Made from high quality light weight Aluminium, this has a very low profile, standing at less than 1.4m in height !

Suitable for mounting directly into the soil, this is perfect for the homeowner who does not want expensive and messy concrete footings.

Designed for panels with a maximum dimension of 2300mm x 1300mm x 30mm. 

Please reference your panel make & model in the order notes.

NB: If 35mm panel clamps are required please highlight this and request them on the notes in your order.

These Sunmodo ground-mount kits are suitable for mounting in firm soil without rocks, so please ensure you have tested your soil prior to purchase. 

Please check all your dimensions technical drawings found on the downloads tab.

This Ground mount is designed to mounti 6 panels in landscape  (2 rows with 3 modules each). It has 6 legs and four horizontal rails. 

Designed for the following maximum admissible loads:

• Wind load vref 46.0 m/s
• Snow load sk 1.436 kN/m²

Other characteristics

• 20° tilt
• Made from extruded aluminium.
• Twenty Five year warranty

The Dyness B51100 5.12kWh Lithium Battery Module has a powerful, high capacity design, which makes it ideal for residential and commercial storage applications. The battery utilises LFP technology for cell level monitoring and balancing, while the intelligent BMS effectively manages the module without the need for extra communication devices.

The battery has a compact, modular design and can be connected with 40 additional modules in parallel to meet the demands of the application. The unit is easy to install and is compatible with most leading inverter brands.

PRODUCT FEATURES

• High safety LFP – Cell level monitoring and balancing
• Modular design – Can be configured in parallel using the Dyness LV4 Rack System
• Scalable – Capacity from 5.12 to 204.8kWh (Up to 40 units in parallel)
• Wide application range – both residential and commercial storage applications
• Compatible with most leading inverter brands
• Compact design – easy install and maintenance

TECHNICAL SPECIFICATION

• Battery type: LiFePO4
• Nominal battery energy: 5.12kWh
• Nominal capacity: 100Ah
• Nominal voltage: 51.2V
• Working voltage range: 44.8 – 57.6V
• Net weight: 44kg
• Dimensions: 481 x 535 x 140mm (W x D x H)
• Warranty: 10 years
• Forward compatible with Dyness BX51100 Batteries

The parallel cables needed for connecting these batteries in parallel, for increased capacity, are included in the box with each module. Battery to inverter cables are sold separately.

The SunSynk 3.6kW AC ECCO 7kWp Inverter is the next generation of super hybrid inverter with a 7000W MPPT and a rated AC output of 3.68kW resulting in a system that can generate sufficient energy in Winter months to offset usage and charge a connected battery. The inverter boasts additional features such as;

• Dual MPPT design 
• Compatible with Lithium-ion batteries and Lead Acid batteries
• Up to 50kWh battery pack
• 5yr warranty as standard
• IP65 rated
• Anti-islanding protection
• Fully programmable power export
• Automatic switching from Grid-Tied to Off-Grid mode
• Up to 16 units with the same firmware can be paralleled 

Installations with Sunsynk products now need to be registered here to gain full activation of the warranty.  

SEG (smart Energy Guarantee) with integration to Octopuse Energy on the Sunsynk app Smart energy

Dyness Battery Cable Pack Set is a set of Red and Black cables for Dyness batteries. These cables are used for connecting to the inverter. The battery cable pack is an accessory for the Dyness range of rechargeable batteries. The battery cable pack is an accessory for the Dyness range of rechargeable lithium batteries.

You only need one pack per system as it contains the cables to connect. You need one pack per system. The Dyness Battery Cable Pack includes two cables connecting to each other, and an original charger unit (one pack per battery unit). 

• Colour: Red and Black.
• Length: 2060mm.
• Hole Dia: 8mm.
• CSA 35mm2

Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.

(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 10m lengths, MC4 to bare wire.)

Double Insulated UV protected solar cable

Max load: 70A in air

Our solar cable is ozone resistant according to BS EN 50396

UV resistant according to HD 605 S2 and is tested for durability according to EN 60216

Flexible tinned copper conductor

Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black

Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link

Wire size range: 6mm2

The Lynx Power In contains a positive and negative busbar with 4 connections for batteries, loads or chargers and a ground connection. It is part of the Lynx Distribution system and is available in two versions, with M8 or M10 busbar. Note that M10 refers to the busbar connection joints where the modules are connected to each other. The fuse and cable connections are always M8.

For the Lynx product that accepts the mega fuses see: https://www.bimblesolar.com/victron-lynx-distributor

**Please note: these fuse holders are designed to be opened in a specific way (see attached diagram in downloads section for guidance). Failure to follow the correct method will result in damage to the fuse holder, which is not covered by warranty.**

Fuse holder for NH type fuses, suitable for protecting and isolating cables between the battery and inverter or PV charge controller and the battery. Integrated handle enabling use as an isolator.

The 2 pole holder can be used to fuse and isolate both positive and negative at the same time, all in the same device or the positive conductor from two charge controllers for example.

NH00 rated at  250VDC, 160A,

Choose NH00 or NH000 fuses separately

Product measures 170mm H X 84mm W X 80mm D. Surface mountable.

LB Series DC Switch Disconnects comply with the latest specifications for modern low voltage devices. Outstanding electrical characteristics of LB Switches with compact design, contribute to space saving installation and operational convenience. Basic construction and design of the switch makes it compact, safe and highly reliable. The switch uses polyamide glass filled material, having excellent track resistance (CTI) for Insulation to prevent flashover even in the most severe conditions. The special contact design and configuration makes the switch highly reliable to withstand high short circuit currents.

Features

• Compact and reliable
• Finger protection
• Easy installation
• Wiping contacts
• Excellent switching and high short circuit capacity

Applications

• Photovoltaic - Isolators
• Isolator
• Main Switch
• Emergency ON/OFF
• Inverter Applications
• AC / DC Changeover in Solar Pumps

Enclosure Technical

• Degree of Protection: IP66
• Switch rear mounted for easy connection
• Enclosure colour: Dark grey base and light grey cover.
• Switch mounted in ABS enclosure.
• Round padlocking device (Max.3 padlocks) to prevent the Switch from being made ON by unauthorised personnel
• Interlock Feature (Cover opens only in OFF position)
• 4 + 4 Knockouts so two strings can be wired (500V / String)
• M12 Knockouts suitable for MC4 Connectors
• Switch rated at 1500V

Comes with a really handy key for checking connections when the cover is off .

Knock outs are also screw in which is really easy

NH00 high capacity fuses suitable for protection of cables from batteries to inverters or charge controllers.

Fuses are rated at 250VDC

Hazard warning label pack for solar PV system

Contains all the warning labels you need for an on grid, on roof solar PV installation.

Photo is indicitive.