 18.11 % LOW hot spot temperature risk LOW temperature coefficient (Pmax): -0.39 % / °C LOW NMOT (Nominal Module Operating Temperature): 43 ± 2 °C Power Range: up to 305 W Cell: 120 x dual-cell Percium Poly, 156 x 78 mm Dimensions: 1675 × 992 × 40 mm Weight: 18.5 kg

Super High Efficiency Poly PERC Module (CS3L-320-325-330-335P)   Dimensions: 1765 X 1048 X 40mm CANADIAN SOLAR INC.is committed to providing high quality solar products, solar system solutions and services to customers around the world. As a leading PV project developer and manufacturer of solar modules with about 30 GW deployed around the world since 2001, Canadian Solar Inc. is one of the most bankable solar companies worldwide. With proprietary poly wafer and cell technologies Canadian Solar have developed an extraordinary module range. HiKu are the first poly PERC modules with up to 335W output from an almost standard 60 cell module frame size. Combining the best technology and design, it also reduces LCOE and installation costs. The Super High Power HiKu poly modules with dimensions of 1765 x 1048 mm, have the following unique features: MORE RELIABLE (THANKS TO HALF CUT CELL TECHNOLOGY): 24 % more power than conventional modules Innovative module design, better shading tolerance Lower internal current, lower hot spot temperature Cell crack risk limited to smaller area of the cell Innovative symmetrical module design means better shading tolerance Heavy snow load up to 5400Pa and increased wind load up to 3600Pa Cell: 120 x dual-cell Poly, 156 x 78 mm Dimensions: 1765 x 1048 x 40 mm Weight: 20.6 kg Download Spec Sheet

325W JA Solar Panels Mono Percium - All Black Half Cell, 1689 X 996 X 35mm Half Cell Advantages High output power Less shading effect lower temperature coefficient Better mechanical loading tolerance Supplied with 1000mm output cables and QC4.10 connectors (connects to MC4s) Percium Cell The latest in mono cell technology with passivated backside, local BSF and 4 Bus Bars from worldwide PV Cell leaders - JA Solar First to reach >20.6% average cell efficiency in mass production   More Power Per m² JA higher efficiency module type specially designed for UK rooftop market. Maximise the kWp installation on the roof    Aesthetics Homogeneous Black Mono cells. Black Frame for anti-glare and pleasing appearance.   Lower System Cost Reduced installation and BOS cost   Excellent Low-light Performance Enhanced spectral response at longer wavelength boosts low-light performance, which can produce more than 1% additional power compared with conventional module at system side.   High Reliability Passed "3xMCS" TÜV SÜD Thresher Long life Accelerated Stress Tests. Full range of PID-resistance tests Harsh climate environment endurance tests Full set of long-term reliability tests Manufacturing inspected and certified by leading institutes such as PI-Berlin, Franhoeffer, Sgurr, OST and Solar-IF 100% in-house automatic manufacturing 2X 100% EL inspection ensuring defect-free production Over 500MWp of JA Solar panels installed in the UK. 10GWp Worldwide.   Other Features Positive power tolerance: -0~+5W Modules binned by current to improve system performance Excellent mechanical load resistance: Certified to withstand high wind loads (2400Pa) and snow loads (5400Pa) Use with Tracer MPPT's - for a single panel on a 12V system you can use a 30A MPPT with this panel.  This listing is for 1 panel, simply select how many you need in the quantity.  There is NO MINIMIUM Order.

Super High Efficiency Mono PERC Module (CS3L-365MS)   Dimensions: 1765 X 1048 X 40mm CANADIAN SOLAR INC.is committed to providing high quality solar products, solar system solutions and services to customers around the world. As a leading PV project developer and manufacturer of solar modules with about 30 GW deployed around the world since 2001, Canadian Solar Inc. is one of the most bankable solar companies worldwide. With proprietary mono wafer and cell technologies Canadian Solar have developed an extraordinary module rage. Combining the best technology and design, it also reduces LCOE and installation costs. The Super High HiKu mono modules with dimensions of 1765 x 1048 x 40mm, have the following unique features: MORE RELIABLE (THANKS TO HALF CUT CELL TECHNOLOGY): Lower internal current, lower hot spot temperature Cell crack risk limited to smaller area of the cell Innovative symmetrical module design means better shading tolerance Heavy snow load up to 5400Pa and increased wind load up to 3600Pa Cell: 120 x dual-cell Mono, 156 x 78 mm Dimensions: 1765 x 1048 x 40 mm Weight: 21.1 kg

