Charge your Electric Vehicle from Solar. This kit is designed for charging your car at night, it has NiFE batteries to store the solar power and then charge your EV from the stored solar energy. It can be configured as a hybrid system so that any additional power would come from the grid, or as an off grid system to charge your EV in remote areas.
IRFTS Shadow Solar mounting frames are compatible with all types of 60 cells - 6" PV modules fitted in a landscape orientation, and can be used for ground or wall mounted installations. It is also compatible with optimisers and micro-inverters.
The well-designed configuration is a watertight solution that allows a high level of ventilation to maximise the efficiency of the PV installation and is the most complete solution currently available on the market.
Ideal for energy production and sun protection, the mounting structure has a range of applications for residential, commercial, public, agricultural and industrial building such as a carport, canopy, patio awning, lobby entrance, bike shelter etc.
The anthracite grey aluminium profile includes a rainwater harvesting network, under-panel protection and optional panel side flashing. The structure also allows modules to be fitted easily from underneath, reducing H&S risks with installation.
View the installation video.
Frequently asked questions...
What size modules will fit?
60 Cell modules within dimensions below
Length 1635mm to 1676mm
Width 986mm to 1001mm
Depth 30mm to 46mm
What is the roof pitch of the carport?
Pitch is 5 degrees
NOTE – Please check with the module manufacturers installation manual that your chosen panel can be installed at this inclination.
How is it fixed to the ground?
Each leg will need to be buried in to concrete footings to secure to the ground
Please ensure you adhere to the manufacturers installation instructions
Do you need to inform planning or building control?
This can vary according to area so always check with the local departments to ensure compliance
Are there any additional options?
We sell additional flashing covers for the sides of the modules (not the carport) which are available at an extra cost
Download the datasheet from the IRFTS website for full product details.
Designed for rough ambient conditions for stand alone or grid back up operation. Rated to give a power output of 3.0kW or 4.4kW for 30 min.
IP54 protection to allow outdoor installation if required.
High efficiency (>95%);
Low standby & idle consumption (25W/4W);
Operating temperature range of -25 to +60 deg C.
OptiCool system ensures high power in high temperatures by cooling the encapsulated transformer but keeping air ventilation away from coated circuit boards & electronics to ensure high protection for humid or salty atmospheres.
Inverters are used with the Sunny Island Remote Control which gives a single point of operation. One Remote Control is required per cluster of up to three inverters and includes integrated MMC/SD memory card reader to enable updates, transferring of parameter settings, for storing error/events lists, or data logging.
In single-phase systems only one SI3.0M-11 or SI4.4M-11 can be used. Three-phase systems can be achieved using a cluster of three SI3.0M-11 or SI4.4M-11 inverters, multi-cluster systems are not possible with these inverters.
For larger single-phase or multi-cluster 3-phase systems please see the Sunny Island 6.0H/8.0H
325W JA Solar Panels Mono Percium - All Black Half Cell, 1689 X 996 X 35mm
Half Cell Advantages
Supplied with 1000mm output cables and QC4.10 connectors (connects to MC4s)
The latest in mono cell technology with passivated backside, local BSF and 4 Bus Bars from worldwide PV Cell leaders - JA Solar
First to reach >20.6% average cell efficiency in mass production
More Power Per m²
JA higher efficiency module type specially designed for UK rooftop market.
Maximise the kWp installation on the roof
Homogeneous Black Mono cells.
Black Frame for anti-glare and pleasing appearance.
Lower System Cost
Reduced installation and BOS cost
Excellent Low-light Performance
Enhanced spectral response at longer wavelength boosts low-light performance, which can produce more than 1% additional power compared with conventional module at system side.
Passed "3xMCS" TÜV SÜD Thresher Long life Accelerated Stress Tests.
Full range of PID-resistance tests
Harsh climate environment endurance tests
Full set of long-term reliability tests
Manufacturing inspected and certified by leading institutes such as PI-Berlin, Franhoeffer, Sgurr, OST and Solar-IF
100% in-house automatic manufacturing
2X 100% EL inspection ensuring defect-free production
Over 500MWp of JA Solar panels installed in the UK. 10GWp Worldwide.
