Simplybook
Simply the best!
Firstly, Laura was amazing! She provided a level of service that quite simply was brilliant and faultless. She knew what to get for our budget and spec'd a panel with all the gubbins to match. Brilliant. The warehouse staff were also amazing, nothing was too much and they were incredibly friendly! Top notch company, top notch staff!
Availability: In Stock - Delivery 1-5 days or collect from Lewes
Victron 90W Mono Solar Panel
90W power, great for smaller applications and lighting. These are 12V panels so you can use with PWM controllers to make a very cheap system.
Size: 780 x 668 x 30mm, please see the downloads tab for full specification.
This panel has pre punched mounting holes on the rear frame. The holes are on the longest end at 18cm in from each end so two holes on each long side.
BlueSolar Panels
• Low voltage-temperature coefficient enhances high-temperature operation.
• Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
• 25-Year limited warranty on power output and performance.
• 5-Year Limited warranty on materials and workmanship.
• Sealed, waterproof, multifunctional junction box gives high level of safety.
• High performance bypass diodes minimize the power drop caused by shade.
• Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
• A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
• Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
• Pre wired quick-connect system with PV-ST01 connectors.
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
New XTRA series - 3rd Generation MPPT
For 12V Solar System: 130W solar panel (60V for max input voltage)
For 24V Solar System: 260W solar panel (60V for max input voltage)
No Fan for silent operation, great for vans, boats or any live in spaces
With built in LCD advanced display and programming screen (XDS2)
New XTRA series has Lithium battery support
The XTRA tracer models have a current limiting function, you can connect 1.5 times the rated power to the controller so if your on a budget you can use a smaller controller with more panels so that you get more power in winter or low light but don't risk overloading the controller in the summer. The output will be limited to the max listed above.
New EPEver (Tracer) series is EPsolar’s third generation of MPPT controller.
XTRA series are advanced maximum power point tracking (MPPT) charge controllers, for off grid photovoltaic systems, with display unit.
In order to maximise the energy harvest from PV arrays and simultaneously minimise the power loss within a wide range of operating conditions, XTRA series apply an advanced smart algorithm which results in up to 30% higher efficient charging, compared to a conventional pulse width modulation (PWM) charge controller. Xtra series controller have limit protection function on charging current &charging power, as well as auto derating power operation at high temperature; the above protection ensure the stability of system even at exceeded rated PV power and over temperature conditions.
Protection class IP32 and isolated RS485 communication port further improve the controller’s reliability under different application requirements. XTRA series controllers incorporate a self-adaptive three-stage charging algorithm based on a digital control circuit, which effectively prolongs the lifespan of battery and significantly improve the system performance. It also has extensive electronic protection for overcharge, over discharge, PV&battery reverse polarity and etc. to ensure the sustainability and durability of the off grid solar system.
Features:
Advanced MPPT technology & ultra-fast tracking speed is up to 99.5% guaranteed
Maximum DC/DC transfer efficiency is as high as 98%, full load transfer efficiency is up to 97.4%
Wide MPP operating voltage range
Low temperature protection and self activate function for lithium battery charging
Limit charging power & current over rated range
Real-time energy statistics function
Multiple load work modes
Comprehensive electronic protection
Compatible with lead acid and lithium-ion¹ batteries
Over temperature protection and power degrading in higher temperature
Optional LCD display units (XDB1/XDS1/XDS2) and accessories
High quality and low failure rate components of ST or IR to ensure service life
Isolated RS485 communication port with 5V/200mA protected output, with standard Modbus protocol Monitor and set the parameters via APP or PC software
Dustproof and waterproof design with IP32² protection class
CE certification(LVD IEC62109,EMC EN3/1-6-61000)
¹ If using Lithium battery, customer should use “PCsoftware” to set the lithium battery parameters
² Ingress of solid objects:Protected against solid objects over 2.5mm
² Ingress of liquids: Protected against falling drops of water, if the case is disposed up to 15 from vertical
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
Seven piece solar panel mounting kit in black ABS.
The set includes 6 brackets (4 corners and 2 sides) and cable entry gland.
These mounts are ideal for fixing our solar panels to any vehicle, caravan, boat, barge or even outbuildings and sheds to provide a strong, secure and aesthetically pleasing fixing method.
The mounts will support the solar panel at 25mm above the surface enabling airflow underneath which keeps it cool, ensuring the solar panel functions at it's optimum.
General mounting guidance:
If using with panels equal to or under 175W, you can secure the panel by screwing or bolting it to the mounting corner. The corner itself can be fixed with a good strong adhesive like 'Sikaflex' or 'CT1' which we sell in black white or clear. See related products tab. This removes the need to drill holes in your roof!
You must ensure the roof is clean and dry before attaching. If a painted roof ensure the paint is not flakey.
If you are using panels over 175W in size we recommend that not only do you bolt or screw the panel to the corners but additionally bolt or screw the mounting to the roof as well.
If fitting any panel to a vehicle we would recommend the belt and braces approach of bolting or screwing the panel to the mounts and additionally bolt or screw the mounts to the roof. The strength of these systems is only as strong as the roof type or paint on your roof!
Notes:
- ABS mounts raise the panel by 25mm. Edge of panel to edge of ABS is 55mm.
- You need to purchase additional self tappers or bolts to fit the panel to the ABS mounts, see below for one method which is a good tutorial to get you started...
Availability: In Stock - Delivery 1-3 days or collect from near Lewes
For use with our stick down panels and ABS mounting kits - also great for sealing cable holes
CT1 will successfully bond:
Metals (including lead)
Glass
Mirrors
Wood
Polystyrene
Unique adhesion on virtually any material in most applications without the need for additional fixings. CT1 is the ultimate solution for sealing.
Excellent resistance to chemicals
Prevents fungal growth
UV resistant
Excellent resistance to vibration
Food safe - conforms to ISEGA Standards
Works in wet or dry conditions
Perfect for marine and boating maintenance, accident and emergency repairs
Can be used in all salt-water environments
Odourless
Does not shrink
Can be painted
Contains no solvents
No isocyanates
Unique flexibility
Environmentally compliant
Instant repair and bonding with fibre glass and carbon fibre materials
Application
Apply with a standard cartridge caulking gun or pneumatic version at approximately 6 bar (108psi)
Drying Time
Skin cure 23ºC 50% R.H. 8 minutes
Non-adhering 23ºC 50% R. 25minutes
Full cure time 23ºC 50% R.H. 24hrs - 6mm (48hrs - 7/12mm)
Customise This Bundle
You can alter this bundle to suit your needs, simply click the button below to add all the items to your cart separately, you can then edit your cart as you need.
 (1)-54x54.jpg)