These panels have a glass back sheet so they absorb sun which bounces back from behind the panel.  Great for low light and cloudy conditions. These are ideally suited to boats with a white roof as you can see gains of upto 26% from the reflection of light back from the white surface making the panel 504W.  Any surface will work, but white gives you the best refraction of light back to the panel, or you can add aluminium solar reflective paint on the roof under the panel to get the best gain. If using this panel with MPPT you should calculate this panel as 520W so that you do no overload the MPPT.  Tracer MPPT's have current limiting so it doesn't matter if you go over the rated amps, but Outback will be damaged by too much power. The LG NeON® 2 BiFacial is designed to absorb irradiance not only from the front but also the rear of its NeON® cell by using a trans­parent back sheet. The dual face of the cell allows for higher energy generation. Thanks to a combination of highly efficient bifacial n-type NeON® cells with Cello technology, which replaces traditional 4 or 5 busbars with 12 thin wires, LG NeON® 2 BiFacial modules can achieve up to 30% more energy than standard PV module. Features Enhanced Performance Warranty LG NeON® 2 BiFacial has an enhanced performance warranty. LG NeON® 2 BiFacial is guaranteed at least 86% of initial performance after 25 years. Bifacial Energy Yield LG NeON® 2 BiFacial modules use highly efficient bifacial solar cell with Cello technology..Through the Cello technology, LG NeON® 2 BiFacial can achieve up to 30% more energy than monofacial modules (under optimal conditions) Better Performance on a Sunny Day LG NeON® 2 BiFacial now performs better on sunny days thanks to its improved temperature coefficient. More Generation on a Cloudy Day LG NeON® 2 BiFacial gives good performance even on a cloudy day due to its low energy reduction in weak sunlight. BOS (Balance Of System) Saving LG NeON® 2 BiFacial can reduce the total num­ber of strings due to its high module efficiency resulting in a more cost effective and efficient solar power system. Near Zero LID (Light Induced Degradation) The n-type cells used in LG NeON® 2 BiFacial have almost no boron, which may cause the initial efficiency to drop, leading to less LID. Download Specsheet   This listing is for 1 panel, simply select how many you need in the quantity.  There is NO MINIMIUM Order. Delivery from £24+vat First panel £24+vat, each additional panel just £6+vat delivery ie: 3 panels costs £36+vat delivery. Delivery service is an economy service that hand delivers fragile items on a weekly round across the UK. Surcharge for remote areas including parts of Wales, Scotland, Ireland and Isle of Wight, please see Delivery info This is a safer more reliable and cheaper way for you to receive panels and saves on the huge amounts of wasted packing materials. Pallet Shipping 25 panels per pallet: £175 UK Mainland £375 Rest of Europe Or you can collect for FREE from Nr Brighton.

Made with Sunpower E20 super high effeciency cells, and designed to be stuck down, these are great for vans, campers and boats.  They are light weight at just 3.1Kg each and you can just stick to your roof even if curved with CT1 which we have here. We can ship this panels worldwide.  As they are not glass panels, so we can ship with standard couriers at affordable rates. Specification Solar cell: Sunpower E20 A grade Cells Cells size (mm):125 x 125 Cells per module: 4 x 11 Module size (mm): 1460 x 540 x 3mm Power tolerance: +/-3% Nominal peak power(WP): 150 Nominal voltage(V): 25.52 Nominal current (A): 5.97 Open circuit voltage (Voc): 30.11 Short cirsuit current(Isc): 6.32 Cell Conversion efficiency: 22.60% Operating temperature: -40 to +85°C Max system voltage: 45V DC ETFE Surface TPT Backsheet Net Weight(kg): 3.1kg Certification: CE, ROHS Junction box with 900mm cable and MC4 connectors Note: Junction box at the front of the panel We advise wiring these panels in parallel for best performance and lifetime. Manufacturers Warranty: 1 year repair/replacement of panel materials. Please note: These panels are not designed to be walked on. Delivery As theses are non-glass panels we can use standard couriers for delivery so delivery is available worldwide.

