12V 100Amp 1.2Kw BMS for Lithium Titanium LTO Battery - CAN Bus, Bluetooth

12V 100Amp 1.2Kw BMS for Lithium Titanium LTO Battery - CAN Bus, Bluetooth
List Price: £59.83 +vat
£70 (inc vat) with 2.5% off for bank, card or cash payment
Pay Monthly Finance on orders from £700 - £30k
Availability: Pre-Order - More Due 18 June

12V 100Amp 1.2Kw Bimble LTO BMS Battery Management System 

BMS for continuous current of up to 100A charge or discharge.

Separate LTO BMS unit to connect to 30Ah LTO modules.  Connect up to 10 modules in parallel to this BMS.

  • Includes CAN Bus and Bluetooth communications to link to your inverter or smartphone.
  • Future Proof – as new communications technologies evolve you can simply replace the BMS to have the latest tech for your battery.
  • Reduces cost with 1 single BMS rather than a BMS per unit.
  • If electronics fail the BMS can easily and cheaply be replaced whilst keeping the same battery bank.
  • BMS has 5 Year Warranty
  • Battery Management System looks after your battery.

BMS functions:

  • Overcharge 
  • Over discharge 
  • Over current  
  • Short detection 
  • Temperature 
  • Balance 
  • Communicate 
  • Alarm 
  • Total capacity 
  • Storage history 

Charger settings:

Compatible with all MPPTs and Inverters including Outback, Victron and EPEver

  • If Lithium option select Lithium and set charge voltage to 16.2V
  • Other chargers set Charge/Float/Boost/Absorb: 16.2V
  • Equalise: Ideally disabled or if unable to disable then set to 0V or 16.2V

For fully off grid systems which do not have lithium support in their software then it may be necessary to add a small extra MPPT with 1 small solar panel to enable the BMS to wake up if it has shut down from low voltage.  The 10A Victron MPPT with a small panel will be sufficient for this.