Positive power tolerance: -0~+5W
Modules binned by current to improve system performance
Excellent mechanical load resistance: Certified to withstand high wind loads (2400Pa) and snow loads (5400Pa)
Use with Tracer MPPT's - for a single panel on a 12V system you can use a 30A MPPT with this panel.
This listing is for 1 panel, simply select how many you need in the quantity. There is NO MINIMIUM Order.
100% EASE AND COMFORT WITH SUNNY BOY 3.0 – 5.0
More than an inverter — the new Sunny Boy 3.0-5.0 — the next generation of the globally successful Sunny Boy 3000-5000TL.
Thanks to its integrated SMA Smart Connected service, this inverter offers true ease and comfort for PV system operators and installers. The automatic inverter monitoring by SMA analyzes inverter operation, immediately informs the installer of irregularities ensuring optimum service and maximum system availability.
The Sunny Boy 3.0-5.0 is ideal for solar power generation in private homes.
EASY INSTALLATION AND COMMISSIONING
It couldn’t be any easier: A system can be designed professionally and easily with Sunny Design. And thanks to its extremely light design and intuitive user interface, the Sunny Boy can be quickly installed – without having to open the inverter.
CONVENIENT AND FUTURE-PROOF
With the Sunny Boy, PV system operators and installers are always up-to-date. Additionally, thanks to current communication standards, intelligent energy management and SMA storage solutions can at any time be flexibly added to systems with the Sunny Boy.
Charging stations for home or private properties (indoors or outdoors)
The EVlink Wallbox is weatherproof and robust. It can therefore be used in tough environments: in homes and on private properties (condominium, corporate car park, hotel...)
Features: Charge control
> Simply connect the vehicle to the charging station: charging can start without specific action.
> Charging can be stopped and then restarted using the Stop/Start button.
> The charging power can be limited by any energy management device providing that this device is able to close a potential-free contact wired to the Wallbox.
Characteristics of the power supply network
> 220-240 V single-phase - 50/60 Hz for 3.7 and 7.4 kW charging stations
> 380-415 V three-phase - 50/60 Hz for 11 and 22 kW charging stations
> Earthing system: TT, TN or IT
Mechanical and environmental characteristics
> Ingress protection code: IP54
> Impact protection code: IK10
> Operating temperature: -30°C to +50°C
> Storage temperature: -40°C to +80°C
> Attached cable length: 4 m
> Energy management: deferred charging start or charging current limitation
(16 A to 10 A, 32 A to 16 A)
> By key lock
> 24 months for the entire EVlink range
6mm² Solar Cable - Price is per meter, simply select the quantity as the number of meters you want.
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Class 5 flexible tinned copper conductor
Halogen-free cross-linked compound
Halogen-free cross-linked, flame retardant compound
Panel mounted hydraulic-magnetic type circuit breakers that can be used for DC sources, inverters or load circuits.
35mm Cable - Use for connecting Batteries to Inverter M8 - M10 (M8 one end M10 on the other end)
You will need 2 cables, 1 for Positive and 1 for Negative
If you need a longer cable please let us know.
STÄUBLI MC4 Solar PV connectors - Pair
Connect your solar modules together with ease using these safe and durable genuine Staubli MC4 connectors. Snap-in lock. MC4 crimp tool required to make onto cable ends. https://www.youtube.com/watch?v=qjIdrBsim5s
Suitable for 4mm² and 6mm² solar cable with an outside diameter of 5.9 - 8.8mm, Part number: 32.0017P2000-UR & 32.0016P2000-UR
|Connector system||Ø 4 mm|
|Rated voltage||1500 V DC (UL) 1000V DC (IEC)|
|Rated current||39 A 4/6mm cable|
|Rated impulse voltage||12 kV|
|Ambient temperature range||-40 °C...+85 °C (TUV)|
|Upper limiting temperature||105 °C (TUV)|
|Degree of protection, mated unmated||IP65 1hr IP68 1min|
|Overvoltage category/Pollution degree||CATIII / 3|
|Contact resistance of plug connectors||≤0.25 mΩ|
|Safety class||1000 V DC: II|
|Contact material||Copper, tin plated|
|Locking system (UL)||Locking type|
|UL recognized component, in accordance with UL 6703||
*Please note male and female refers ot the metal conductor and not the plastic insulator*