This kit was designed to be the easiest to wire up for absolute beginners.
We have included a 240v inverter and 240v lighting to keep it as simple as possible.
You have a spare 240v socket for items under 350w such as mobile phone chargers, laptop chargers etc.
The Vikram Solar Eldora Micro Series provides you a perfect partner for any small off-grid project.
120W power, great for smaller applications and lighting. These are 12V panels so you can use with PWM controllers to make a very cheap system.
Size: 1319 x 666 x 34 mm
Factory: ISO 14001:2004, ISO 9001:2008, BS OHSAS 18001:2007
Products: IEC 61215 Ed2, IEC 61730, IEC 62716, MCS, PV Cycle
Get 5% discount for Cash On Collection Payments
As theses are small panels we can use standard couriers for delivery so delivery starts at just £12.50 for the first panel.
Or you can collect for FREE from Near Brighton, East Sussex
Since 1926 Crown Battery has responded to the 'power' challenges and individual needs of industry leaders with the best available products and services in the field of heavy-duty commercial deep cycle batteries.
A company-wide dedication to quality control and continual improvement has earned Crown Battery the highest quality and service rating in the industry. We put more into our deep cycle batteries so you can get more out of them...
More performance, More Productivity with Less Maintenance. Nobody builds them like Crown, because no one else invests in the heaviest, thickest plates in the industry. Ours are over 10% thicker than our competitors.
Combine that with our proprietary PROeye and our low maintenance container - features that make battery maintenance predictable and efficient - and you've got a battery that's going to last longer and perform like no other.
Crown out-performs the competition in head to head tests over and over again.
It must be a matter of perspective. But we aren’t prone to exaggeration, the way some of our competitors are.
If you claim to have batteries that out-perform all others, an independent laboratory should confirm the findings. That’s the way we do it at Crown. Since 1926, that’s all we’ve done. And to us, it really isn’t a matter of claiming to be first in the industrial marketplace. But being the best. Some manufacturers are comfortable making exaggerated claims.
We’re comfortable making battery history… one customer at a time.
The heaviest, thickest plates in the industry. Thicker plates, heavier lead connections, and the most active lead material per ampere hour of rated capacity. And heavy means more lead, more active material. Which means more power. Longer life. Who would you put your money on? A lightweight battery? Or the heavyweight of the world. Crown.
|Nominal Capacity||105 AH (20hr rate),
85 AH (5hr rate)
|Nominal Voltage||12 volt|
|Reserve Capacity Minutes / Amps||165 mins @ 25 Amps|
|Product Foot Note||DIJKL (see product footnote key)|
|Charging||Please download the product data sheet for more information|
|Storage||Batteries should be stored in a dry and cool area in an upright position.Store batteries on a solid surface that can safely accomodate their weight. Batteries can be safely stocked two or three layers high by using a secure stacking surface placed between each layer. When stacking batteries in layers, take care to secure battery terminals against short-circuit and to block and brace batteries that prevents any movement of the battery group. Please note that batteries need periodic stock rotation and service charging to ensure peak performance.|
|A =||Automotive / SAE Top Terminal|
|D =||Standard Terminal (Dualo Automotive / Stainless Threaded Terminal)|
|F =||Commercial Threaded Stud Terminal|
|G =||Refer to Terminal Requirement Whn ordering Type A|
|I =||Cover with Raised Vent|
|J =||Battery Fitted with Handle or Lifting Lug|
|K =||PRO eye Fluid Indicator (Option for Gr 24/27/31)|
|L =||Antimony Alloy Construction: Low Maintenance Service|
Pure sinewave output, high peak power and high efficiency. Combined high frequency and line frequency technologies ensure the best of both worlds. Models range from 150VA to 3000VA per module.
VE.Direct allows use with VE.Direct Bluetooth adaptor to control the inverter via your phone or laptop.
|2 x Clip Light holders with 2m flex|
|2 x 10W LED Warm White Bulbs|
|1 x 3way Splitter 0.5m|
6mm Solar Cable - Price is per meter simply select the quantity as the number of meters you want.
