Pylon US5000 4.8kWh Li-Ion Solar Battery 48V (excl. brackets)

A new battery in the US series from Pylontech. The US5000 is a 48V battery with incredible features to provide a competitive edge in the market. 

Please use a dimension of 4U per module when sizing a cabinet for these batteries.

Product Features

• Modular design for ease of expansion
• Higher usable capacity resulting in less battery modules installed
• Usable capacity 4 560Wh
• Parallel Capability of up to 16 units
• Allows for large installation of up to 72.96kWh with no LV Hub
• Intelligent BMS protecting battery cells
• 95% DoD with more usable capacity
• RS485 and CAN compatible
• Comes with a 5-year warranty extendable
• Long cycle life and superior performance
• Compatible with tier 1 inverter brands
   

If you want to use these batteries with Victron equipment please read this article to select the correct equipment:

https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom
 

Here is the link to register your batteries and receive extended warranty:

https://en.pylontech.com.cn/service/support/

The SunSynk 5kW AC ECCO 6.5kWp Inverter is the next generation of super hybrid inverter with a 6500W MPPT and a rated AC output of 5kW resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as;

• Dual MPPT design 
• Compatible with Lithium-ion batteries and Lead Acid batteries
• Up to 50kWh battery pack
• 5yr warranty as standard
• IP65 rated
• Anti-islanding protection
• Fully programmable power export
• Automatic switching from Grid-Tied to Off-Grid mode
• Up to 16 units with the same firmware can be paralleled 

Installations with Sunsynk products now need to be registered here to gain full activation of the warranty.  

SEG (smart Energy Guarantee) with integration to Octopuse Energy on the Sunsynk app Smart energy

Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.

(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 10m lengths, MC4 to bare wire.)

Double Insulated UV protected solar cable

Max load: 70A in air

Our solar cable is ozone resistant according to BS EN 50396

UV resistant according to HD 605 S2 and is tested for durability according to EN 60216

Flexible tinned copper conductor

Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black

Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link

Wire size range: 6mm2

The Lynx Power In contains a positive and negative busbar with 4 connections for batteries, loads or chargers and a ground connection. It is part of the Lynx Distribution system and is available in two versions, with M8 or M10 busbar. Note that M10 refers to the busbar connection joints where the modules are connected to each other. The fuse and cable connections are always M8.

For the Lynx product that accepts the mega fuses see: https://www.bimblesolar.com/victron-lynx-distributor

A set of battery brackets which allows vertical stacking of the Pylon US5000 battery unit. 1 set required per battery.

LB Series DC Switch Disconnects comply with the latest specifications for modern low voltage devices. Outstanding electrical characteristics of LB Switches with compact design, contribute to space saving installation and operational convenience. Basic construction and design of the switch makes it compact, safe and highly reliable. The switch uses polyamide glass filled material, having excellent track resistance (CTI) for Insulation to prevent flashover even in the most severe conditions. The special contact design and configuration makes the switch highly reliable to withstand high short circuit currents.

Features

• Compact and reliable
• Finger protection
• Easy installation
• Wiping contacts
• Excellent switching and high short circuit capacity

Applications

• Photovoltaic - Isolators
• Isolator
• Main Switch
• Emergency ON/OFF
• Inverter Applications
• AC / DC Changeover in Solar Pumps

Enclosure Technical

• Degree of Protection: IP66
• Switch rear mounted for easy connection
• Enclosure colour: Dark grey base and light grey cover.
• Switch mounted in ABS enclosure.
• Round padlocking device (Max.3 padlocks) to prevent the Switch from being made ON by unauthorised personnel
• Interlock Feature (Cover opens only in OFF position)
• 4 + 4 Knockouts so two strings can be wired (500V / String)
• M12 Knockouts suitable for MC4 Connectors
• Switch rated at 1500V

Comes with a really handy key for checking connections when the cover is off .

Knock outs are also screw in which is really easy

Pylon battery cable accessory kit for use with all the different battery models. Each battery unit includes the interlink battery cables for parallel connection to another battery, whereas this pack is for connecting to the inverter/charger.

Please check the number of cable packs you need, according to your inverter/charge specifications. Each cable pack is rated at 100A continuous, and 125A peak.

This cable pack includes the following cables:

2 x 2m long power cables (1x positive and 1x negative) The cables are 25mm² and have an M8 eyelet on one end of each cable.

NH00 high capacity fuses suitable for protection of cables from batteries to inverters or charge controllers.

Fuses are rated at 250VDC

Hazard warning label pack for solar PV system

Contains all the warning labels you need for an on grid, on roof solar PV installation.

Photo is indicitive.