Fantastic, easy to carry, lightweight, foldable 120W 12V solar panel made with SunPower Cells with support legs Please Note: This panel does not have a charge controller included, please remember to add a suitable one.  For 1 panel on a 12V Battery you will want a 10A controller.  See related items. Great for camping, caravans, boats, or anywhere you need easy power.  Great if you don't want to install solar on your caravan or boat, you can just pop this folding panel outside when you are parked up.  You can even connect up multiple ones if you need extra power, or just keep one to use for extra power if you're running low. Cable with Anderson connector to easily plug in and unplug the panel from the outside when you want to put it away.  Comes with cable to wire to a charge controller and cable from charge controller to batteries. Great to charge up your laptop, run your sound system or to charge you caravan, boat or car battery. With stainless steel eyelets you can hang the panel anywhere you like. Made with High Performance 20% effeciency solar cells giving ultra high effeciency and keeping the panel as small and light as possible. Much thinner, smaller and lighter than framed solar panels.   Includes 3.5m cable, fuse, one pair of battery clips. Folding Size is: 440x560x20(mm) Net weight is: 2.7kg  

6v Trojan Battery T105, 225Ah Manufactured by Trojan, the market leader in quality Deep Cycle manufacturing. Consumer and trade recognised brand. Renowned quality. 6 Volt  (220Ah @ 20hr rate - 180Ah @ 5hr rate). 26kg - 264mm length x 181mm wide x 276mm high. Terminals available as M8 stud LPT. Brand Trojan Voltage 6 Volts Technology Wet Capacity (C5) 185 Ah Capacity (C10) 207 Ah Capacity (C20) 225 Ah Capacity (C100) 250 Ah Length 262 mm Width 181 mm Height inc. terms 281 mm This product has cheaper delivery to business addresses.

6V Platinum Battery PLA-T105, 225AH wet lead acid battery. Generally not suitable for mobile applications. Should not be located in living areas. Manufactured by Platinum, as an afordable model of the Trojan T105. Consumer and trade recognised brand. Renowned quality. 6 Volt  (220Ah @ 20hr rate - 180Ah @ 5hr rate). 26kg - 264mm length x 181mm wide x 276mm high. Terminals available as M8 stud LPT. Brand Platinum Voltage 6 Volts Technology Wet Capacity (C5) 185 Ah Capacity (C10) 207 Ah Capacity (C20) 225 Ah Capacity (C100) 250 Ah Length 260 mm Width 178 mm Height 289 mm   Download Full Spec Sheet This product has cheaper delivery to business addresses. Please Note: For some residential customers this battery maybe subsituted with an ENDUROLINE T105 BATTERY depending on your delivery location.  This is to ensure best value shipping for you.  They are both copies of the Trojan T105 and have a similar life time and performance. 

Off-Grid Inverter SPC III Feature rich all-in-one Solar Power Converter Outback have just launched their third generation all in one off grid inverter at an extremely affordable price.   Alpha & OutBack Energy’s SPC III is third generation off-grid inverter with rich new functions. Its detachable LCD control module can be turned to remote panel. It’s also integrated with Bluetooth interface ready for mobile monitoring and supports USB on-the-go function to facilitate data upload/ download. Battery independency design enhances this inverter to operate without battery connected. Output Power Factor 1 1500, 3000 and 5000 Watts Built-in MPPT Charge Controller PV Array Open Circuit Voltage up to 500VDC Up to 4000W PV Array Power Detachable LCD control module with various communications. Can be turned to remote panel. Integrated Bluetooth for mobile monitoring (Android) Supports USB On-the-Go function Reserved communication port for BMS (RS485, CAN-BUS or RS232) Replaceable fan design for ease of maintenance Battery Independence: Supply load from Grid or PV, even battery is not available Configurable AC/PV output usage timer and prioritisation Selectable high power charging current Selectable input voltage range for home appliances and personal computers Compatible to Utility Mains or generator input Auto restart while AC is recovering Cold start function Note: This unit requires a minium of 6 Solar Panels in series to function (we advise 8-12 depeding on panel) SPC III Off-Grid Inverter Models Technical Data Model SPC III 1500-24 SPC III 3000-24 SPC III 5000-48 Rated Power 1500VA/1500W 3000VA/3000W 5000VA/5000W INPUT Voltage 230VAC Selectable Voltage Range 90-280VAC Frequency Range 50/60Hz (autosensing) OUTPUT AC Voltage Regulation (Batt. Mode) 230VAC ± 5% Surge Power 3000VA 6000VA 10000VA Efficiency (Peak) 90 - 93% Transfer Time 15 ms Waveform Pure Sine Wave BATTERY Battery Voltage 24VDC 48VDC Floating Charge Voltage 27VDC 54VDC Custom Voltage Range 25-31.5VDC 48-61VDC SOLAR CHARGER & AC CHARGER   Solar Charger Type MPPT Maximum PV Array Power 2000W 4000W MPP Range @ Operating Voltage 120 - 380 VDC 120 - 450 VDC Maximum PV Array Open Circuit Voltage 400 VDC 500 VDC Maximum Solar Charge Current 60A 80A Maximum AC Charge Current 40A 60A Maximum Charge Current 60A 80A PHYSICAL Dimension (D x W x H) mm 100 x 280 x 390 115 x 300 x 400 Net weight kg 8,5 9 10 Communication Interface USB / RS232 / RS485 / Bluetooth / Dry Contact OPERATING ENVIRONMENT Humidity 5% to 95% Relative Humidity (Non-condensing) Operating Temperature -10°C to 50°C Storage Temperature - 15°C to 60°C Warranty: 2 years Note: These are a high frequency type inverter unlike the low frequency outback VFXR range. Download Full Spec Sheet Download Manual

