Charge your Electric Vehicle from Solar. This kit is designed for charging your car at night, it has NiFE batteries to store the solar power and then charge your EV from the stored solar energy.
This is a 48V bank of NiFe batteries with 40 cells with Auto Watering System
IRFTS Shadow Solar mounting frames are compatible with all types of 60 cells - 6" PV modules fitted in a landscape orientation, and can be used for ground or wall mounted installations. It is also compatible with optimisers and micro-inverters.
The well-designed configuration is a watertight solution that allows a high level of ventilation to maximise the efficiency of the PV installation and is the most complete solution currently available on the market.
Ideal for energy production and sun protection, the mounting structure has a range of applications for residential, commercial, public, agricultural and industrial building such as a carport, canopy, patio awning, lobby entrance, bike shelter etc.
The anthracite grey aluminium profile includes a rainwater harvesting network, under-panel protection and optional panel side flashing. The structure also allows modules to be fitted easily from underneath, reducing H&S risks with installation.
View the installation video.
Frequently asked questions...
What size modules will fit?
60 Cell modules within dimensions below
Length 1635mm to 1676mm
Width 986mm to 1001mm
Depth 30mm to 46mm
What is the roof pitch of the carport?
Pitch is 5 degrees
NOTE – Please check with the module manufacturers installation manual that your chosen panel can be installed at this inclination.
How is it fixed to the ground?
Each leg will need to be buried in to concrete footings to secure to the ground
Please ensure you adhere to the manufacturers installation instructions
Do you need to inform planning or building control?
This can vary according to area so always check with the local departments to ensure compliance
Are there any additional options?
We sell additional flashing covers for the sides of the modules (not the carport) which are available at an extra cost
Download the datasheet from the IRFTS website for full product details.
FLEXPower ONE VFXR System 3kW 24V
This is a complete pre-wired outback system ready to go, it includes breakers so you simply wire to your batteries and away you go. We have been using outback equipment for The Bimble Inn for over 10 years and can highly recommend them. They are solid reliable units with a 5 year warranty. This pre-wired system is great way to have an advanced system professionally wired together as a plug and play system!
Pre-wired system includes
OutBack’s pre-assembled and pre-wired FLEXpower systems are now equipped with the updatedFXR Series Grid/Hybrid inverter/chargers. This means that the most advanced Grid/Hybrid inverter features are now available on the industry’s most trusted and proven systems platform, for unmatched flexibility and value.
The FLEXpower ONE FX-R Series is ideal for residential and commercial applications including cabins, vacation homes, farm buildings, remote communications sites and back-up power systems, with all necessary components integrated into a compact hang-on-the-wall system with a minimal footprint.
Highly efficient module giving 355W from a panel physically the same size as a 250W, great if you have limited space. 1686 X 1016 X 40mm
Better in low light than standard panels
LG NeON™2 355Wp solar PV module with black frame, features high efficiency 60 x LG NeON™ 2 monocrystalline cells. The LG NeON™ 2 has been designed to significantly enhance its output efficiency making it efficient even on limited roof areas.
LG NeON™ 2 has an enhanced performance warranty. The annual degradation has fallen from -0.7%/yr to -0.6%/yr. Even after 25 years, the cell guarantees 2.4%p more output than the previous NeON™modules.
The LG NeON™ 2 has been designed with aesthetics in mind; thinner wires that appear all black at a distance. LG NeON™ 2 now performs better on sunny days thanks to its improved temperature co-efficiency.
With its newly reinforced frame design, LG has extended the warranty of the NeON™ 2 for an additional 2 years. Additionally, LG NeON™2 can endure a front load up to 6000 Pa, and a rear load up to 5400 Pa.
Module dimensions: 1686 x 1016 x 40mm
Download Brochure to see how effecient and great in low light these panels are
The new V2 model is BS 7671 18th Edition ready and comes with integrated RCD and Earth fault detection. This eliminates the need to install an expensive Type B RCD or an earth electrode.
Zappi works like any regular charging point but has special eco charging modes which will benefit homeowners with grid-tied microgeneration systems.
The ECO+ charging mode will automatically adjust the charging rate to only make use of surplus power that would otherwise be exported from the property - which means that charging your car is effectively completely free!
The ECO mode is similar, but allows you to specify a minimum that should be put into the car by a particular time, in order to minimise use of imported power but still ensure you have sufficient charge to use the car.
In FAST charge mode, zappi operates like any ordinary EV charging station.
Zappi is a Mode 3 charging station, compatible with all electric vehicles that comply with SAE J1772, EN62196 and EN61851 plug-in electric vehicle standards.
If installing under the OLEV scheme, the myenergi hub is also required.
6mm² Solar Cable - Price is per meter, simply select the quantity as the number of meters you want.
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Class 5 flexible tinned copper conductor
Halogen-free cross-linked compound
Halogen-free cross-linked, flame retardant compound
35mm Cable - Use for connecting Batteries to Inverter M8 - M10 (M8 one end M10 on the other end)
You will need 2 cables, 1 for Positive and 1 for Negative
If you need a longer cable please let us know.
STÄUBLI MC4 Solar PV connectors - Pair
Connect your solar modules together with ease using these safe and durable genuine Staubli MC4 connectors. Snap-in lock. MC4 crimp tool required to make onto cable ends. https://www.youtube.com/watch?v=qjIdrBsim5s
Suitable for 4mm² and 6mm² solar cable with an outside diameter of 5.9 - 8.8mm, Part number: 32.0017P2000-UR & 32.0016P2000-UR
|Connector system||Ø 4 mm|
|Rated voltage||1500 V DC (UL) 1000V DC (IEC)|
|Rated current||39 A 4/6mm cable|
|Rated impulse voltage||12 kV|
|Ambient temperature range||-40 °C...+85 °C (TUV)|
|Upper limiting temperature||105 °C (TUV)|
|Degree of protection, mated unmated||IP65 1hr IP68 1min|
|Overvoltage category/Pollution degree||CATIII / 3|
|Contact resistance of plug connectors||≤0.25 mΩ|
|Safety class||1000 V DC: II|
|Contact material||Copper, tin plated|
|Locking system (UL)||Locking type|
|UL recognized component, in accordance with UL 6703||
*Please note male and female refers ot the metal conductor and not the plastic insulator*