Solis new 5G Hybrid inverter range that supprt power for important loads during load shedding as well as saving power during peak demands. Making this the ideal solution you always wanted. 

Product Features

• Fanless design IP65

• High charge and discharge efficiency

• Multiple work modes resulting in max self-consumption

• Intelligent  BMS function

• 24 hour real-time intelligent energy management 

• Remotely control & upgrade

The US2000C is a 48V battery storage system provided by Pylontech, developed with their own lithium iron phosphate cell to ensure the highest safety, value and most promising life cycle. A self designed BMS protects the cell from abormal temperature, current, voltage, SoC and SoH.

The Pylontech US2000C has an incredible DoD of 95% 

Advantages

• Vertical industry integration ensures cycle life of 6000 cycles 
• Compact and fashionable design fits in your home environment
• Deliver up to 2.4kW* with single module (2.4KWh) - * please note this value is inverter/charger dependant, typically the maximum sustained value is 1.2kW per battery
• Modular design gives customers the power of choice of capacity
• Compatible with large number of Hybrid inverters
• Simple buckle fixing minimise the installation time and cost
• Provides pre-charge function to protect ESS system from surge current. 
• Up to 16 units can be stacked in parallel

You can now register the Pylon US2000C for an additional 3 years of manufacturer warranty for free. Go to http://www.pylontech.com.cn/service/support and complete the information in the 'sign up battery' page. 

The US2000C can be used to expand an existing US2000 bank. Please note, the US2000C needs to be used as the master battery when used to expand an existing US2000 bank.

MAX DISCHARGE AND CHARGE RATE IS ONLY APPLICABLE FOR +- 60 SECONDS The maximum allowed voltage is 53.5V, please ensure that you check the inverter settings are below this BEFORE plugging in the UTILITY/SOLAR to the inverter.

If you want to use these batteries with Victron equipment please read this article to select the correct equipment:

https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom

A set of battery brackets which allows vertical stacking of the Pylon US2000B battery unit. 1 set required per battery.

Pylon battery cable accessory kit for use with the US2000B, US2000B Plus and Phantom-S models. Each battery unit includes the interlink battery cables for parallel connection to another battery, whereas this pack is for connecting to the charger.

You require one cable pack per system for the following batteries, with a maximum of 5 x US2000B batteries or 3 x US3000 or 2 x UP5000. With a system of more batteries than mentioned, an additional cable pack would be required accordingly. 

This cable pack includes the following cables:

2 x 2m long power cables (positive and negative) The cables are 25mm² and have an M8 eyelet on one end of each cable.

1 x 3.5m RJ45 Communication cable (Not for CAN communication)

One pole fuse holder for NH type fuses, suitable for protecting and isolating cables between the battery and inverter or charge controller and battery. Integrated handle enabling use as an isolator.

NH00 rated at 250VDC, 160A

Choose NH00 or NH000 fuse separately

Item dimensions 170mm H X 42mm W X 80mm D

NH000 high capacity fuses suitable for protection of cables from batteries to inverters or charge controllers.

Fuses are rated at 250VDC