For 12V Solar System: 750W solar panel (150V for max input voltage 138V@ 25C) For 24V Solar System: 1500W solar panel (150V for max input voltage 138V@ 25C) For 48V Solar System: 3000W solar panel (150V for max input voltage 138V@ 25C) No Fan for silent operation, great for vans, boats or any live in spaces ​The AN tracer models have a current limiting function, you can connect twice the rated power to the controller ​so if your on a budget you can use a smaller controller with more panels so that you get more power in winter or low light but don't risk overloading the controller in the summer.  The output will be limited to the max listed above. Supports upto 8 units in parallel with a PTA adapter for communication and equalize of the paralleled units Local temperature sensor included, remote 3m temperture sensor optional. Tracer AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard. MSRT can guarantee very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system; Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer AN products can rapidly track the maximum power point (MPP) of PV array to obtain the maximum energy of the panel. The limitation function of the charging power and current and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment. With the adaptive three-stage charging mode based on digital control circuit, Tracer AN series controllers can effectively prolong the life-cycle of battery and significantly improve the system performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power system. All-around electronic protections, including overcharging, over discharging, and PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for a longer service time. The isolated RS485 interface with standard MODBUS communication protocol and 5V power supply makes it easy for customer to expand the application, Support up to 8 charging in parallel to expand system and meet with different monitoring requirements, so that can be widely used for various applications, e.g. solar RV, household system and field monitoring, etc. Features CE certification(LVD EN/IEC62109,EMC EN61000-6-1/3) High quality & low failure rate components of ST and Infineon to ensure the product’s life Advanced MPPT technology & ultra-fast tracking speed is up to 99.5% guaranteed Maximum DC/DC transfer efficiency is as high as 98.7% Advanced MPPT control algorithm will minimize the MPP loss rate and loss time The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP The wider range of MPP operating voltage. Auto control system to limit the charging power & current go over the rated value. Support 4 charging options: Sealed, Gel, Flooded and User. Battery temperature compensation function Real-time energy recording and statistical function Automatic over-temperature power reduction function Hundred percent full load operation in working environment temperature range within charging & discharging Support up to 8 units in parallel to expand system Load relay control external load switch signal to realize diversified load work modes The first and the second disconnection of load control, contain two relay’s contact. Auto-control of utility and generator relay design Utility or generator auto-control relays make it easy to compose the hybrid power system The remote temperature and the voltage sensor design will collect accurate data of battery temperature and voltage Isolated RS-485 with 5VDC/200mA to protect output for no power devices with MODBUS protocol To monitor or set the parameters by using the phone Apps or PC software. Protection: PV Over Current/power • Night Reverse Charging • Battery Overheating PV Short Circuit Battery Over Voltage Controller Overheating PV Reverse Polarity Battery Over Discharge TVS High Voltage Transients Item  Tracer6415AN  Tracer10415AN  Nominal System Voltage  12/24/36/48VDCVDC or Auto  Battery Input Voltage Range  8V~68V  Battery Type  Sealed/Gel/Flooded/User  Battery fuse  80A/58V  Rated charge current  60A  100A  Rated charge Power  750W/12V 1500W/24V 2250W/36V 3000W/48V  1250W/12V 2500W/24V 3750W/36V 5000W/48V  Max. PV open circuit voltage  150V¹ 138V²  MPP Voltage Range  (Battery Voltage +2V) ~108V³  Tracking efficiency  ≥99.5%  Conversion efficiency  ≤98.7%  Temperature compensate coefficient  -3mV/°C/2V(Default)  Self-consumption  98mA/12V;60mA/24V;50mA/36V;46mA/48V  Grounding  Common negative  Relay  Rated Value:5A/30VDC; Max. Value:0.5A/60VDC  RS485 interface  RS485(RJ45)  LCD backlight time  60S(Default)   1At minimum operating environment temperature; 2At 25°C environment temperature 3The maximum PV open circuit voltage must never exceed 138V or 180V at 25°C environment temperature. Item  Tracer6210/6415/6420AN  Tracer10415/10420AN  Dimension  340×236×119mm  394×242×143mm  Mounting dimension  260×224mm  300×230mm  Mounting hole size  Φ7  Terminal  2AWG(35mm2)  2AWG(35mm2)  Recommended cable  16mm2(5AWG)  35mm2(2AWG)  Weight  4.5kg  7.4kg  Download Manual   

