Ideal for glamping tents or structures that need simple lighting and USB sockets.
Use the LOAD OUT of the controller to keep the battery happy by running lights and USBs from the controller, which you can set to switch off at 12.0v and keep your batteries happy and your guests from killing your battery!
Use some of the 6mm solar cable to wire from the controller to the USB socket.
VRLA AGM: design life 7-10 years
VRLA GEL: design life 12 years
VRLA GEL 2 Volt cells: design life 20 years
The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches.
The GEL model range offers best deep cycle durability and overall longer life. The use of high purity materials and lead calcium grids ensure that for both AGM and GEL products have particularly low self-discharge so that they will not go flat during long periods without charge. Both ranges are supplied with M8 drilled, flat copper terminals ensuring best possible connection contact and eliminating the need for battery terminals. The batteries are compliant with both CE and UL specifications in ABS fireproof containers and come with Victron's 2 year world-wide warranty.
Victron 90W Mono Solar Panel
90W power, great for smaller applications and lighting. These are 12V panels so you can use with PWM controllers to make a very cheap system.
Size: 780 x 668 x 30mm, please see the downloads tab for full specification.
This panel has pre punched mounting holes on the rear frame. The holes are on the longest end at 18cm in from each end so two holes on each long side.
BlueSolar Panels
• Low voltage-temperature coefficient enhances high-temperature operation.
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• 25-Year limited warranty on power output and performance.
• 5-Year Limited warranty on materials and workmanship.
• Sealed, waterproof, multifunctional junction box gives high level of safety.
• High performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• Pre wired quick-connect system with PV-ST01 connectors.
We have packages for both off grid solar panel systems and on grid Installations. (see other listings)
As these are small panels we use standard couriers - delivery is cheaper.
Or you can collect for FREE from Near Brighton, East Sussex
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
MPPT: Ultra Fast Maximum Power Point Tracking
By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.
Remote Monitoring and Control
Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, anytime, anywhere; both services are free to use. For remote installations - even when there is no internet connection or phone signal nearby - you may be able to monitor your MPPT by bluetooth-pairing with a LoRaWAN (long-range wide area network) device, available optionally.
Load output
The intelligent Load output function prevents damage caused by running batteries 'flat'. You can configure the voltage at which SmartSolar disconnects a load - thereby preventing excessive drain on your batteries. And here's the clever bit: SmartSolar will attempt a 100% recharge every day. If it can't - during periods of poor weather - it raises the disconnect voltage, daily, until it achieves success. We call this feature BatteryLife because it maintains the health, and extends the life of your battery.
Premade 6mm Solar Cable with Male to Female MC4 connectors, quick and easy to install.
(Please note if using as a cable run from panel to controller, you would cut in half giving you 2 x 5m lengths, MC4 to bare wire.)
Double Insulated UV protected solar cable
Max load: 70A in air
Our solar cable is ozone resistant according to BS EN 50396
UV resistant according to HD 605 S2 and is tested for durability according to EN 60216
Flexible tinned copper conductor
Conductor
Class 5 flexible tinned copper conductor
Insulation
Halogen-free cross-linked compound
Sheath
Halogen-free cross-linked, flame retardant compound
Sheath Colour
Black
Fitted with Staubli 4-6mm MC4s - Staubli MC4 Link
Wire size range: 6mm2
Specification
HAR approved. Flat flexible cable with white PVC insulation for indoor applications. Copper conductor. BS 6500.
12V LED Fairy Lights - 10m string, coper wire that can be bent into any shape!
Specification
Durable and heat-resistant copper wire.
Flexible copper wire can easily string up how you want (don't bend tightly).
Can last for 50000+ hours! If one light goes out the rest remain lit!
Please Note: When installing do not trap the wires between objects that could crush the cables, and do not wrap tightly around screws or nails, this can brake the wires and then cause the lights to short out.
LED Quantity: 100LEDs
Chips:3014 SMD
Length: 10meter
Power: DC12V
Connector: 2.1mm barrel socket
Max 6w
Light colour: warm white
Wire color: Copper
Modes: Steady on
12V Dual USB socket, slim surface mount, simply screw to the wall!
Net Weight: Approx.42g/1.5oz
Color: Black
Material: ABS
Working Temperature: -25°C -80°C
Maximum Power: 16W
Input Voltage: DC10V-23V
USB Output Voltage: 5V
USB Output Current: 3.1A
12V Edison COB Filament Globe Light E27 Screw In 4W Warm White Light Bulb - replaces 50W Incandescent Bulb
Dimensions: 64mm width, 139mm long with fitting, 120mm long without fitting
Watts:4W
Voltage: AC/DC 12-36V
CCT:WW2700K
Base:E26/E27
Lumen:400lm
This PV mounting kit fits 30mm frame depth Solar Panels only.
Contains:
4 x 20cm mini rail
4 x 30mm end clamp
No bolts or screws supplied. Suitable bolts or screws are for you to purchase separately, the installer should give their own guidance as to which ones to supply.
We cannot guide you on this, as no one should give you remote advice on how to mount anything, without physically being there to advise appropriately.
Applications can be:
Profile metal roofing where the ridge of each corrugation is flat
Timber frames with appropriate wood screws.
Steel frames using appropriate bolts.
Fibreglass using appropriate nuts & bolts & backing plate.
Canal boat roofs,
DIY ground mount frames,
Shed roofs
Static caravans
Smallholdings
Unlimited panels in a row using the optional middle clamps - click here
- One of these kits for one panel.
- Two panels - one of these kits and one middle clamp kit.
- Three panels - one of these kits and two middle clamp kits
And so on...
Additional rubber strip provides a weather seal against moisture and can help prevent galvanic reaction if mounted on steel. Be sure to seal your bolts or screws after fitting the rail with an appropriate sealant to prevent water ingress.
Do not install on moving vehicles.
These mounts are very basic, if there is any wind loading to consider you are responsible for adding additional mounts to suit your installation.
Bimble Solar are not responsible for your installation and any ramifications as a result of using this product.
E27 Simple Holder Light Socket Fitting - can use for 12V or 240V
Material: Iron + Ceramic
Size: 40*45mm
Maximum current: 4A
Maximum voltage: 230V
Maximum overload capacity: 660W
Suit for bulb diameter: 25mm
Diameter of adapter: 9.6mm
Miniature Chrome Toggle Switch - Surface mount for 12V Lighting
Features
· Surface mount, miniature single pole, single throw toggle switch.
· Connections made by screw terminals on base.
· Suitable for low voltage applications only
Technical Specifications
Maximum Voltage : 12V
Maximum Current : 3A
Connection Type : Screw Terminal
Base Diameter : Æ 28mm
Fixing Centres : 20mm
Fixing Hole Dia. : 2.8mm
Body Height : 15mm
12V or 24V Frosted Edison COB Light E27 Screw In 3W Warm White Light Bulb - replaces 50W Incandescent Bulb
Type: 6SMD 3W COB White Cover
Color: Warm White
Voltage: 9V-30V DC
Power: 3W
Gross Weight: 35g
Size: 8.8*5.3*8.8CM
These little connectors are fantastic, they make wiring so easy, simply put the wires together and then twist the connector over the bare ends. Works for up to 6mm cables to join 2 x 6mm cables together.
Swept-wing design for comfort
Live-action, square-wire spring
Hexagonal shape for standard nutdriver
No pre-twisting required and is fully re-useable
Accept solid, stranded and flexible wires
UL Listed and CSA Certified
Shell rated for 105°C
Flame-retardant shell
Rated at 41A/600V