This is all the highest end equipment, offering you the best possible solution for your off grid set-up. With 3 SMA Sunny Islands and 24Kw of panels will give you huge charging capacity during the day. This is suitable for a large off grid house, farm or workshop. If you are a long way from a grid connection this is probablly much cheaper than getting connected to the grid, and then you will have no bills to pay for using it! With this system you can register for the FIT tarriff if installed by a registered MCS installer.
NEW 1000ah c20 (840 ah c5)
2 VOLT, DEEP CYCLE WITH TUBULAR POSITIVE PLATE, 1500 CYCLE LIFE EXPECTANCY TO 80% d.o.d
198mm x 119mm x 694.5mm height, 47.6kg wet
Charge Voltage Settings
Bulk/Absorb 2.40v per cell
Float 2.23v per cell
EQ 2.47v per cell
JA Solar 380W Mono MBB Percium Half-Cell Black Frame MC4 Dimensions: 1776 X 1052 X 35mm
Panels - Monocrystallines
JA Solar Large Wafer PERC Mono Half-Cell Multi Bus Bar Module.
This module has Black Frame and White Backsheet.
The Sunny Island 6.0H is ideal for people who strive to be as independent as possible and want to be actively involved in shaping their own energy supply. This is true both for new plants and for plant operators who would like to retrofit their existing PV plants to emphasize self-consumption more. The battery inverter fits to all PV-plant sizes, PV- inverters and batterie typs. Depending on local conditions, it can also integrate other renewable energy generators into the storage system, such as small wind turbines, hydroelectric power facilities and CHP plants.
Developed from the successful SI-5048 these inverters are rated to give a power output of 8kW for 30 min. IP54 protection to allow outdoor installation if required and increased operating temperature range of -25 to +60 deg C.
Inverters can be combined together to assemble higher power systems and used with the Sunny Island Remote Control which gives a single point of operation.
See more at: http://www.sma.de/en/products/battery-inverters.html
3 phase 20 kilo Watt grid connect solar inverter with 2 independant MPPT inputs
This inverter can also be used as part of an off grid system in conjunction with grid forming battery inverters such as the SMA Sunny Island or Victron Quattro.
Peak performance and technological perfection at a significantly reduced specific price: the new Sunny Tripower TL Economic Excellence is the next logical step in the development of the Sunny Tripower series in terms of achieving an optimum price-performance ratio. On the one hand, it brings with it a considerable reduction in investment costs, while on the other hand guaranteeing exceptionally high yields with an efficiency of 98.5 %. Hence, the Sunny Tripower TL Economic Excellence is the ideal solution for uniformly structured PV plants on the medium to very large scale. The focus is on the essentials and meets all requirements, including reactive power provision, grid support, and grid management integration.
Flexible and future-proof
6mm² Solar Cable - Price is per meter, simply select the quantity as the number of meters you want.
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Class 5 flexible tinned copper conductor
Halogen-free cross-linked compound
Halogen-free cross-linked, flame retardant compound
300A Battery isolator switch, 900A for 30 secs, up to 48 Volt, M10 connection. Can be use on 12, 24 or 48 Volt system as long as switch current rating is not exceeded.
M-SERIES BATTERY SWITCHES
300 Ampere continuous rating.
Battery Inter-connecting Cable - 35mm cable with M10 - M10 Lugs (M10 on both ends)
Made up to size for you for connecting your batteries together.
Use these to connect your battery banks so that the load is spread better and your batteries will last longer. You will need 2 per bank, 1 for Positive and 1 for Negative. We have an example of how to wire these on our installation diagrams page
Solid copper bus bar.
Manufactured from 25mm x 6mm high grade C101 solid copper bar
All connections are M8.
Total bar length 340mm.
Completed with quality GRP insulators.
We can make them as 5 way or 7 way if you prefer. Please specify this when you order if you want a smaller one.
Here is an example of wiring your batteries using the bus bar:
35mm Cable - Use for connecting Batteries to Inverter M8 - M10 (M8 one end M10 on the other end)
You will need 2 cables, 1 for Positive and 1 for Negative
If you need a longer cable please let us know.
STÄUBLI MC4 Solar PV connectors - Pair
Connect your solar modules together with ease using these safe and durable genuine Staubli MC4 connectors. Snap-in lock. MC4 crimp tool required to make onto cable ends. https://www.youtube.com/watch?v=qjIdrBsim5s
Suitable for 4mm² and 6mm² solar cable with an outside diameter of 5.9 - 8.8mm, Part number: 32.0017P2000-UR & 32.0016P2000-UR
|Connector system||Ø 4 mm|
|Rated voltage||1500 V DC (UL) 1000V DC (IEC)|
|Rated current||39 A 4/6mm cable|
|Rated impulse voltage||12 kV|
|Ambient temperature range||-40 °C...+85 °C (TUV)|
|Upper limiting temperature||105 °C (TUV)|
|Degree of protection, mated unmated||IP65 1hr IP68 1min|
|Overvoltage category/Pollution degree||CATIII / 3|
|Contact resistance of plug connectors||≤0.25 mΩ|
|Safety class||1000 V DC: II|
|Contact material||Copper, tin plated|
|Locking system (UL)||Locking type|
|UL recognized component, in accordance with UL 6703||
*Please note male and female refers ot the metal conductor and not the plastic insulator*
A small, low cost multimeter supplied with test leads and holster.
DMM Functions: DC Current, AC/DC Voltage, Continuity, Diode, Resistance, Transistor
No. of Digits: 3.5
DMM Response Type: Average
Display Count: 1999
Range Selection: Manual
Voltage Measure DC Max: 500V
Voltage Measure AC Max: 500V
Current Measure DC Max: 5A
Resistance Measure Max: 2Mohm