Bimble Solar 120W Mono Panel
120W power, great for smaller applications and lighting. These are 12V panels so you can use with PWM controllers to make a very cheap system.
Size: 860 x 700 x 25mm
MC4 ended premade solar cables are 60cm long each
Highlights
Certificates
Warranty
We have packages for both off grid solar panel systems and on grid Installations. (see other listings)
As these are small panels we use standard couriers - delivery is cheaper.
Or you can collect for FREE from Near Brighton, East Sussex
20A PWM EPever Solar Charge Controller with Dual USB ports and LCD display VS2024AU
The VS-AU controller is a common positive PWM charge controller with built in LCD display and USB port.The multiple load control modes enable it can be widely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.
Product Highlights
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black
Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link
Wire size range: 6mm2
Best practice would be to use this unit with no bigger than 6mm square cable and appropriately sized breakers if you are using it with glands for a water tight fit. If you are using it in an environment that is already dry and dust free the use of glands may not be necessary.
This is an empty unit, you must add the breakers you need to your cart as well, see related items tab above to see the breakers that fit.
You will also need suitable cable entry glands - please see related products tab.
Product Depth | 114 mm |
Product Height | 160 mm |
Product Type | DIN Enclosure |
Product Width | 85 mm |
This PV mounting kit fits 30mm frame depth Solar Panels only.
Contains:
4 x 20cm mini rail
4 x 30mm end clamp
No bolts or screws supplied. Suitable bolts or screws are for you to purchase separately, the installer should give their own guidance as to which ones to supply.
We cannot guide you on this, as no one should give you remote advice on how to mount anything, without physically being there to advise appropriately.
Applications can be:
Profile metal roofing where the ridge of each corrugation is flat
Timber frames with appropriate wood screws.
Steel frames using appropriate bolts.
Fibreglass using appropriate nuts & bolts & backing plate.
Canal boat roofs,
DIY ground mount frames,
Shed roofs
Static caravans
Smallholdings
Unlimited panels in a row using the optional middle clamps - click here
- One of these kits for one panel.
- Two panels - two of these kits and one middle clamp kit.
- Three panels - three of these kits and two middle clamp kits
And so on...
Additional rubber strip provides a weather seal against moisture and can help prevent galvanic reaction if mounted on steel. Be sure to seal your bolts or screws after fitting the rail with an appropriate sealant to prevent water ingress.
Do not install on moving vehicles.
These mounts are very basic, if there is any wind loading to consider you are responsible for adding additional mounts to suit your installation.
Bimble Solar are not responsible for your installation and any ramifications as a result of using this product.
Middle clamps only to be used with the mini mounts - work with both 30mm and 35mm mini mounts
CLICK 'RELATED PRODUCTS' TAB TO SEE THE MINI MOUNTS
Contains:
2 x 20cm mini rail
2 x Middle clamp works with 30mm or 35mm panels
No bolts or screws supplied. Suitable bolts or screws are for you to purchase separately, the installer should give their own guidance as to which ones to supply.
We cannot guide you on this, as no one should give you remote advice on how to mount anything, without physically being there to advise appropriately.
Applications can be:
Profile metal roofing where the ridge of each corrugation is flat
Timber frames with appropriate wood screws.
Steel frames using appropriate bolts.
Fibreglass using appropriate nuts & bolts & backing plate.
Canal boat roofs,
DIY ground mount frames,
Shed roofs
Static caravans
Smallholdings
Unlimited panels in a row using the optional middle clamps - click here
- One of these kits for one panel.
- Two panels - two of these kits and one middle clamp kit.
- Three panels - three of these kits and two middle clamp kits
And so on...
Do not install on moving vehicles.
These mounts are very basic, if there is any wind loading to consider you are responsible for adding additional mounts to suit your installation.
Bimble Solar are not responsible for your installation and any ramifications as a result of using this product.
Cable Gland Entry Box, use to connect through external surface. Perfect for solar panel cables coming from outside to controller.
89mm x 99mm base - 50mm height (40mm top then slanting down to 17mm)
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.
Affordable DC Breaker for 35mm DIN mount. Use with our DIN Rail as an easy and affordable breaker solution.
Current Flows from top to bottom of the breaker:
For charge controller wire top pole to charge controller and bottom pole to battery.
For Inverter wire top pole to battery and bottom pole to inverter.