7.38kWp Ground Mounted PV, with a 48V Off grid Sunsynk 5.0kW Hybrid Inverter bundle and 9.6kWh of Pylon US5000 Battery storage.
This a complete domestic scale off grid system(AC distribution and wiring not included) with ground mount. Providing 3.6kW of inverter power at an exceptional price.
The Sunsynk hybrid Inverter manages power flow from multiple sources such as solar, main electrical grid and generator. This Sunsynk inverter comes paired with 9.6Wh of Pylon US5000 battery storage and over 4.9kWp of Hyundai DG series Solar panels (30 year warranty)
The Sunmodo Ground mount, for use on firm ground soil and comes complete with ground screws to provide a light weight low profile frame.
This bundle is also available: with Sunsynk 5.12kWh batteries and is interchangeable with: Canadian solar and Perlight solar PV panels if prefered.
Please contact us if you need assistance in amending this bundle.
Made from high quality light weight Aluminium, this has a very low profile, standing at less than 1.4m in height !
Suitable for mounting directly into the soil, this is perfect for the homeowner who does not want expensive and messy concrete footings.
Designed for panels with a maximum dimension of 2300mm x 1300mm x 30mm.
Please reference your panel make & model in the order notes.
NB: If 35mm panel clamps are required please highlight this and request them on the notes in your order.
These Sunmodo ground-mount kits are suitable for mounting in firm soil without rocks, so please ensure you have tested your soil prior to purchase.
Please check all your dimensions technical drawings found on the downloads tab.
This Ground mount is designed to mounti 6 panels in landscape (2 rows with 3 modules each). It has 6 legs and four horizontal rails.
Designed for the following maximum admissible loads:
Other characteristics
Please use a dimension of 4U per module when sizing a cabinet for these batteries.
If you want to use these batteries with Victron equipment please read this article to select the correct equipment:
https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom
Here is the link to register your batteries and receive extended warranty:
https://en.pylontech.com.cn/service/registration
The SunSynk 5kW AC ECCO 6.5kWp Inverter is the next generation of super hybrid inverter with a 6500W MPPT and a rated AC output of 5kW resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as;
Installations with Sunsynk products now need to be registered here to gain full activation of the warranty.
SEG (smart Energy Guarantee) with integration to Octopuse Energy on the Sunsynk app Smart energy
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 10m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black
Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link
Wire size range: 6mm2
A set of battery brackets which allows vertical stacking of the Pylon US5000 battery unit. 1 set required per battery.
The Lynx Power In contains a positive and negative busbar with 4 connections for batteries, loads or chargers and a ground connection. It is part of the Lynx Distribution system and is available in two versions, with M8 or M10 busbar. Note that M10 refers to the busbar connection joints where the modules are connected to each other. The fuse and cable connections are always M8.
For the Lynx product that accepts the mega fuses see: https://www.bimblesolar.com/victron-lynx-distributor
**Please note: these fuse holders are designed to be opened in a specific way (see attached diagram in downloads section for guidance). Failure to follow the correct method will result in damage to the fuse holder, which is not covered by warranty.**
Fuse holder for NH type fuses, suitable for protecting and isolating cables between the battery and inverter or PV charge controller and the battery. Integrated handle enabling use as an isolator.
The 2 pole holder can be used to fuse and isolate both positive and negative at the same time, all in the same device or the positive conductor from two charge controllers for example.
NH00 rated at 250VDC, 160A,
Choose NH00 or NH000 fuses separately
Product measures 170mm H X 84mm W X 80mm D. Surface mountable.
LB Series DC Switch Disconnects comply with the latest specifications for modern low voltage devices. Outstanding electrical characteristics of LB Switches with compact design, contribute to space saving installation and operational convenience. Basic construction and design of the switch makes it compact, safe and highly reliable. The switch uses polyamide glass filled material, having excellent track resistance (CTI) for Insulation to prevent flashover even in the most severe conditions. The special contact design and configuration makes the switch highly reliable to withstand high short circuit currents.
Features
Applications
Enclosure Technical
Comes with a really handy key for checking connections when the cover is off .
Knock outs are also screw in which is really easy
Pylon battery cable accessory kit for use with all the different battery models. Each battery unit includes the interlink battery cables for parallel connection to another battery, whereas this pack is for connecting to the inverter/charger.
Please check the number of cable packs you need, according to your inverter/charge specifications. Each cable pack is rated at 100A continuous, and 125A peak.
This cable pack includes the following cables:
2 x 2m long power cables (1x positive and 1x negative) The cables are 25mm² and have an M8 eyelet on one end of each cable.
NH00 high capacity fuses suitable for protection of cables from batteries to inverters or charge controllers.
Fuses are rated at 250VDC
Hazard warning label pack for solar PV system
Contains all the warning labels you need for an on grid, on roof solar PV installation.
Photo is indicitive.
25mm squared cable end lug for crimping onto 25mm² multi-stranded battery cable. Heavy duty lug with flared cable entry. Tin plated copper. Made in the UK
Battery | |
Watt Hours | 5120 |
Chemistry | LFP |