For 12V Solar System: 1250W solar panel (150V for max input voltage 138V@ 25C) For 24V Solar System: 2500W solar panel (150V for max input voltage 138V@ 25C) For 48V Solar System: 5000W solar panel (150V for max input voltage 138V@ 25C) No Fan for silent operation, great for vans, boats or any live in spaces ​The AN tracer models have a current limiting function, you can connect twice the rated power to the controller ​so if your on a budget you can use a smaller controller with more panels so that you get more power in winter or low light but don't risk overloading the controller in the summer.  The output will be limited to the max listed above. Supports upto 8 units in parallel with a PTA adapter for communication and equalize of the paralleled units Tracer AN series controller, based on multiphase synchronous rectification technology (MSRT) and advanced MPPT control algorithm, with dual-core processor architecture and common negative design, has the features of high response speed, high reliability, and high industrial standard. MSRT can guarantee very high conversion efficiency in any charge power, which sharply improves the energy efficiency of solar system; Advanced MPPT control algorithm minimize the maximum power point loss rate and loss time, to ensure the tracking efficiency, corresponding speed as well as high conversion efficiency under high or low power, so that in any situation, Tracer AN products can rapidly track the maximum power point (MPP) of PV array to obtain the maximum energy of the panel. The limitation function of the charging power and current and automatic power reduction function fully ensure the stability when works with oversize PV modules and operate under high temperature environment. With the adaptive three-stage charging mode based on digital control circuit, Tracer AN series controllers can effectively prolong the life-cycle of battery and significantly improve the system performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power system. All-around electronic protections, including overcharging, over discharging, and PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for a longer service time. The isolated RS485 interface with standard MODBUS communication protocol and 5V power supply makes it easy for customer to expand the application, Support up to 8 charging in parallel to expand system and meet with different monitoring requirements, so that can be widely used for various applications, e.g. solar RV, household system and field monitoring, etc. Features CE certification(LVD EN/IEC62109,EMC EN61000-6-1/3) High quality & low failure rate components of ST and Infineon to ensure the product’s life Advanced MPPT technology & ultra-fast tracking speed is up to 99.5% guaranteed Maximum DC/DC transfer efficiency is as high as 98.7% Advanced MPPT control algorithm will minimize the MPP loss rate and loss time The accuracy of the recognition and tracking at the highest point of multiple-peaks MPP The wider range of MPP operating voltage. Auto control system to limit the charging power & current go over the rated value. Support 4 charging options: Sealed, Gel, Flooded and User. Battery temperature compensation function Real-time energy recording and statistical function Automatic over-temperature power reduction function Hundred percent full load operation in working environment temperature range within charging & discharging Support up to 8 units in parallel to expand system Load relay control external load switch signal to realize diversified load work modes The first and the second disconnection of load control, contain two relay’s contact. Auto-control of utility and generator relay design Utility or generator auto-control relays make it easy to compose the hybrid power system The remote temperature and the voltage sensor design will collect accurate data of battery temperature and voltage Isolated RS-485 with 5VDC/200mA to protect output for no power devices with MODBUS protocol To monitor or set the parameters by using the phone Apps or PC software. Protection: PV Over Current/power • Night Reverse Charging • Battery Overheating PV Short Circuit Battery Over Voltage Controller Overheating PV Reverse Polarity Battery Over Discharge TVS High Voltage Transients Item  Tracer6415AN  Tracer10415AN  Nominal System Voltage  12/24/36/48VDCVDC or Auto  Battery Input Voltage Range  8V~68V  Battery Type  Sealed/Gel/Flooded/User  Battery fuse  80A/58V  Rated charge current  60A  100A  Rated charge Power  750W/12V 1500W/24V 2250W/36V 3000W/48V  1250W/12V 2500W/24V 3750W/36V 5000W/48V  Max. PV open circuit voltage  150V¹ 138V²  MPP Voltage Range  (Battery Voltage +2V) ~108V³  Tracking efficiency  ≥99.5%  Conversion efficiency  ≤98.7%  Temperature compensate coefficient  -3mV/°C/2V(Default)  Self-consumption  98mA/12V;60mA/24V;50mA/36V;46mA/48V  Grounding  Common negative  Relay  Rated Value:5A/30VDC; Max. Value:0.5A/60VDC  RS485 interface  RS485(RJ45)  LCD backlight time  60S(Default)  1At minimum operating environment temperature; 2At 25°C environment temperature 3The maximum PV open circuit voltage must never exceed 138V or 180V at 25°C environment temperature. Item  Tracer6210/6415/6420AN  Tracer10415/10420AN  Dimension  340×236×119mm  394×242×143mm  Mounting dimension  260×224mm  300×230mm  Mounting hole size  Φ7  Terminal  2AWG(35mm2)  2AWG(35mm2)  Recommended cable  16mm2(5AWG)  35mm2(2AWG)  Weight  4.5kg  7.4kg  Download Manual 

