Bimble Solar 120W Mono Panel

120W power, great for smaller applications and lighting.  These are 12V panels so you can use with PWM controllers to make a very cheap system.

Size: 860 x 700 x 25mm

MC4 ended premade solar cables are 60cm long each

Highlights

• 12V, suitable for charging batteries via PWM or MPPT charge controllers
• Monocrystalline
• Widely using of the most popular and mature type of modules for off-grid system.
• Leading manufacturing technology in PV industry, strictly controlling the quality of raw materials and the process of producing
• 100% EL inspection, ensures modules are defects free.
• Cells binned by current to improve module performance
• Anti reflective glass. Not only to increase the light absorption, but also to make the module has the function of self-cleaning in water environment, effectively reducing the power loss caused by dust.
• Outstanding performance in low-light irradiance environments.
• Excellent mechanical load resistance:Certified to withstand high wind loads(2400pa) and snow loads(5400pa).
• High salt and ammonia resistance
• Positive power tolerance:0-+5w
• Junction Box with cables and MC4 Connectors

Certificates

• SGS-TUV Certificate
• PID free Testing Certificate
• Salt-Mist Testing Certificate
• Ammonia-Corrosion Testing Certificate
• Fire Testing Certificate
• CQC Certificate
• IEC61215、IEC61730 Certificate
• ISO 9001:2008:Quality managent systems
• CE Certificate

Warranty

• 10 years product warranty
• 10-years 90% of Min. rated output power,and 25-years 80% of Min. rated output power warranty

We have packages for both off grid solar panel systems and on grid Installations. (see other listings)

Delivery

As these are small panels we use standard couriers - delivery is cheaper.

Or you can collect for FREE from Near Brighton, East Sussex

20A PWM EPever Solar Charge Controller with Dual USB ports and LCD display VS2024AU

The VS-AU controller is a common positive PWM charge controller with built in LCD display and USB port.The multiple load control modes enable it can be widely used on solar home system, traffic signal, solar street light, solar garden lamp, etc. 

Product Highlights

• Series PWM charging mode
• Full power working at working temperature range
• Multiple load control modes
• Adopt high quality, high-reliability international components brand
• Double USB design
• Segment LCD display design
• Real time energy statistics function
• Extensive electronic protection

Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.

(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)

Double Insulated UV protected solar cable

Max load: 70A in air

Our solar cable is ozone resistant according to BS EN 50396

UV resistant according to HD 605 S2 and is tested for durability according to EN 60216

Flexible tinned copper conductor

Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black

Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link

Wire size range: 6mm2

3 Way unit can hold our Tomzn DC and AC breakers

 Unit can hold the following options:

• 1 x AC RCBos
• 3 x DC breakers Under 80A (2 x DC breakers if under 63a and using cable entry glands)
• 1 x DC breakers 80A - 125A
• 1 x DC Breakers Under 63A AND 1 x DC Breaker 63A - 125A

Best practice would be to use this unit with no bigger than 10mm square cable and appropriately sized breakers if you are using it with glands for a water tight fit.  If you are using it in an environment that is already dry and dust free the use of glands may not be necessary.

This is an empty unit, you must add the breakers you need to your cart as well, see related items tab above to see the breakers that fit.  

You will also need suitable cable entry glands - please see related products tab.

This PV mounting kit fits 30mm frame depth Solar Panels only.

Contains:

4 x 20cm mini rail
4 x 30mm end clamp

No bolts or screws supplied.  Suitable bolts or screws are for you to purchase separately, the installer should give their own guidance as to which ones to supply.

We cannot guide you on this, as no one should give you remote advice on how to mount anything, without physically being there to advise appropriately.

Applications can be:

Profile metal roofing where the ridge of each corrugation is flat
Timber frames with appropriate wood screws.
Steel frames using appropriate bolts.
Fibreglass using appropriate nuts & bolts & backing plate.
Canal boat roofs, 
DIY ground mount frames, 
Shed roofs
Static caravans
Smallholdings

Unlimited panels in a row using the optional middle clamps - click here

- One of these kits for one panel.
- Two panels - two of these kits and one middle clamp kit.
- Three panels - three of these kits and two middle clamp kits
And so on...

Additional rubber strip provides a weather seal against moisture and can help prevent galvanic reaction if mounted on steel.  Be sure to seal your bolts or screws after fitting the rail with an appropriate sealant to prevent water ingress.

Do not install on moving vehicles.

These mounts are very basic, if there is any wind loading to consider you are responsible for adding additional mounts to suit your installation.

Bimble Solar are not responsible for your installation and any ramifications as a result of using this product.

STÄUBLI MC4 Solar PV connectors - Pair of Y Branches

Connect your solar modules together with ease using these safe and durable MC4 connectors.  This pair of "Y" shape connectors (one in a male to female, female configuration, and one in a female to male, male configuration) will allow you to connect panels or strings of panels together.  If you need to connect 3 panels together then it is cheaper to use 2 pairs of these than to purchase a 3 way splitter (its about 1/3 of the cost to use these)

Product information:

Middle clamps only to be used with the mini mounts - work with both 30mm and 35mm mini mounts

CLICK 'RELATED PRODUCTS' TAB TO SEE THE MINI MOUNTS

Contains:

2 x 20cm mini rail
2 x Middle clamp works with 30mm or 35mm panels

No bolts or screws supplied.  Suitable bolts or screws are for you to purchase separately, the installer should give their own guidance as to which ones to supply.

We cannot guide you on this, as no one should give you remote advice on how to mount anything, without physically being there to advise appropriately.

Applications can be:

Profile metal roofing where the ridge of each corrugation is flat
Timber frames with appropriate wood screws.
Steel frames using appropriate bolts.
Fibreglass using appropriate nuts & bolts & backing plate.
Canal boat roofs, 
DIY ground mount frames, 
Shed roofs
Static caravans
Smallholdings

Unlimited panels in a row using the optional middle clamps - click here

- One of these kits for one panel.
- Two panels - two of these kits and one middle clamp kit.
- Three panels - three of these kits and two middle clamp kits
And so on...

Do not install on moving vehicles.

These mounts are very basic, if there is any wind loading to consider you are responsible for adding additional mounts to suit your installation.

Bimble Solar are not responsible for your installation and any ramifications as a result of using this product.

Cable Gland Entry Box, use to connect through external surface.  Perfect for solar panel cables coming from outside to controller.

89mm x 99mm base - 50mm height (40mm top then slanting down to 17mm)

Affordable DC Breaker for 35mm DIN mount.  Use with our DIN Rail as an easy and affordable breaker solution.

Current Flows from top to bottom of the breaker: 
For charge controller wire top pole to charge controller and bottom pole to battery. 
For Inverter wire top pole to battery and bottom pole to inverter.

Affordable DC Breaker for 35mm DIN mount.  Use with our DIN Rail as an easy and affordable breaker solution.

Current Flows from top to bottom of the breaker: 
For charge controller wire top pole to charge controller and bottom pole to battery. 
For Inverter wire top pole to battery and bottom pole to inverter.