Double Insulated UV protected solar cable
Max load: 50A
10A PWM Charge Controller - Up to 120w 12v / 240w 24v
3 control modes to choose:
3.Light and 15hours timer control(Settable)
For 12V Pv System: 120W Solar Panel,12V Lead-acid Battery,21V for Max input Voltage
For 24V Pv System: 240W Solar Panel,24V Lead-acid Battery,42V for Max input Voltage
This solar charge controller is designed for solar DC power supply system. MCU and professional software are applied as the control center to fulfill intelligent system control. LED will indicate the working state. It`s easy to turn on and turn off output through manual operation. And there are two optional voltage modes, 12V and 24V.
1.1PCS Solar Contorller
2.1PCS User Manual
Can be used for all panels
Short and Open Circuit protection
Full specification available if required
Fail Safe and cannot be damaged by accidental wiring mistakes
Advanced design with simple plug and play technology. No need for complicated adjustments
Full LED status indication: State of Charge(SOC) Red-Flat Battery: Amber-Low charge: Green- good charge: Green Flashing- Full Charge
MCU and professional software are used as the control center to fulfill intelligent system control, along with PWM high efficiency charging way. Boost, recovery and float charging auto work for battery long-life and with temperature compensation. It has high accuracy over discharging control by the discharging rate, over-discharging control voltage modified by the battery discharging rate curve. Our controller has the function of self protection from overload, outside and inside short circuit, reverse connection, thunder and lightning, PV panel reverse current, over charging and discharging etc. During the short circuit and overload protection, no any component will be damaged and need change, including fuse. The LED will indicate the working state of the system in charging, overcharging power full, power low, over-discharging, over load, out short circuit, load on/off and etc. Our products meet the industrial production standard with wide temperature running area -35℃ to +55℃.
10I: 12 Volt or 12/24 Volt auto work, 10 Amps (for PV and load)
20I: 12 Volt or 12/24 Volt auto work, 20 Amps (for PV and load)
Equalisation voltage: 14.8Volt
High voltage disconnect(HVD): 14.4Volt
Float voltage: 13.6Volt
Low voltage disconnect(LVD) 11.1Volt
Low voltage reconnect(LVR): 12.6Volt
Self-consumption: 6mA maximum
Temperature compensation: -30mV/℃/12V
Terminals: for wire sizes to 6mm2
Temperature: -35℃ to +55℃
Solar Panel LED:
Green ON when solar is charging Battery.
Green blink when the syetem over voltage
Green ON when battery level in the right range
Green Slowly flashing when battery level full
Yellow ON when battery level low
RED ON when loads cut off.
RED ON when the output is on
RED slowly flashing when it`s over load
(the load amps is 1.24 times of rated current for 60 seconds,or the load amps is 1.5 times of rated current for 5 seconds.)
RED blink when the load is short -circuit.
This controller has Light and Timer control Function
Light control:When daylight starts to occur then the light source goes off. Meanwhile the Solar Panels will charge the batteries. when there is no sunlight the garden light will switch on.
Time control:There is an eight hours time control,that means it will go off when the Lights automatically switch off after 0-15 hours.
Lighting control Option
1.Press the power switch for 5 seconds and select the desired LIGHTING CONTROL option.The LED is on,which confirmed you have selected the right one.
2.The controller requires 10 munites of countinuous transiton values before it starts to work.These constraints avoid false transitions due to lighting or dark storm clouds.
3.10 minutes off before the controller start to work
4.A brief description follows belows:
|Number 0:||Dusk-to-Dawn,light is on all night|
|Number 1:||Light is turn on after sundown for 1 hour.|
|Number 2:||Light is turn on after sundown for 2 hour.|
|Number 3:||Light is turn on after sundown for 3 hour.|
|Number 4:||Light is turn on after sundown for 4 hour.|
|Number 5:||Light is turn on after sundown for 5 hour.|
|Number 6:||Light is turn on after sundown for 6 hour.|
|Number 7:||Light is turn on after sundown for 7 hour.|
|Number 8:||Light is turn on after sundown for 8 hour.|
|Number 9:||Light is turn on after sundown for 9 hour.|
|Number 0:||Light is turn on after sundown for 10 hour.|
|Number 1.:||Light is turn on after sundown for 11 hour.|
|Number 2.:||Light is turn on after sundown for 12 hour.|
|Number 3.:||Light is turn on after sundown for 13 hour.|
|Number 4.:||Light is turn on after sundown for 14 hour.|
|Number 5.:||Light is turn on after sundown for 15 hour.|
|Number 6.:||Lights remain turn off ,ON/OFF mode|
|Number 7.:||Test Mode,lights on after it dects no light,lights off after it defects light.|