THE NEW VFXR-SERIES 7 Features In One Device GENERATOR MODE - CONNECT THE VFXR TO ANY GENERATOR: 1. Cover current consumption 2. Charge batteries SUPPORT MODE- CONNECT THE VFXR TO ANY INVERTER TO EXPAND THE OUTPUT POWER: 1. Cover consumption with your inverter (any brand) 2. Cover your additional consumption with the VFXR (in cooperation with any brand) GRID TIED MODE - INJECT EXCESSIVE POWER TO THE GRID: 3. Charge your batteries 4. Sell not consumed power to the grid UPS MODE - USE THE BATTERIES IF THE GRID FAILS: 5. Cover consumption with the grid 6. In case of grid failure, switch to batteries without interruption GRIDZERO MODE - USE THE GRID IF SOLAR POWER IS NOT AVAILABLE AND COVER HIGHER LOADS WITH SMALL INVERTERS: 7. Cover consumption with solar power (even with small inverters) 8. Take additional power from the grid to double the output of your inverter MINI GRID MODE - USE THE GRID WHEN BATTERIES ARE LOW: 9. Cover consumption with solar power 10. Connect to the grid when batteries are low BACKUP MODE - COVER GRID FAILURES WITH YOUR SOLAR SYSTEM: 11. Cover consumption with the grid 12. In grid failure, switch to solar system The latest, most advanced features on the industry’s most trusted and proven platform—that’s the essence of OutBack’s new FXR Series of Grid/Hybrid inverter/chargers. Capable of off-grid or grid-connected operation in a single model, the FXR Grid/Hybrid inverter/chargers provide system designers with unprecedented flexibility and compatibility for nearly any power conversion scenario. The new FXR features and technologies on the acclaimed FX platform include: Both off-grid and grid-tied functionality in one unit Seven programmable modes, including GridZero and Support Mode, and built-in networked communications Advanced Battery Charging (ABC) with expanded charging voltages and time parameters, enabling system designers to accommodate the specific charging profiles and algorithms of new and emerging energy storage technologies including Lithium Ion, Aqueous Ion and Flow Chemistry batteries Easy system upgradability in the field FXR inverter/chargers can be paired with a MATE3 to add OPTICS RE to monitor and control system performance from any location. Available in power ranges from 2000W-3000W, multiple units may be stacked and connected with other OutBack Power electronics for more seamless system integration and the ability to function in a wide variety of applications, and system sizes. Up to nine inverters can be combined in a 3-phase system with the 12V, 24V or 48V models, and up to 30kW in a grid-tied 24V or 48V system. The exclusive modular system architecture means that increased power output is just an additional FXR inverter/charger away. Available in sealed or vented units with NEMA type 1 die-cast aluminum chassis designed to operate in the harshest environmental conditions such as high temperatures, humidity or corrosive salt air, the FXR’s continue in OutBack’s tradition of absolute dependability in mission critical installations no matter how harsh or challenging the conditions. Please Note: The new VFXR range only work with a Mate 3 (the standard Mate or Mate B will not work with them) Info and Specs on Outback site

