Charge both your starter battery and leisure battery at once from 1 solar panel. Made by EPsolar who make our popular Tracer MPPTs.
Please note, if running a long cable to one of your batteries please ensure you use a thick enough cable. Please use this volt drop caclulator to see your losses on the cable you plan to use.
·Two battery charging eliminates the extra cost of two separate solar charging system
·Intelligent System Optimum Control
·12/24V auto work
·Battery type selection
·Charging frequency optional
·High efficient Series PWM charging
·Local external temperature compensation
·Remote temperature sensor optional
·Use MOSFET as electronic switch, without any mechanical switch
·Remote meter MT-1 optional
·Electronic protection: over charging, short circuit, battery reverse polarity protection
Electrical parameters |
|
System voltage |
12 / 24VDC Auto work |
Nominal battery current |
10A,20A |
Charge circuit voltage drop |
≤0.26V |
Discharge circuit voltage drop |
≤0.15V |
Self consumption |
≤6mA |
Working temperature |
-35℃ to +55℃ |
Humidity |
10%-90% NC |
Enclosure |
IP30 |
Terminal |
4mm2 |
Net weight |
0.24kg |
Battery voltage parameters (temperature at 25°C) |
|||
Battery charging setting |
Sealed |
Flooded |
Gel |
Equalize charging voltage |
14.4 V;x2/24V |
14.6V;x2/24V |
14.8V;x2/24V |
Boost charging voltage |
14.2V;x2/24V |
14.4V;x2/24V |
14.6V;x2/24V |
Float charging voltage |
13.7V;x2/24V |
13.7V;x2/24V |
13.7V;x2/24V |
Max. solar voltage |
30V(12V system),55V(24V system) |
||
Battery voltage range |
8-15V(12V system),8-30V(24V system) |
||
Self-consumption |
4mA at night, 10mA at charging |
||
Meterbus connection |
8-pin RJ-45 |
||
Temp. compensation |
-5mv/℃/2V |
Cable Connection | |
Type and size | See Manual |
Size mm2 | See Manual |
Manufacturer Warranty | |
Standard Warranty: | 2 years all products. 3 years batteries from the manufacturer's shipping date or 4000 cycles (whichever comes first) |