DC 24V to 12V 240W 20A DC to DC Voltage Step-Down Module Aluminium Shell Shockproof High effecicncy conversion at 95%, great for running small 12V applicances off your 24V batteries, perfect for 12V LED lights, or having a 12V lighter socket to plug in standard 12V equipment. Feature:     Module properties: non-isolated step-down module     Input voltage: DC 24V (18-35V)     Output voltage: DC 12V     Output power: 240W     Rectifier mode: synchronous rectification     Conversion efficiency: up to 95%     Soft-start time: about 500mS     Output ripple: 50mV (MAX) 20M bandwidth     Operating temperature: industrial grade (-40 ° c to +85 ° c)  ( if Ambient temperature More than 40 ° c, please reduce power use, or enhance heat dissipation)     Full load temperature rise: 50 ° c     Load Regulation: ± 1%     Voltage Regulation: ± 2%     Dynamic response speed: 5% 200uS     Input polarity protection: None (please series the diode at the input port)  

A stand alone DC bus bar 600Amp, 70 Volt DC. Tin plated copper bus bar with stainless steel stud terminals, M10 nuts and black plastic cover Please view the Data sheet under the downloads tab for further details and product dimensions    

A stand alone DC bus bar 600Amp, 70 Volt DC. Tin plated copper bus bar with stainless steel stud terminals, M10 nuts and black plastic cover. Please view the Data sheet under the downloads tab for further details and product dimensions    

Varta Professional Dual Purpose Key Benefits Designed for standard motorhomes, caravans and boats with low or moderate energy demands Long-lasting – up to twice the cyclic stability of conventional flooded batteries (up to 200 cycles @ 50% DOD) Minimal self-discharge makes them ideal for seasonal use Ideal for dual power applications (can be used for both starting and overall energy supply) Can also be use for small stand alone off grid systems, living vehicles, traffic management, automatic gates, meteorological stations, river height/flood warning systems, shed/workshop power supply. Capacity: 180AH CCA: 1000A Width: 223mm Length: 513mm Height: 223mm Weight: 45kgs Comes with tapered automotive style battery posts. Consider adding https://www.bimblesolar.com/battery-terminals-m8-pair in order to terminate cables.        

Varta Professional Dual Purpose Key Benefits Designed for standard motorhomes, caravans and boats with low or moderate energy demands Long-lasting – up to twice the cyclic stability of conventional flooded batteries (up to 200 cycles @ 50% DOD) Minimal self-discharge makes them ideal for seasonal use Ideal for dual power applications (can be used for both starting and overall energy supply) Can also be use for small stand alone off grid systems, living vehicles, traffic management, automatic gates, meteorological stations, river height/flood warning systems, shed/workshop power supply. Capacity: 90AH CCA: 800A Width: 175mm Length: 353mm Height: 190mm Weight: 25kg Comes with tapered automotive style battery posts. Consider adding https://www.bimblesolar.com/battery-terminals-m8-pair in order to terminate cables.  

Varta Professional Dual Purpose Key Benefits Designed for standard motorhomes, caravans and boats with low or moderate energy demands Long-lasting – up to twice the cyclic stability of conventional flooded batteries (up to 200 cycles @ 50% DOD) Minimal self-discharge makes them ideal for seasonal use Ideal for dual power applications (can be used for both starting and overall energy supply) Can also be use for small stand alone off grid systems, living vehicles, traffic management, automatic gates, meteorological stations, river height/flood warning systems, shed/workshop power supply. Capacity: 140AH CCA: 800A Width: 189mm Length: 513mm Height: 223mm Weight: 37kgs Comes with tapered automotive style battery posts. Consider adding https://www.bimblesolar.com/battery-terminals-m8-pair in order to terminate cables.  

Replament fan kit for FX, VFX and GS Outback inverters.  Fan with harness attached. Inverter requires dismantling to replace.  

Integrated BMS and safety switch The SuperPack batteries are extremely easy to install, not needing any additional components. The internal switch will disconnect the battery in case of over discharge, over charge or high temperature. The batteries can be connected in parallel. Series connection is not allowed.  Note: The Victron Lithium Superpack does not have the same discharge current capacity as the Victron Lithium Smart. Please compare the data sheets of both batteries to ensure they suit your application or ask us.